• Archives of Plastic Surgery
• /
• 제32권3호
• /
• pp.281-286
• /
• 2005

The goal in facial paralysis treatment is to achieve the normal appearance of the face as well as to reconstruct the natural symmetrical smile. In cases of facial paralysis, a widely accepted procedure is the two stage method, which combines neurovascular free muscle transfer with cross face nerve grafting. Although the results are promising, the two operations of this method, which are about 1 year apart, impose an economic burden on the patients and require a lengthy period before results are obtained. In order to overcome these drawbacks, one stage method, using latissimus dorsi neurovascuular free muscle flap was introduced. Between January 2000 and January 2004, fifteen patients with long standing facial paralysis were treated in the Korea University Anam Hospital. The segmental latissimus dorsi with long nerve and pedicle was transferred to the paralyzed side of the face. The first postoperative movement of the transferred muscle was reported at 8.9 months, faster than that of the two stage method. During the next 24 months, a constant increase in the power of muscle contraction was observed. The fifteen cases were evaluated within an average of 31.7 months following the surgery and satisfactory results including muscle contraction were obtained in eleven of the cases but muscle contraction was not found in three cases.

• 대한치과기공학회지
• /
• 제11권1호
• /
• pp.95-102
• /
• 1989

This study was performed to study the efficiency of a local ventilation system, installed in dental laboratories, and of two types of protecting face masks. The dust originating from the workpiece as well as from the wheels and stones was collected on air filters in the cutting cycle during coarse and fine grinding, and in the subsequent polishing procedures of each specific dental material. The efficiency of the ventilation system was measured on the basis of weight reduction of dust in the breathing air at a distance about 20-40 cm from workpiece. The results were as follows: 1. Use of the local ventilation system reduced the amounts of respirable dust to an average level of 21.4%, although the efficiency of the local ventilation system varied depending upon materials used. 2. Mounting a nozzle on the tube improved the efficiency of the ventilation system considerably. The efficiency of the local ventilation system also increased as the workpiece was closing to the tube inlet. 3. With or without the local ventilation system, the distance between the position of the workpiece and sampler greatly affected the dust level. 4. The face masks covering the sampler improved the efficiency of the ventilation system considerably.

• 대한융합한의학회지
• /
• 제6권1호
• /
• pp.37-42
• /
• 2024

Objectives: This study aims to evaluate the clinical validity of the system by conducting a clinical study to assess the diagnostic agreement between the system and Korean medical doctors. Methods: This study was conducted from September 7, 2023, to December 7, 2023, across five Korean medicine institutions, involving 100 adult participants aged 20-64 who consented to participate. Participants first entered their symptoms into a web-based program, which utilized an AI-based algorithm to diagnose 36 types of pattern differentiation. Subsequently, Korean medical doctors conducted face-to-face diagnoses using the same 36 types. The diagnostic agreement between the system and the doctors' diagnoses was analyzed using descriptive statistical analysis, and the results were expressed as a percentage agreement. Results: Analysis of the diagnostic data from 100 participants revealed that the web-based diagnosis support system identified an average of 7.76±0.79 patterns per patient, while Korean medical doctors identified an average of 7.99±0.10 patterns per patient. The diagnostic agreement between the system and the doctors showed an average of 7.08±1.08 patterns per patient, with an overall diagnostic agreement rate of 88.57±13.31%. Conclusion: This study developed a web-based diagnosis support system for traditional Korean medicine and evaluated its clinical validity by assessing diagnostic agreement. Comparing the diagnoses of the system with those of Korean medical doctors for 100 patients, the system showed an approximately 89% agreement rate with the clinical diagnoses. The system holds potential for aiding Korean medical doctors in pattern differentiation diagnosis in clinical practice.

• Asian Journal of Innovation and Policy
• /
• 제5권1호
• /
• pp.35-54
• /
• 2016

This study starts from the perspective that preparing students for employment is the most important role of undergraduate degree programs. Therefore, we examine the determinants of undergraduate employment, especially highlighting the differences by disciplines. We classify 28 factors into five categories such as personal attributes, entrance attributes, students’ employment-related activities, regular curriculum and employability programs provided by universities. This study is based on data from 7,616 students from a Korean university over four and half years. Findings reveal that university efforts are crucial in engineering. Only exchange programs and employment programs have an impact on science. There are no specific factors in humanities and social science. Grade point average and students’ efforts are important in business. Face-to-face coaching in employability support programs is effective for securing employment except in science disciplines. The study results do not point to the absence of a role of university even in the low employment disciplines. Rather, the issue is that of an over-supply of graduates exceeding job offers that results from the worldwide expansion of higher education services.

• Journal of the Korean Wood Science and Technology
• /
• 제19권3호
• /
• pp.53-61
• /
• 1991

Mechanical properties of composite panel made with 3mm thick Apitong(Dipterocarpus grandiflorus) veneer on each face of particleboard core of 4 different specific gravity were determined. The results obtained were as follows: 1. Measured MOR and MOE increased with an increased in specific gravity of particleboard core. 2. Test results showed that the difference in bending properties between flatwise bending and edgewise bending was present. The average MOE value of flatwise loading was higer than that of epdgewise loading. But it was shown reverse tendency in MoR and MOE. 3. The delamination between face veneer and core particle was found in flatwise bending but nell in edgewise. 4. These composite panel could be substituted for plywood and other panel materials in furniture making as considered suitable allowable stress and bending strength.

• 전자공학회논문지C
• /
• 제34C권10호
• /
• pp.43-50
• /
• 1997

In this paper, we present a method that can recognize face images by use of a sparse population code that is a learning model about a receptive fields of the simple cells in the primary visual cortex. Twenty front-view facial images form twenty persons were used for the training process, and 200 varied facial images, 20 per person, were used for test. The correct recognition rate was 100% for only the front-view test facial images, which include the images either with spectacles or of various expressions, while it was 90% in average for the total input images that include rotated faces. We analyzed the effect of nonlinear functon that determine the sparseness, and compared recognition rate using the sparese population code with that using eigenvectors (eigenfaces), which is compact code that makes contrast with the sparse population code.

• 식품기술
• /
• 제18권1호
• /
• pp.91-98
• /
• 2005

Aims: As a preliminary experiment on new sanitizer delivery tools, the efficacy of aerosolizedsanitizer on foodborne pathogens was investigated in larger model chamber system.Methods: Peroxyacetic acid and hydrogen peroxide were aerosolized in a model system againstartificially inoculated target microorganisms on laboratory media. Cultures of 4 different foodborne pathogens were inoculated and affixed onto 3 different heights (bottom, wall, and ceiling), and 3different orientations (face-down, vertical, and face-down) inside a commercial semi-trailer cabinet(14.6 x 2.6 x 2.8 m). Sanitizer was aerosolized into 2 m droplet size fog and treated for 1 h atambient temperature.Results: Populations of Bacillus cereus, Listeria innocua, Staphylococcus aureus, and Salmonellatyphimurium were reduced by an average of 3.09, 7.69, 6.93 and 8.18 log units per plate, respectively.Interestingly, L. innocua, Staph. aureus, and Salm. typhimurium showed statistically not different (P$\leq$ 0.05) reduction patterns relative to height and orientation that were never expected in a sprayingsystemConclusion and significance: Aerosolized sanitizers diffuse like gaseous sanitizers, so it has greatpotential for use in commercial applications.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2002년도 하계종합학술대회 논문집(3)
• /
• pp.227-230
• /
• 2002

In this paper we concentrate on overall direction of the gaze based on a head pose for human computer interaction. To decide a gaze direction of user in a image, it is important to pick up facial feature exactly. For this, we binarize the input image and search two eyes and the mouth through the similarity of each block ( aspect ratio, size, and average gray value ) and geometric information of face at the binarized image. We create a imaginary plane on the line made by features of the real face and the pin hole of the camera to decide the head orientation. We call it the virtual facial plane. The position of a virtual facial plane is estimated through projected facial feature on the image plane. We find a gaze direction using the surface normal vector of the virtual facial plane. This study using popular PC camera will contribute practical usage of gaze tracking technology.

• 한국공작기계학회논문집
• /
• 제17권5호
• /
• pp.116-122
• /
• 2008

In order to establish automation or optimization of the machining process, predictions of the forces in machining are often needed. A new model fur farces in milling with the experimental model based on the specific cutting pressure and the Oxley's predictive machining theory has been developed and is presented in this paper. The specific cutting pressure is calculated according to the definition of the 3 dimensional cutting forces suggested by Oxley and some preliminary milling experiments. Using the model, the average cutting forces and force variation against cutter rotation in milling can be predicted. Milling experimental tests are conducted to verify the model and the predictive results agree well with the experimental results.

• 한국분말재료학회지
• /
• 제11권3호
• /
• pp.242-246
• /
• 2004

FePt nanoparticles for high-density magnetic recording media were synthesized by the simultaneous chemical reduction of Fe(acac) $_2$ and Pt(acac) $_2$ with 1,2-hexadecanediol as the reducing reagent. TEM images showed that the shape of as-synthesized FePt nanoparticle was spherical and average particle size was 3 nm. Also, SAD pattern showed that crystal structure was disordered FCC (face centered cubic). These FCC structured nanoparticles were transformed FCT (face centered tetragonal) structure by annealing at 55$0^{\circ}C$ for 30 min in Ar atmosphere. XRD analysis revealed that as-synthesized FePt nanoparticles were transformed from disordered FCC to ordered FCT. Finally, the coercivity of 2 kOe for FePt nanoparticles with FCT structure was obtained by VSM measurement.