• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2000년도 제15차 학술회의논문집
• /
• pp.132-132
• /
• 2000

The reliability of EIC systems in hot rolling mill is indispensable and very important in order to maintain stable production. Signals obtained from sensors and control system should be analyzed to monitor the condition of down coiler in hot rolling mill. We develope a monitoring system of down coiler which is composed of three parts (1) data acquisition and MMI (2) signal processing and analyzing, and (3) automatic data saving. Also it is designed to enable to inform users the abnormal conditions of down coiler. This developed system is expected to make it possible to reduce long downtime, secure high facility precision, and maintain high control levels.

• 한국정보과학회:학술대회논문집
• /
• 한국정보과학회 2011년도 한국컴퓨터종합학술대회논문집 Vol.38 No.1(C)
• /
• pp.168-171
• /
• 2011

One important issue in semantic web is identification and selection of domain concepts for domain ontology learning when several hundreds or even thousands of terms are extracted and available from relevant text documents shared among the members of a domain. We present a novel domain concept acquisition and selection approach for ontology learning that uses affinity propagation algorithm, which takes as input semantic and structural similarity between pairs of extracted terms called data points. Real-valued messages are passed between data points (terms) until high quality set of exemplars (concepts) and cluster iteratively emerges. All exemplars will be considered as domain concepts for learning domain ontologies. Our empirical results show that our approach achieves high precision and recall in selection of domain concepts using less number of iterations.

• 한국우주과학회:학술대회논문집(한국우주과학회보)
• /
• 한국우주과학회 2004년도 한국우주과학회보 제13권2호
• /
• pp.304-307
• /
• 2004

Satellite orbit determination using angles only data from single ground station is carried out. The KOMPSAT-1 satellite mono-pulse angle tracking data from 9-meter S-band antenna at KARI site in Daejeon are used for the orbit determination. Various angle tracking arcs from one-day to five-day are processed and the orbit determination results are analyzed. Antenna pointing data are predicted based on the orbit determination results to check the possibility of re-acquisition and tracking of the satellite signal. Normal satellite mission operations including orbit determination, antenna prediction, satellite re-acquisition and automatic tracking from predicted antenna angle pointing data are concluded to be possible when three-day angle tracking data from single tracking station are used for the orbit determination.

• 한국통신학회논문지
• /
• 제21권7호
• /
• pp.1803-1813
• /
• 1996

This paper describes an automatic threshold decision using a maximum mismatched correlation value in the direct sequence spread spectrum (DS-SS) system. For received PN codes with different single-to-noise ratio (SNR), this scheme is able to detect a desired threshold value in the search mode, i.e. a maximum mismstched correlation value, so that value is utilized as a threshold for the verification mode. Performance of the proposed scheme in both the additive white gaussian noise (AWGN) and frequency-selective Rayleigh fading channels is analyzed through the Monte Carlo simulation. And hardware implementation of this scheme using a DSP processor is demonstrated. The proposed acquisition shceme is compared to the conventional constant threshold (CT) scheme, and significant improvement of performance is shown. Analysis of system performance in the verification mode is presented, and key quantities such as the false alarm probability and the detection probability are derived in a AWGN channel.

• 한국기계연구소 소보
• /
• 통권17호
• /
• pp.61-68
• /
• 1987

The main objective of this paper is to develop the computer-aided vibrational signal processing and monitoring system of rotating machinery. This system has an automatic data acquisition capability and analyze for machine fault diagnosis. By spectrum analysis, machine’s failure can be identified. The monitoring system enables diagnosis of the fault in rotating machinery. In this study, the conventional electrical fans are selected as a model case. The date processing and fault monitoring system proposed here can be applied to the automation of the inspection process in assembling motor-shaft systems. The automatic inspection can enhance the product quality and keep it stable. Since the proposed system is developed for personal computers, it might be cheap in cost and easy in installation.

• 한국정밀공학회지
• /
• 제9권2호
• /
• pp.128-137
• /
• 1992

An automatic noise detection system is developed to sense abnormal noises in operating a microwave electronic range. A noise detection method is presented which accounts for the effects of backgound and dynamic noises of the range. A recursive formula used as a noise estimator is a special case of the discrete-time Kalman filter in stochastic processes. Noise levels were measured using a noise acquisition processor in a closed room free of background noise, and detected signals were processes using a microcomputer. The results obtaines showed that the fault detection system should be fast in response to the data acquired and should be high in accuracy and reliability.

• Journal of the Korean Society for Industrial and Applied Mathematics
• /
• 제14권1호
• /
• pp.57-66
• /
• 2010

In this paper, we develop the Automatic Number Plate Recognition (ANPR) System. ANPR is generally composed of the following four steps: i) The acquisition of the image; ii) The extraction of the region of the number plate; iii) The partition of the number and iv) The recognition. The second and third steps incorporate image processing technique. We propose to resolve this by using Partial Differential Equation(PDE) based segmentation method. This method is computationally efficient and robust. Results indicate that our methods are capable to recognize the plate number on difficult situations.

• Journal of Electrical Engineering and Technology
• /
• 제10권4호
• /
• pp.1830-1835
• /
• 2015

In this paper, we propose an algorithm for the automatic registration of two rigid parts using multiple 3D sensor systems on a robot. Four sets of structured laser stripe system consisted of a camera and a visible laser stripe is used for the acquisition of 3D information. Detailed procedures including extrinsic calibration among four 3D sensor systems and hand/eye calibration of 3D sensing system on robot arm are presented. We find a best pose using search-based pose estimation algorithm where cost function is proposed by reflecting geometric constraints between sensor systems and target objects. A pose with minimum gap and height difference is found by greedy search. Experimental result using demo system shows the robustness and feasibility of the proposed algorithm.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 학술대회 논문집 전문대학교육위원
• /
• pp.120-123
• /
• 2003

Accurate acquisition of surface geometries such as machined surfaces, biological surfaces, and deformed parts have been very important technique in scientific study and engineering, expecially for system design, manufacturing and inspection. Two camera method keeps accuracy more than double than mechanical method. In this paper, we describe the processes surface data of teeth for automatic processing, transformation that changes to coping data of possible numeric data form, and processed inlay teeth. As the result of the Inlay manufacture, which can process with high resolution, therefore we construct the automatic processing system that depends on manual.

• 제어로봇시스템학회논문지
• /
• 제19권11호
• /
• pp.974-978
• /
• 2013

AVI (Automatic Vision Inspection) systems automatically detect defect features and measure their sizes via camera vision. AVI systems usually report different measurements on the same defect with some variations on position or rotation mainly because different images are provided. This is caused by possible variations from the image acquisition process including optical factors, nonuniform illumination, random noises, and so on. For this reason, conventional area based defect measuring methods have problems of robustness and consistency. In this paper, we propose a new defect size measuring method to overcome this problem, utilizing volume information that is completely ignored in the area based defect measuring method. The results show that our proposed method dramatically improves the robustness and consistency of defect size measurement.