• Journal of Mechanical Science and Technology
• /
• v.18 no.11
• /
• pp.1923-1931
• /
• 2004

Manufacturing of complex surface plates in stern and stem is a major factor in cost of a preliminary ship design by computing process. If these hull plate parts are effectively classified, it helps to compute the processing cost and find the way to cut-down the processing cost. This paper presents a new method to classify surface plates effectively in the preliminary ship design using neural network. A neural-network-based ship hull plate classification program was developed and tested for the automatic classification of ship design. The input variables are regarded as Gaussian curvature distributions on the plate. Various applicable rules of network topology are applied in the ship design. In automation of hull plate classification, two different numbers of input variables are used. By observing the results of the proposed method, the effectiveness of the proposed method is discussed. As a result, high prediction rate was achieved in the ship design. Accordingly, to the initial design stage, the ship hull plate classification program can be used to predict the ship production cost. And the proposed method will contribute to reduce the production cost of ship.

• International Journal of Aeronautical and Space Sciences
• /
• v.18 no.4
• /
• pp.688-696
• /
• 2017

This paper presents an integrated roll-pitch-yaw autopilot using an equivalent based sliding mode control for skid-to-turn nonlinear time-varying missile system with lumped disturbances in its six-equations of motion. The considered missile model are developed to integrate the model uncertainties, external disturbances, and parameters perturbation as lumped disturbances. Moreover, it considers the coupling effect between channels, the variation of missile velocity and parameters, and the aerodynamics nonlinearity. The presented approach is employed to achieve a good tracking performance with robustness in all missile channels simultaneously during the entire flight envelope without demand of accurate modeling or output derivative to avoid the noise existence in the real missile system. The proposed autopilot consisting of a two-loop structure, controls pitch and yaw accelerations, and stabilizes the roll angle simultaneously. The Closed loop stability is studied. Numerical simulation is provided to evaluate performance of the suggested autopilot and to compare it with an existing autopilot in the literature concerning the robustness against the lumped disturbances, and the aforesaid considerations. Finally, the proposed autopilot is integrated in a six degree of freedom flight simulation model to evaluate it with several target scenarios, and the results are shown.

• The Transactions of the Korea Information Processing Society
• /
• v.6 no.4
• /
• pp.833-841
• /
• 1999

The texts constructed with Optical Character Recognition(OCR) contain more errors than those constructed with keyboard typing. Therefore, in order to retrieve useful information from OCR texts, we need to develop an effective automatic indexing method. In this paer, we investigate automatic indexing methods that can retrieve information effectively from Korean OCR text database with the character-level recognition ratio of 90%. Experimental result shows that 2-gram indexing provides similar retrieval effectiveness of morpheme-based indexing for the Korean OCR text database.

• The Transactions of the Korea Information Processing Society
• /
• v.7 no.11
• /
• pp.3427-3437
• /
• 2000

In this paper,we propose an method of core sciences extractionusing word cooccrrence graph in order to summarize a document. For automatic extraction of core sentenees, we construct a mean cluster from word cooccurrence graph, and find insistence which corresponds a porposed of author. And then we extract keywords by using relationship between mean cluster and isistence. Finally, core senrences are sclected based on keywords and insitances. The esults are evaluated by comparing with manual extraction, and show that the extraction performance is improved about 10%.

• Transactions of Materials Processing
• /
• v.27 no.5
• /
• pp.296-300
• /
• 2018

T-type and H-type section steels were generally used in shipbuilding and offshore plants and were produced by welding technology. These section steels were produced by handwork, and the supplying amounts can't satisfy the demand amounts of the fabrication companies. In case of fillet welding, there are some gaps in weld-joint region due to no groove preparation processing and it can occur crack initiation in the welded region. It is important to evaluate the microstructural and mechanical properties of welded zone to solve these problems. To satisfy the demand amounts of T-bar parts, automatic welding technology was introduced and several conditions as a function of welding speeds were carried out to improve the manufacturing speed. Heat-affected zone may be affected by variation of heat input and cooling rate through automatic welding speed and welding speed is necessary to be optimized. In this study, fusion zone and heat-affected zone were investigated by microstructural and mechanical analysis and were evaluated whether the welded parts were sound or not.

• Journal of the Korea Society of Computer and Information
• /
• v.11 no.6 s.44
• /
• pp.1-8
• /
• 2006

Many researchers have been studied for the automatic chromosome karyotype classification and analysis. For the automatic classify the each chromosome which is the image in microscope, it is necessary to process the sub-procedure, ie. image pre-processing, implementing karyotype classifier. The image pre-processing proceeded the each chromosome separation, the noise exception and the feature parameter extraction. The extracted morphological feature parameter were the centromeric index(C.I.), the relative length ratio(R.L.), and the relative area ratio(R.A.). In this paper, the fuzzy classifier was implemented for the human chromosome karyotype classification. The extracted morphological feature parameter were used in the input parameter of fuzzy classifier. We studied about the selection of the membership function for the optimal fuzzy classifier in each chromosome groups.

• 한국HCI학회:학술대회논문집
• /
• 2007.02a
• /
• pp.268-273
• /
• 2007

In this paper, we present effective methods for automatic music recommendation system which automatically recommend music by signal processing technology. Conventional music recommendation system use users’ music downloading pattern, but the method does not consider acoustic characteristics of music. Sometimes, similarities between music are used to find similar music for recommendation in some method. However, the feature used for calculating similarities is not highly related to music characteristics at the system. Thus, our proposed method use high-level music characteristics such as rhythm pattern, timbre characteristics, and the lyrics. In addition, our proposed method store features of music, which individuals queried, to recommend music based on individual taste. Experiments show the proposed method find similar music more effectively than a conventional method. The experimental results also show that the proposed method could be used for real-time application since the processing time for calculating similarities between music, and recommending music are fast enough to be applicable for commercial purpose.

• Journal of Institute of Control, Robotics and Systems
• /
• v.3 no.5
• /
• pp.497-502
• /
• 1997

In this study an automatic rolling-coil labeling system using robot vision system and peripheral mechanism is proposed and implemented, which instead of the manual labor to attach labels Rolling-coils in a steel mill. The binary image process for the image processing is performed with the threshold, and the contour line is converted to the binary gradient which detects the discontinuous variation of brightness of rolling-coils. The moments invariant algorithm proposed by Hu is used to make it easy to recognize even when the position of the center are different from the trained data. The position error compensation algorithm of six degrees of freedom industrial robot manipulator is also developed and the data of the position of the center rolling-coils, which is obtained by floor mount camera, are transferred by asynchronous communication method. Therefore, even if the position of center is changed, robot moves to the position of center and performs the labeling work successfully. Therefore, this system can be improved the safety and efficiency.

• Journal of Institute of Control, Robotics and Systems
• /
• v.3 no.5
• /
• pp.511-519
• /
• 1997

This paper presents the automatic recognition algorithm of the license number in on vehicle image. The proposed algorithm uses the correlation coefficient and Hough transform to detect license plate. The m/n ratio reduction is performed to save time and memory. By the correlation coefficient between the standard pattern and the target pattern, licence plate area is roughly extracted. On the extracted local area, preprocessing and binarization is performed. The Hough transform is applied to find the extract outline of the plate. If the detection fails, a smaller or a larger standard pattern is used to compute the correlation coefficient. Through this process, the license plate of different size can be extracted. Two algorithms to each separate number are proposed. One segments each number with projection-histogram, and the other segments each number with the label. After each character is separated, it is recognized by the neural network. This research overlomes the problems in conventional methods, such as the time requirement or failure in extraction of outlines which are due to the processing of the entire image, and by processing in real time, the practical application is possible.

• The Transactions of the Korea Information Processing Society
• /
• v.6 no.4
• /
• pp.868-876
• /
• 1999

In this paper, an efficient automatic video parsing technique on MPEG-compressed video that is fundamental for content-based indexing is described. The proposed method detects scene changes, regardless of IPB picture composition. To detect abrupt changes, the difference measure based on the dc coefficient in I picture and the macroblock reference feature in P and B pictures are utilized. For gradual scene changes, we use the macroblock reference information in P and B pictures. the process of scene change detection can be efficiently handled by extracting necessary data without full decoding of MPEG sequence. The performance of the proposed algorithm is analyzed based on precision and recall. the experimental results verified the effectiveness of the method for detecting scene changes of various MPEG sequences.