• Journal of Broadcast Engineering
• /
• v.17 no.3
• /
• pp.437-446
• /
• 2012

A face detection algorithms using two-dimensional (2-D) intensity or color images have been studied for decades. Recently, with the development of low-cost range sensor, three-dimensional (3-D) information (i.e., depth image that represents the distance between a camera and objects) can be easily used to reliably extract facial features. Most people have a similar pattern of 3-D facial structure. This paper proposes a face detection method using intensity and depth images. At first, adaboost algorithm using intensity image classifies face and nonface candidate regions. Each candidate region is divided into $5{\times}5$ blocks and depth values are averaged in each block. Then, $5{\times}5$ block rank pattern is constructed by sorting block averages of depth values. Finally, candidate regions are classified as face and nonface regions by matching the constructed depth map based block rank patterns and a template pattern that is generated from training data set. For template matching, the $5{\times}5$ template block rank pattern is prior constructed by averaging block ranks using training data set. The proposed algorithm is tested on real images obtained by Kinect range sensor. Experimental results show that the proposed algorithm effectively eliminates most false positives with true positives well preserved.

• Journal of Korean Society for Atmospheric Environment
• /
• v.33 no.5
• /
• pp.480-496
• /
• 2017

CMAQ (Community Multiscale Air Quality)-HDDM (High-order Direct Decoupled Method) simulations with MICS-Asia 2010 and INTEX-B 2006 emissions inventories were performed to investigate the impact of Chinese $NO_x$ and VOC emissions on 1-hr ozone concentrations over South Korea during May to July in 2014. Chinese $NO_x$ and VOC emissions in MICS-Asia 2010 were 60% higher and 100% lower than those in INTEX-B 2006 during the simulation period. It makes the ratio of Chinese VOC to $NO_x$ emissions in INTEX-B 2006 (Case 1) is 3.2 times higher than that in MICS-Asia 2010 (Case 2). When the observed period mean 1-hr ozone concentration averaged across 106 air monitoring sites in the SMA (Seoul Metropolitan Area) was 37.6 ppb, the modeled values were similar to each other; 37.3 ppb for Case 1, and 40.4 ppb for Case 2. Both cases show that daily maximum 1-hr ZOC (Zero-Out Contribution) of Chinese $NO_x$ and VOC emissions were as high as 55 ppb and 35 ppb for the episode respectively. Correlation coefficients between ZOC of Chinese $NO_x$ and VOC emissions and the SMA daily maximum 1-hr ozone were 0.49~0.69. It indicates that Chinese emissions occasionally affect the SMA daily ozone peaks. On the other hand, Case 2 predicted 7 ppb and 1 ppb higher ZOC of Chinese $NO_x$ and VOC emissions than Case 1, when simulated ozone in the SMA is over 80 ppb. It implies that upwind $NO_x$ emissions would be more important than upwind VOC emissions for the long-range transport of ozone in Northeast Asia.

• Journal of the Korean Applied Science and Technology
• /
• v.36 no.4
• /
• pp.1208-1218
• /
• 2019

The study is on the cosmetic solubilizing power of organic plant surfactants. The blended high purity polyglyceryl-10 oleate and polyglyceryl-10 stearate mixtures were synthesized using organically certified raw materials to develop surfactants having excellent solubilizing power. The mixture is called "Solubil ORG-1300". The appearance of this material is a pale yellowish paste, with a specific odor. The specific gravity was 1.12 and it was high purity that acid value was 0.072±0.1. The HLB value of this natural surfactant was averaged = 15.1 and calculated through the Griffin equation. Mechanically it is explained how organic surfactant are available with fragrance and oils. The solubilizing test was determined by eye evaluation method through the dissolving performance test for the two oils and measured the transmittance at 890 nm using a UV spectrophotometer to measure the transparency. The results showed that the concentration of surfactant needed to make Bergamot oil available requires approximately more 2 times. It was also found that the concentration of surfactant needed to make the tocoperyl acetate available was about 8 times higher. Experiments on the solubility resulting from pH changes showed stabilized usable solubilizing power even in acidic areas of pH=3.5, neutral areas of pH=7.2, and alkaline areas of pH=1.5. Experiments on the solubility according to pH variation showed good solubility stabilized in acidic areas of pH=3.5, neutral areas of pH=7.2, and alkaline areas of pH=11.5. As an application of cosmetics, the company successfully developed a prescription for moisturizing activity based on these results, it is expected that a wide range of applications will be available for skin care, baby lotion, sensitivity or atopic skin cosmetics.

• Journal of Acupuncture Research
• /
• v.15 no.2
• /
• pp.105-116
• /
• 1998

Purpose In this study, We observed the recovery process in the ability to move in the hind limbs of the rats whose spinal cord injuries were treated by Radix acouniti(RA). The purpose of this study is to see the effects of Radix acouniti(RA) water extract on the contraction of rat's spinal cord injury. Procedure First, the rats were subjected to hemisectional spinal cord injuries by a scalpel blade. Those rats, then, were divided into three groups: Sham operated rats group and the experimental group, which received the Radix acouniti(RA) water extract, and the control group, which had no treatment. Their recovery in the ability to walk was observed by the Open Field Test (OFT) for 14 days after the injuries. Method The OFT was applied at four points: the hip, knee, ankle joint, and the tail. Each joint was given a movement rating of from 0 to 3, depending on the amount of movement. A movement rating of 0 designates no movement, a 1 designates slight movement, a 2 designates increased movement, and a 3 designates active movement. Slight movement is defined as a joint displaying less than or equal to 30% of that joint range, increased movement is displaying less than or equal to 60% of that joint's range, and active movement is greater than or equal to 90% of that joint's range. Tail movement is also graded on a scale of 0 to 3. A rating of 0 indicates that the tail is down 100% of the time, one of 1 indicates that the tail is down more than 10%, one of 2 shows that the tail is down less than 50% but more than 10% of the time, and one of 3 shows that the tail is down less than 10% of the time. All four ratings were added together and then averaged to arrive at a single score. Results The sham group which did not go through spinal cord injuries showed near normal results on all 3 joints and tail from right after the operation, which one would expect. The RA oral application group showed more effective recovery of movememt function than the control group around 4 days after the spinal cord injuries. However, after 14 days, both groups displayed almost the same degree of movement recovery. The results of this study are summarized as follows: 1. After 14days the spinal cord injuries, movement was recovered in sham operated group, control group, and experimented group in the hip, the knee, the tail and then the ankle of rats, in that order. 2. Around 7 days after the spinal cord injuries, the experimental group proved the effectiveness of the therapy in terms of movement recovery. 3. The level of ALT, ALP, AST in RA treated group was slightly increased. 4. The level of BUN and creatinine in RA treated group was slightly increased. The above results indicate that RA therapy at an early stage can bring about better movement recovery in patients with spinal cord injuries from traffic accidents or industrial disasters. But there is apparent side effect of RA on clinical, therefore the study on this should be continued.

• Child Health Nursing Research
• /
• v.20 no.4
• /
• pp.294-303
• /
• 2014

Purpose: The purpose of this study was to identify the correlation of critical thinking disposition and problem solving process, and the simulation- based assessment of clinical competence based on a survey of college nursing students. Methods: In this descriptive correlation study, data for 214 nursing students were analyzed using t-test and Pearson correlation coefficients. Results: Critical thinking disposition, problem solving process, and simulation-based assessment of clinical competence averaged $3.76{\pm}0.46$ (out of 5), $3.67{\pm}0.47$ (5), and $1.51{\pm}0.17$ (2), respectively. A significant difference in scores for simulation-based assessment of clinical competence was found between the high-scoring group and low-scoring group in critical thinking disposition. A significant positive correlation was found between critical thinking disposition and nursing assessment, a sub-domain of clinical competence. Conclusion: The results suggest that success in simulation-based learning requires critical thinking disposition in the nursing students, and their critical thinking disposition plays a positive role in nursing assessment, which evaluates the patient's status in a complex situation. Simulation-based learning programs help assess the students' levels in their clinical judgement and performance, and identify their strengths and weaknesses so that the instructor can evaluate and improve the current teaching method.

• Korean Journal of Ichthyology
• /
• v.23 no.3
• /
• pp.198-205
• /
• 2011

Early life history of the endangered species, Gobiobotia macrocephala was investigated to provide baseline data for biological characteristics and recovery. Adult fish were sampled by spoon net at Hongcheon-gun, Gangwon-do, Korea in April to June 2010. The female's eggs were obtained by injecting Ovaprim and fertilized by dry method in the laboratory. The mature eggs were slightly adhesive and transparent with greyish and average 0.89${\pm}$0.04mm in diameter. The hatching of the embryo took place in about 107 hours after fertilization under water temperature of 23$^{\circ}C$ and newly hatched larvae were average 4.6${\pm}$0.16mm in total length. At 4 days after hatching, they were average 6.1${\pm}$0.20mm in total length and their yolk sacs were completely absorbed. From 15 days after hatching, they entered the juvenile stage and reached at 8.6${\pm}$0.67mm in total length. At the 100 days after hatching, their band patterns and external form were similar to those of adults, and they averaged 31.5${\pm}$3.32mm in total length.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.33 no.4
• /
• pp.307-311
• /
• 2007

Purpose: The aim of this study was simply assessing linear measurements in the lateral and medial approach, respectively, for bone harvesting using anatomic and three-dimensional(3D) computed tomographic(CT) analyses on a dried cadaveric proximal tibia. In addition, the availability of the three-dimensional computed tomographic(3D-CT) analysis was also estimated. Materials and methods: Ten dried proximal tibia were obtained from five Korean cadavers. Four the reference points, the SM(superior-medial), IM(inferior-medial), SL(superior-lateral), and IL(inferior-lateral) were marked around the tibial tuberosity. The PM(posterior-medial) and PL(posterior-lateral) points were randomly marked at points farthest from the lateral and medial reference points, respectively, in the posterior border of the superior articular surface of both condyles. All measurements were obtained on the dried proximal tibia. After computed tomography had been performed, the three dimensional images were reconstructed using V works $4.0^{TM}$(Cybermed Inc., Seoul, Korea), and the length between the reference points were measured three dimensionally using the method described above. The error between the mean actual and mean 3D-CT measurements was calculated in order to determine the availability of the three dimensional computed tomographic analysis. Results: The length between the reference points was greatest at the IL-PM, which averaged $65.39mm{\pm}10.35$. This was followed by the SL-PM with $63.24mm{\pm}8.10$, the IM-PL with $58.09mm{\pm}10.02$, and the SM-PL with $51.99mm{\pm}9.06$. The differences between the IL-PM and SM-PL were 13.4 mm. The mean values were 55.04 mm in the medial approach and 64.32 mm in the lateral approach, and the differences between medial and lateral were 9.28 mm. The error between the mean actual and mean 3D-CT measurements was 0.31% and the standard deviation was 0.28%. Conclusion: The anatomical and three dimensional computed tomographic analysis indicates that there was only a 9.28 mm linear difference between the lateral and medial approach. This is consistent with previous studies, which showed that there was little difference between the two approaches in terms of the bone volume. In addition, the error(0.31%) and the standard deviation(0.28%) were considered low, demonstrating high accuracy of 3D-CT. Therefore it can be used in preoperative treatment planning.

• Fire Science and Engineering
• /
• v.34 no.1
• /
• pp.18-25
• /
• 2020

In this study, the heat release rate of pipe insulation is analyzed by considering the installation status in accordance with the standards ISO 20632 and NFPA 274. The flame retardation rate was evaluated for six types of test samples: polyethylene foam covered with beaten silver (PE(S)), PE foam tapped (PE(N)), elastomeric closed cell thermal insulation (rubber), Japanese PE foam (PE(J)), Japanese polyurethane foam (PU(J)), and Japanese styro form (ST(J)) by EN 13501-1 and fire growth curve. The results show that PU(J), PE(J), and PE(N) were Class E and ultra-fast, NFPA 274 test standards for Class D and Fast, and PE(S) by ISO 20632 were Class C and Slow, and Rubber and ST(J) were Classes and Low. However, the changes in the time-averaged maximum heat release rate for each test standard (ISO 20632 and NFPA 274) to evaluate the flame retardation rate differed among identical materials. This means that the fundamental study is necessary to analyze the more accurate reasons.

• Wind and Structures
• /
• v.20 no.4
• /
• pp.549-564
• /
• 2015

The three-dimensional unsteady incompressible Reynolds-averaged Navier-Stokes equations and k-${\varepsilon}$ double equations turbulent model were used to investigate the effect on the measurements of anemometers due to a passing high-speed train. Sliding mesh technology in Fluent was utilized to treat the moving boundary problem. The high-speed train considered in this paper was with bogies and inter-carriage gaps. Combined with the results of the wind tunnel test in a published paper, the accuracy of the present numerical method was validated to be used for further study. In addition, the difference of slipstream between three-car and eight-car grouping models was analyzed, and a series of numerical simulations were carried out to study the influences of the anemometer heights, the train speeds, the crosswind speeds and the directions of the induced slipstream on the measurements of the anemometers. The results show that the influence factors of the train-induced slipstream are the passing head car and tail car. Using the three-car grouping model to analyze the train-induced flow is reasonable. The maxima of horizontal slipstream velocity tend to reduce as the height of the anemometer increases. With the train speed increasing, the relationship between $V_{train}$ and $V_{induced\;slipstream}$ can be expressed with linear increment. In the absence of natural wind conditions, from the head car arriving to the tail car leaving, the induced wind direction changes about $330^{\circ}$, while under the crosswind condition the wind direction fluctuates around $-90^{\circ}$. With the crosswind speed increasing, the peaks of $V_X,{\mid}V_{XY}-V_{wind}{\mid}$ of the head car and that of $V_X$ of the tail car tend to enlarge. Thus, when anemometers are installed along high-speed railways, it is important to study the effect on the measurements of anemometers due to the train-induced slipstream.

• Journal of the Korean Dietetic Association
• /
• v.1 no.1
• /
• pp.54-65
• /
• 1995

Commissary school foodservice system has been expanded rapidly in elementary foodservices in Korea. Therefore, it is essential that cost effectiveness should be assessed by comparing between alternative systems. The objectives of this study were to assess the effects on meal costs of foodservice systems and other school characteristics in terms of meal costs/day per 1 person ; to examine financial management practices and dietitians' perception concerning importance of school foodservices financial management. A total of 16 commissary schools in nationwide and 102 conventional schools at Chungnam province and Seoul were participated in this survey by mails. The results are as follows 1. Average meal costs per one person was 1,232.6 won evaluated on the standards of monthly budget basis on June, 1994. Average food costs per one person was 836.1 won(67.83%), average labor cost was 320.1 won(25.97 %) and operation costs was 76.3 won(6.2 %). 2. Average meal costs per one person did not show any significant difference between commissary and conventional foodservice schools. Meal costs of the island type and the rural type were significantly higher than those of the urban type. Meal costs of schools in Chungnam and other province were higher than schools in Seoul. The schools with less than 200 feeding numbers were higher than the schools more than 201 in meal costs per one person. 3. Food costs per one person were higher in the urban type, especially in Seoul, as the scale of feeding number increased. Labor costs and operational costs were increased in island type as well as in the schools of small feeding numbers. 4. Foodservice teachers, not dietitians were in charge of foodservice duties at the 75 % of satellites. Dietitians participated in the satellite foodservice duties were only averaged at 2.19 visits per month of 20 feeding days. 5. Items which influenced by food costs per person at the step of foodservice production were purchasing method, the perception of inventory, the distributor for foodservice, and usage of standardized recipes.