• 대한기계학회논문집A
• /
• 제38권9호
• /
• pp.1029-1036
• /
• 2014

3D 스캐닝을 이용한 3D 형상정보를 구축하기 위해서는 피측정물의 촬영부터 시작하여 획득된 데이터의 합성과정까지 여러 단계를 거치는데, 이는 많은 시간과 복잡하며 번거로운 수작업을 요구한다. 본 연구에서는 복잡하고 많은 시간이 소요되는 과정에서 생기는 불필요한 준비과정이나 진행단계별 수작업 요소들을 자동화하여 작업자의 숙련도에 따라 발생하는 데이터 품질의 차이를 최소화 할 수 있도록 하였으며, 작업자의 실수로 인해 발생하는 데이터의 부재를 사전에 예방 할 수 있어 결과적으로 3D 스캐너를 통한 3 차원데이터 획득과정의 시간적, 데이터적 효율성과 형상정밀도를 증가시킴을 증명하였다.

• Journal of Biosystems Engineering
• /
• 제41권2호
• /
• pp.75-84
• /
• 2016

Purpose: In-situ water quality monitoring based on ion-selective electrodes (ISEs) is a promising technique because ISEs can be used directly in the medium to be tested, have a compact size, and are inexpensive. However, signal drift can be a major concern with on-line management systems because continuous immersion of the ISEs in water causes electrode degradation, affecting the stability, repeatability, and selectivity over time. In this study, a computer-based nitrate monitoring system including automatic electrode rinsing and calibration was developed to measure the nitrate concentration in water samples in real-time. Methods: The capabilities of two different types of poly(vinyl chloride) membrane-based ISEs, an electrode with a liquid filling and a carbon paste-based solid state electrode, were used in the monitoring system and evaluated on their sensitivities, selectivities, and durabilities. A feasibility test for the continuous detection of nitrate ions in water using the developed system was conducted using water samples obtained from various water sources. Results: Both prepared ISEs were capable of detecting low concentrations of nitrate in solution, i.e., 0.7 mg/L $NO_3-N$. Furthermore, the electrodes have the same order of selectivity for nitrate: $NO_3{^-}{\gg}HCO_3{^-}$ > $Cl^-$ > $H_2PO_4{^-}$ > $SO{_4}^{2-}$, and maintain their sensitivity by > 40 mV/decade over a period of 90 days. Conclusions: The use of an automated ISE-based nitrate measurement system that includes automatic electrode rinsing and two-point normalization proved to be feasible in measuring $NO_3-N$ in water samples obtained from different water sources. A one-to-one relationship between the levels of $NO_3-N$ measured with the ISEs and standard analytical instruments was obtained.

• 한국정보과학회논문지:소프트웨어및응용
• /
• 제32권7호
• /
• pp.625-635
• /
• 2005

본 논문에서는 흥부 CT 영상에서 폐 부위를 효율적으로 자동 분할하기 위한 하이브리드 접근기법을 제안한다. 본 제안방법은 다음과 같은 세 단계로 구성된다 첫 번째, 2, 3차원 자동 씨앗 영역성장법과 저해상도 연결요소 레이블링을 통하여 폐와 기관지를 분할한다. 두 번째, 2차원 형태학적 연산을 반복 적용하여 폐와 기관지를 분리한 후 저해상도 연결요소 레이블링을 이용하여 폐만 분할한다. 세 번째, 영상차감 기법을 사용한 폐 영역 보정을 통해 보다 정확한 폐 영역을 얻는다. 실험에서는 5명의 환자로부터 얻은 10개의 흉부 CT 영상을 사용하여 제안방법의 정확성과 효율성을 평가한다. 제안한 자동 분할 기법의 적용 결과를 전문가에 의한 수동 분할 결과와 비교함으로써 정확성을 평가하고, 수행시간과 메모리 사용량을 분석하여 제안방법의 효율성을 평가한다. 제안한 저해상도 연결요소 레이블링을 사용했을 때 수행시간은 평균 31.4초, 최대 메모리 사용량은 평균 196.75MB가 단축된다. 본 제안방법은 혈관에 생기는 빈 공간을 막아주는 추가작업 없이 효율적으로 자동 폐 분할을 수행한다.

• 품질경영학회지
• /
• 제29권3호
• /
• pp.66-78
• /
• 2001

This paper deals with problem of determining process target value under automated visual inspection(AVI) system. Three independent error sources - digitizing error, illumination error, and positional error - which have a close relationship with the performance of the AVI system, are considered. Assuming that digitizing error is uniformly or normally distributed and illumination and positional errors are normally distributed, respectively, the distribution function for the error of measured lengths is derived when the length of a product is measured by the AVI system. Then, Optimal target values under two error models of AVI system are obtained by minimizing the total expected cost function which consists of give away, rework and penalty cost. To validate two process setting models, AVI system for drinks filling process is made up and test results are discussed.

• 한국기계가공학회지
• /
• 제9권6호
• /
• pp.21-28
• /
• 2010

This study shows an optimization procedure for an automatic determination on the gate position to ensure the fill-uniformity within a part cavity by using the injection molding simulation. For an optimization, the maximum pressure-difference within a part cavity induced at the stage of filling is used to evaluate degree of fill-uniformity. In addition, a direct search scheme based on the reduction of design space is developed and applied in the optimization problem. This corresponding proposed methodology was applied in the optimization on the gate location for a CD-tray molding, as a result, showed the improvement of the fill-uniformity within the cavity.

• 대한의용생체공학회:의공학회지
• /
• 제12권2호
• /
• pp.89-98
• /
• 1991

This study is concerned on the automation for cell diagnosis which has better objectivity and speed of test than human beings. Diagnosis is on the basis of shape change of abnormal Cells. Used parameters are nucleus area, nucleus perimeter, nucleus shape, cytoplasm area, nucleus/cytoplsm ratio, which was obtained using image processing technics. A new mode method is proposed on the automatic threshold selection for superior process time compared with Otsu's. Contour of the cytoplasm of abnormal cell is obtained using me- dian filter and sorel operator. The mask to get only original shape of abnormal cells is formed uslng the contour filling algorithm. In the result the normal cells are separated from the abnormal cells and the abnormal cells can be distinguished through screwing of abnormal cell's image with reference data to judge abnormal cells. Owing to this study the number of inspections which the pathologists should examine will be decreased and the time for inspection will be shortened.

• 한국지반공학회논문집
• /
• 제16권4호
• /
• pp.149-156
• /
• 2000

해성점토를 이용하여 준설매립한 부지의 장기적인 침하거동을 규명하기 위하여 실린더와 대형토조를 이용하여 침강.자중압밀시험을 수행하였으며, 준설매립단지에 자동무선계측시스템을 설치하여 매립부지의 층별침하량과 간극수압의 변화를 계측하였다. 이를 이용하여 준설매립 공정에 따른 매립지층의 침하거동을 분석하고 유한변형률 압밀이론을 이용한 수치해석 결과와 비교하였다. 침하거동 분석결과, 불연속 준설매립공정으로 인하여 매립지층의 분리 현상이 발생하였고 지층별 침하거동이 상이하게 나타났다.

• Korean Journal of Mathematics
• /
• 제19권4호
• /
• pp.453-464
• /
• 2011

We used SAS program in statistics class as a plan to increase effect of class. Because lease cost of SAS program is high and low-level students felt difficulty of the syntax of SAS program, I planned to introduce other instruction-software. We observe whether it's O.K. to use Excel instead of SAS program and Excel is helpful in having positive attitudes. We try to compare and analyze the merits of two programs. The purpose of this study is to apply Excel to statistics class, cut down the cost of instruction-software, and make students understand statistics more conveniently and easily.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 1992년도 가을 학술발표회 논문집
• /
• pp.112-120
• /
• 1992

The use of Pre-processor for building structural analysis used to rely upon filling up fixed format data, which was ineffective and error-prone. This research attempts to integrate structural analysis system with DBMS and CAD system in order to make it easy to exchange data between pre-process, analysis, and post-process stages. Automatic generation of database from pre-process stage allows easy preparation of main input data for other structural analysis programs. CAD system with some sub-programs written in LISP and C works as a graphic user interface. This approach gives an easy, effective and error-free way of inputing data for structural analysis.

• 산업경영시스템학회지
• /
• 제21권45호
• /
• pp.201-213
• /
• 1998

We address the problem of choosing the most economic mean value for an automatic filling operation on a production line through the sampling inspection. If quality characteristic of a unit is less than inspection specification then the goods is not accepted. Otherwise, it is accepted. The lots that the numbers of non-conforming units in a sample are larger than the allowable number of non-conforming units are rejected. The non-conforming units in the rejected lots are separated by the screening inspection. The non-conforming units separated are sold in discount price. We assume that quality characteristic is larger-the-better characteristic, the distribution of quality characteristic is normal distribution, and the standard deviation of the distribution is known. This paper presents total expected profit function model considering sales revenue, inspection costs, and material costs. The manufacturing process mean value maximizing total expected profit is determined, and the results of the process target value and total expected profit is analyzed as coefficients change.