• 한국토양비료학회지
• /
• 제48권5호
• /
• pp.436-441
• /
• 2015

The chemical properties of paddy fields in Gyeonggi province were monitored every 4 years from 1999 to 2015 in order to provide basic information for soil fertility management of paddy fields. In 2015, the soil chemical properties of paddy fields were 5.9 in pH, $23g\;kg^{-1}$ in organic matter (OM), and $84mg\;kg^{-1}$ in available phosphate (Avail. $P_2O_5$). Exchangeable (Exch.) potassium (K), calcium (Ca) and magnesium (Mg) were 0.30, 5.1 and $1.3cmol_ckg^{-1}$, respectively, and available silicate (Avail. $SiO_2$) was $129mg\;kg^{-1}$. In the long-term analysis, the contents of Avail. $SiO_2$, Exch. Ca and pH of paddy soils showed increasing tendency. However, Avail. $P_2O_5$ and Exch. K tended to decrease, and there were no significant changes in the contents of OM and Exch. Mg. Paddy soil within appropriate pH range increased from 44% in 1999 to 76% in 2003, 84% in 2007, 63% in 2011, and 80% in 2015. But soil within appropriate range of Exch. Ca tended to decrease, showing 36% in 1999, 42% in 2003, 38% in 2007, 37% in 2011 and 32% in 2015. In case of Avail. $SiO_2$, soil within appropriate range increased from 14% in 1999 to 17% in 2003, 18% in 2007, 16% in 2011, and 31% in 2015. As a result, paddy fields with less in nutrient level need to be more fertilized based on soil analysis. And the application of silicate fertilizer is strongly recommended to those of paddy fields in need. Also soil management such as the cultivation of green manure crop or application of rice straw will be necessary to increase the organic matter content of paddy soil.

• 한국세라믹학회지
• /
• 제39권10호
• /
• pp.948-954
• /
• 2002

차세대 발전 시스템에서 사용되는 고온 가스 필터용 지지층 소재를 제조하기 위하여 용융 Si 침윤 방법으로 기공율이 32∼36%, 주기공 크기가 37∼90 ${\mu}m$ 범위를 갖는 고강도 다공질 반응소결 탄화규소(RBSC)를 개발하였다. 반응소결 탄화규소 다공체의, 최대 파괴강도는 120MPa이었으며, 용융 Si 침윤 방법으로 제조된 반응소결 탄화규소 다공체에서는 SiC 입자 사이에 SiC/Si로 이루어진 기지상이 형성되어 있기 때문에 파괴 강도 및 열충격 특성이 점토 결합 탄화규소 다공체 보다 우수하였다. 반응소결 탄화규소 다공체의 기공율 및 기공 크기는 잔류 Si의 양 및 성형체에 사용한 SiC 입자 크기에 따라 다르게 나타났다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1988년도 전기.전자공학 학술대회 논문집
• /
• pp.367-369
• /
• 1988

We suggest a new annealing method for stabilization of $Si-SiO_2$ interface state in MOS device using $NH_3$(10%) + $N_2$(90%) ambient gases. The annealing effect was examined through C-V characteristics, threshold voltage, effective mobility on channel, respectively. The experimental result show that the new method is available to improvement of MOS device characteristics.

• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 1999년도 제29회 춘계학술대회
• /
• pp.119-126
• /
• 1999

The rolling fatigue lives (RFL) of five kinds of silicon nitride balls were investigated. Four kinds of Si$_3$N$_4$ balls were fabricated using different raw materials, sintering aids and sintering conditions, Commercially available Si3N4 ball was also studied for comparison. All the balls were finished up to the dimensional accuracy of Grade 10 defined in KS B 2001 (Steel Balls for Ball Bearings) with a size of 9.525mm. RFL tests were then conducted under the initial theoretical maximum contact stress 6.38 GPa and the spindle speed 10,000 rpm. Gear oil was provided by oiled race as lubricant. The results of RFL test indicated the prerequisitic conditions for the long rolling life of Si$_3$N$_4$ball : (1) the high density, (2) mjcrostructures consisted of small uniformly distributed grains, (3) little glassy phase in grainboundary, and (4) little crystalline phase and secondary phase that induces residual thermal stress due to the differences of thermal expansion coefficient with Si$_3$N$_4$Phase.

• 한국결정성장학회지
• /
• 제9권2호
• /
• pp.240-244
• /
• 1999

화학기상증착법(CVD)을 사용하여 graphite 기판 위에 단층의 SiC와 SiC/C 경사기능층을 증착시켰다. 먼저 상업적인 전산 구조 해석 프로그램을 사용하여 열충격하에 있는 재료층 내부의 온도 분포 및 열응력 분포를 계산하였고, 계산에 의해 설계, 제작된 경사기능층 시편들의 열특성을 조사하였다. 열충격 시험결과, 경사기능층 시편들이 계면에서 매우 효율적인 열응력 이완특성을 나타내는 것을 알 수 있었고, $\Delta$T=1600K의 열충격에도 변형이 없음을 알 수 있었다.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2004년도 Asia Display / IMID 04
• /
• pp.676-678
• /
• 2004

In order to develop new yellow phosphor that emit efficiently under the 450 - 470 nm excitation range, we have synthesized a $Eu^{2+}$-activated $Sr_3SiO_5$ yellow phosphor and investigated an attempt to develop white LEDs by combining it with a InGaN blue LED chip (460 nm). Two distinct emission bands from the InGaN-based LED and the $Sr_3SiO_5$:Eu phosphor are clearly observed at 460 nm and at 570 nm, respectively. These two emission bands combine to give a spectrum that appears white to the naked eye. Our results showed that InGaN (460 nm chip)-based $Sr_3SiO_5$:Eu exhibits a better luminous efficiency than that of the industrially available product InGaN (460 nm chip)-based YAG:Ce.

• 대한화학회지
• /
• 제56권4호
• /
• pp.478-483
• /
• 2012

We successfully synthesized $Fe_3O_4/SiO_2$ nanoparticles with ultrathin silica layer of $1.0{\pm}0.5$ nm that was fine controlled by changing concentration of $Fe_3O_4$. Among various reaction conditions for silica coating, increasing concentration of $Fe_3O_4$ was more effective approach to decrease silica thickness compared to water-to-surfactant ratio control. Moreover, we found that concentration of the 1-octanol is also important factor to produce the homogeneous $Fe_3O_4/SiO_2$ nanoparticles. The present approach could be available to apply on preparation of other core/shell nanoparticles with ultrathin silica layer.

• Tribology and Lubricants
• /
• 제15권2호
• /
• pp.150-155
• /
• 1999

The rolling fatigue lives (RFL) of five kinds of silicon nitride balls were investigated. Four kinds of Si$_3$N$_4$balls were fabricated using different raw materials, sintering aids and sintering conditions. Commercially available Si$_3$N$_4$ball was also studied for comparison. All the balls were finished up to the dimensional accuracy of Grade 10 defined in KS B 2001 (Steel Balls fer Ball Bearings) with a size of 9.525 mm. RFL tests were then conducted under the initial theoretical maximum contact stress 6.38 GPa and the spindle speed 10,000 rpm. Gear oil was provided by oiled race as lubricant. The results of RFL test indicated the prerequisitic conditions for the long rolling life of Si$_3$N$_4$ball : (1) the high density, (2) microstructures consisted of small uniformly distributed grains, (3) little glassy phase in grainboundary, and (4) little crystalline phase and secondary phase that induces residual thermal stress due to the differences of thermal expansion coefficient with Si$_3$N$_4$phase.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2009년도 9th International Meeting on Information Display
• /
• pp.243-245
• /
• 2009

The single phase $Ba_2SiS_4$ doped with $Eu^{2+}$ was successfully synthesized by direct sulfurization of an oxide precursor prepared by a spray drying method using a novel water soluble silicon compound, which remains soluble in a given aqueous solution. The intensity of the emission peak of thus obtained $Ba_2SiS_4:Eu^{2+}$ was 1.75 times larger than that of a sample prepared by a solid state reaction method, and it approached 106% compared to one of the best commercially available YAG:$Ce^{3+}$ phosphor.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2009년도 9th International Meeting on Information Display
• /
• pp.1274-1275
• /
• 2009

We report on preparation of $CaBaSiS_4:Eu^{2+}$ material by an advanced chemical solution method and fluorescent properties of the new material. The emission spectrum of $CaBaSiS_4:Eu^{2+}$ has the main peak centered at 598 nm, with the corresponding excitation maximum at around 420 nm. The strongest emission intensity of this material approached 96% compared to one of the best commercially available YAG:$Ce^{3+}$ phosphor.