• 대한치과교정학회지
• /
• 제30권5호
• /
• pp.643-655
• /
• 2000

양악 수술에서 교합평면의 위치설정은 수술 후 새로운 위치에서의 안정성을 결정하는 중요한 요인으로써 악교정 수술환자의 진단과 치료 계획시 반드시 고려되어져야 한다. 따라서, 본 연구에서는 악교정 수술 계획시 Delaire의 구조적 구성적 방법으로 이상적인 교합평면을 설정한 경우 교합평면의 장기적인 안정성에 대해서 고찰해봄으로써 향후 악교정 수술의 진단 및 치료계획에 도움이 되고자 하였다. 본 연구에서는 골격성 제 III급 부정교합 환자 중 Delaire의 구조적 구성적 방법으로 이상적인 교합평면을 설정하여 양악수술을 시행받은 환자 25명 (남자 8명, 여자 17명, 평균 연령 $23.2{\pm}3.17$세)를 대상으로 하여, 수술후 교합평면의 안정성에 대한 평가를 시행하였다. 수술직전($T_1$)과 수술직후($T_2$, 평균 15.4일), 수술 후 최소 1년 이상 경과후($T_3$, 평균 32.6개월)을 비교함으로써 다음과 같은 결론을 얻었다. 1. 양악 수술 후 교합평면각의 유의성 있는 변화는 없었으며, 수술방법(SSRO, IVRO)에 따른 유의성 있는 변화를 보이지 않았다. 2. 술후 교합평면의 변화는 수술에 의한 악골의 이동량이나 posterior impaction의 양, 수술후 경과시간과 상관관계를 보이지 않았다. 3. 수술 후, SSRO 시행군에서는 유의하게 하악골의 전방이동이 일어났으며, IVRO 시행군에서는 하악골이 후하방 이동하면서 gonial angle과 하악평면각이 증가함으로써 하악 치아의 정출이 발생하였다.

• Journal of Animal Science and Technology
• /
• 제57권10호
• /
• pp.37.1-37.9
• /
• 2015

This study was performed to investigate the effects of the low plane of nutrition on growth and meat quality of finishing pigs. A total of 136 crossbred barrows and gilts weighing approximately 55 kg were allotted to 8 pens, with 17 animals housed per pen, in a 2 (sex) ${\times}$ 2 (nutrition) factorial arrangement of treatments. The animals allotted to a medium plane of nutrition (MPN) received a finisher phase 1 (P1) diet containing 3.47 Mcal DE/kg and 0.92 % lysine and a P2 diet containing 3.40 Mcal DE/kg and 0.78 % lysine for 35 d and 36/43 d, respectively; the animals allotted to the low plane of nutrition (LPN) received only a P2 diet containing 3.00 Mcal DE/kg and 0.68 % lysine 7 d longer than MPN. The animals were slaughtered following the feeding trial, after which the loin, ham, Boston butt, and belly were taken from a total of 24 animals, with the average live weight being 120 kg, and their physicochemical and sensory quality traits were analyzed. Average daily gain did not differ between MPN and LPN during either P1 or P2. Average daily feed intake was greater (P < 0.05) in LPN vs. MPN during both phases whereas the opposite was true for the gain:feed ratio. Backfat thickness (BFT) was less in LPN vs. MPN (21.7 vs. 24.1 mm at 115 kg). The plane of nutrition influenced no effect on any of the physicochemical characteristics of fresh loin, ham, or Boston butt analyzed in the present study. Fresh hams from LPN exhibited superior aroma and odor scores than those from MPN; however, sensory quality traits were not influenced by the plane of nutrition in other fresh primal cuts or cooked meat. Instead, fresh primal cuts and cooked meat from gilts rendered superior physicochemical characteristics and sensory scores, respectively, than those from barrows. Results suggest that the low plane of nutrition may be useful to increase the slaughter weight of finishing pigs with a moderately high BFT by virtue of its BFT-lowering effect with or without exerting a slightly positive influence on pork quality.

• Journal of Korean Neurosurgical Society
• /
• 제58권6호
• /
• pp.578-581
• /
• 2015

A rigid spino-pelvic fixation to anchor long constructs is crucial to maintain the stability of long fusion in spinal deformity surgery. Besides obtaining immediate stability and proper biomechanical strength of constructs, the S2 alar-iliac (S2AI) screws have some more advantages. Four Korean fresh-frozen human cadavers were procured. Free hand S2AI screw placement is performed using anatomic landmarks. The starting point of the S2AI screw is located at the midpoint between the S1 and S2 foramen and 2 mm medial to the lateral sacral crest. Gearshift was advanced from the desired starting point toward the sacro-iliac joint directing approximately $20^{\circ}$ angulation caudally in sagittal plane and $30^{\circ}$ angulation horizontally in the coronal plane connecting the posterior superior iliac spine (PSIS). We made a S2AI screw trajectory through the cancellous channel using the gearshift. We measured caudal angle in the sagittal plane and horizontal angle in the coronal plane. A total of eight S2AI screws were inserted in four cadavers. All screws inserted into the iliac crest were evaluated by C-arm and naked eye examination by two spine surgeons. Among 8 S2AI screws, all screws were accurately placed (100%). The average caudal angle in the sagittal plane was $17.3{\pm}5.4^{\circ}$. The average horizontal angle in the coronal plane connecting the PSIS was $32.0{\pm}1.8^{\circ}$. The placement of S2AI screws using the free hand technique without any radiographic guidance appears to an acceptable method of insertion without more radiation or time consuming.

• 항공우주기술
• /
• 제12권2호
• /
• pp.140-146
• /
• 2013

본 연구는 파라볼릭 반사기의 체적을 줄일 수 있는 프린트 리플렉터어레이 안테나 설계에 대한 연구이다. 이를 위해 시뮬레이션과 제작된 도파관 시뮬레이터 측정을 통해 리플렉트어레이 안테나 단일소자의 위상변위 특성을 확인하였다. 그 결과, 10GHz에서 시뮬레이션시 최대 $298^{\circ}$의 위상 변위를 나타내었으며, 제작 측정시 $309^{\circ}$의 평균 위상변위 특성이 나타남을 확인하였다. 또한, 프린트 리플렉트어레이 안테나 이득은 28.3dBi, 3dB 빔폭은 E-plane $5.1^{\circ}$, H-plane $5.2^{\circ}$, 부엽은 E-plane -11.4dB, H-plane -17.6dB를 나타내었다.

• 대한치과보철학회지
• /
• 제30권4호
• /
• pp.575-581
• /
• 1992

It is a very important procedure to establish the occlusal plane in the construction of complete denture. So many methods have been utilized to establish the occlusal plane in complete denture prosthodontics. However, no single method seems to fully accepted. This study was aimed to review the literature on establishing the occlusal plane in complete denture prosthodontics, to measure the distance from the lower border of the upper lip to the upper incisal edge and to investigate the correlation between the ala-tragus line and the occlusal plane. The results ware as follows ; 1. The average distance between the lower border of the upper lip and the upper incisal edge was $1.45{\pm}1.28mm$. 2. The distance between the lower border of the upper lip and the upper incisal edge had a tendency to decrease with age. 3. A angle of the ala-tragus line to the occlusal plane measured with Fox plane was $-1.41{\pm}2.33^{\circ}$. 4. The ala-tragus line to occlusal plane was nearly parallel, cosidering curve of spee in the upper natural teeth.

• 대한치과교정학회지
• /
• 제9권1호
• /
• pp.105-110
• /
• 1979

In order to define what the average Class I malocclusion looks like, 72 Class I malocclusions were compared with corresponding measurements from 90 cases of normal occlusion sample. This sample was obtained from the Department of Orthodontics, Infirmary of Seoul National University. 1. SNA, Fac(NP) to SN measurements were significantly different from the normal occlusions and smaller than the normal occlusion means. 2. 'Y' axis to SN, Mandibular plane to SN, $\underline{1}$ to Occlusal plane, $\bar{1}$ to NB(linear) measurements were significantly different from the normal occlusions and larger than the normal occlusions. 3. ANB, Occlusal plane to SN, AB to Occlusal plane, $\underline{1}$ to SN, $\bar{1}$ to SN, $\bar{1}$ to Occlusal plane measurements showed no significant difference between the means.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2002년도 하계종합학술대회 논문집(3)
• /
• pp.227-230
• /
• 2002

In this paper we concentrate on overall direction of the gaze based on a head pose for human computer interaction. To decide a gaze direction of user in a image, it is important to pick up facial feature exactly. For this, we binarize the input image and search two eyes and the mouth through the similarity of each block ( aspect ratio, size, and average gray value ) and geometric information of face at the binarized image. We create a imaginary plane on the line made by features of the real face and the pin hole of the camera to decide the head orientation. We call it the virtual facial plane. The position of a virtual facial plane is estimated through projected facial feature on the image plane. We find a gaze direction using the surface normal vector of the virtual facial plane. This study using popular PC camera will contribute practical usage of gaze tracking technology.

• 제어로봇시스템학회논문지
• /
• 제17권5호
• /
• pp.419-428
• /
• 2011

This paper suggests a judgement method for an inclined plane before entrance of it and the detection of obstacle position. Main idea is started from the assumption that obstacle is always on the bottom plane, and corner appears at this position. The process to detect the obstacle consists of three steps. First the 3D data using stereo matching is acquired to detect an obstacle. Second a bottom plane is extracted by using limit condition. Last the obstacle position is found by using Harris corner detection. Obstacle position detection on an inclined plane was verified by outdoor and indoor experiment. In error analysis, it is confirmed that an average error of obstacle detection in outdoor was larger than the error in indoor but the error are within about 0.030 m. This method will be applied to unmanned vehicles to navigate under various environment.

• 대한치과교정학회지
• /
• 제28권2호
• /
• pp.237-253
• /
• 1998

골격성 제 III급 부정교합 환자에서 성장조절이나 절충치료로 해결하기 어려운 경우 악교정 수술을 시행하게 되며, 이러한 환자의 대부분이 최대의 효과를 얻기 위해 상하악 동시 수술이 필요하다. 이러한 양악 수술에서, 교합평면의 설정은 진단 및 치료에 매우 중요한 기준이 되어지며, 바람직한 기능 및 심미적인 결과와 술후 안정성을 얻을수 있도록 계획되어져야 한다. 본 연구에서는 양악 수술을 시행받은 골격성 제 III급 부정교합 환자 48명 (남자25명 여자23명, 평균 연령 21.5세)을 대상으로 하여 교합평면의 설정에 사용되어지는 몇가지 진단 기준중, 많이 사용되어지고 있는 Delaire의 구조적, 구성적 분석에 의한 각 개인의 이상적인 교합평면의 술후 안정성에 대해서 평가하고자 이상적인 교합평면에 부합되게 수술이 시행된 군(A군-24명)과 이 평면에서 벗어난 군(B군-24명)으로 나누어, 수술 직전($T_1$)과 수술 직후($T_2$-평균 4.3일), 수술 8개월 이상 경과 후($T_3$-평균 1년 3개월)에 두군의 측모 두부 방사선 사진을 비교하여 다음과 같은 결론을 내렸다. 1. 양악 수술 후 $T_2와\;T_3$시기의 유의차를 보인 값은 교합평면과 하악평면이 이루는 각 이었으며 그외의 교합평면의 경사도에선 유의성 있는 차이를 보이지 않았다. 즉 교합평면의 술후 재발량은 SN평면과, FH평면에 대해서 각각 $0.24^{\circ}{\pm}2.43{\circ},\;0.15{\circ}{\pm}2.16{\circ}$로 양악 수술 후 교합평면의 안정성은 유지되었다. 2. A군과 B군사이에서 교합평면의 안정성에는 유의성 있는 차이가 없었다. 3. A군및 B군내에서 교합평면의 안정성은 술자 및 수술방법에 따라 유의성 있는 차이를 보이지 않았다. 4.술후 교합평면의 변화($T_3-T_2$)는 술후의 치아에 의한 변화 보다는 악골의 변화($T_3-T_2$)와 높은 순상관관계를 보였으며 특히 하악골의 변화와 높은 순상관관계를 보였다. 5. 술후 교합평면의 변화($T_3-T_2$)는 수술에 의한 상악골의 impaction양, 하악골의 후퇴량($T_2-T_1$)과는 상관관계를 보이지 않았다.

• Geomechanics and Engineering
• /
• 제30권1호
• /
• pp.67-73
• /
• 2022

In this study, the fiber orientation distribution (FOD) is investigated using both micro-CT (computerized tomography) and image analysis of physically cut specimens prepared from Polyvinyl Alcohol (PVA) fiber reinforced cemented Toyoura sand. The micro-CT images of the fiber reinforced cemented sand specimens were visualized in horizontal and vertical sections. Scans were obtained using a frame rate of two frames and an exposure time of 500 milliseconds. The number of images was set to optimize and typically resulted in approximately 3000 images. Then, the angles of the fibers for horizontal sections and in vertical section were calculated using the VGStudio MAX software. The number of fibers intersecting horizontal and vertical sections are counted using these images. A similar approach was used for physically cut specimens. The variation of results of fiber orientation between micro-CT scans and visual count were approximately 4-8%. The micro-CT scans were able to precisely investigate the fiber orientation distribution of fibers in these samples. The results show that 85-90% of the PVA fibers are oriented between ±30° of horizontal, and approximately 95% of fibers have an orientation that lies within ±45° of the horizontal plane. Finally, a comparison of experimental results with the generalized fiber orientation distribution function 𝜌(θ) is presented for isotropic and anisotropic distribution in fiber reinforced cemented Toyoura sand specimens. Experimentally, it can be seen that the average ratio of the number of fibers intersecting the finite area on a vertical plane to number of fibers intersecting the finite area on a horizontal plane (N^V_tot/N^H_tot) cut through a sample varies from 2.08 to 2.12 (an average ratio of 2.10 is obtained in this study). Based up on the analytical predictions, it can be seen that the average N^V_tot/N^H_tot ratio varies from 2.13 to 2.17 for varying n values (an average ratio of 2.15).