• 시스템엔지니어링워크숍
• /
• s.1
• /
• pp.27-31
• /
• 2003

This study is in a part of requirements validation plan for korean rubber-tired AGT system on test track. The AGT system is consisted subsystems as vehicle, signalling, communication, power distribution and infrastructure for rubber tire running on track. The subsystems will be installed and integrated on test track till next year for test and evaluation. This paper shows overview for test and evaluation in terms of system requirements and its validation classification, test track configuration, measuring system requirements and its configuration. The whole process of system integration and its validation will be controlled by means of KMS including documentation.

• The Journal of Society for e-Business Studies
• /
• v.21 no.1
• /
• pp.79-90
• /
• 2016

Autonomous knowledge service, a fully-automated and pervasive service for knowledge acquisition and support based on the power of recent ITs is gaining tremendous interest more and more, as not only the level of users' intelligence increases but also the maturity of IT infrastructure improves. Conventional approaches of knowledge service, however, could not satisfy users because they usually provided undesired knowledge which had been acquired without considering users' want. In other words, knowledge acquisition and distribution were separately performed. This research, therefore, suggests an amended autonomous knowledge service framework by fully-automating the whole phases of knowledge life cycle, from knowledge acquisition to distribution. ASKs, the prototype system of this research, is also implemented by defining and specifying component technologies which constituently compose suggested framework. More user-friendly and applicable way of knowledge service will be derived and facilitated through this research.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.7
• /
• pp.2349-2357
• /
• 2010

This work focuses on the implementation and optimization of the Automated Storage and Retrieval System(AS/RS) which is associated with Logistics Information System(LIS). We survey literature and present a case study for the optimization of Logistics System. In the case study, we examine the adaptation and implementation of AS/RS after we analyzed the processes of the company. Logistics Information System is an important component to keep up with the competitive advantage in the global business environments. The company in the case applies LIS to its efficient physical distribution management. AS/RS leads to some benefits; maximized storage space, increased productivity, reduced labor costs and human error, and improved accuracy. AS/RS is found especially effective when working with narrow aisles and extremely high racks.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.23 no.3
• /
• pp.242-249
• /
• 2017

In order to develop an HNS safety management system to assess and visualize hazard levels via an automated method, we have conceptualized and configured a sample system. It is designed to quantify the risk of a vessel carrying HNS with a matrix method along navigational route and indicate hazards distribution with a contour map. The basic system which provides a visualized degree of hazards in real time has been introduced for the safe navigation of HNS ships. This is useful not only for decision making and circumstantial judgment but may also be utilized for HNS safety management with a risk base. Moreover, this system could be extended to address the navigational safety of marine traffic as well as of autonomous vessels in the near future if the sensors used are connected with IoT technology.

• Construction Engineering and Management
• /
• v.4 no.1 s.13
• /
• pp.48-54
• /
• 2003

An automated system for scanning and characterizing unbound aggregates, called the 'Laser-based Aggregate Scanning System'(LASS), has been developed at the University of Texas at Austin. The system uses a laser profiler to acquire and analyze true three-dimensional data on aggregate particles to measure various morphological properties. Tests have demonstrated that the system can rapidly and accurately measure grain size distribution and dimensional ratios, and can objectively quantify particle shape, angularity, and texture in a size invariant manner. In its present state of development, the LASS machine is a first-generation, laboratory testing device. With additional development, this technology is expected to provide high-quality, detailed information for laboratory and on-line quality control during aggregate production.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.7 no.4
• /
• pp.81-88
• /
• 2011

Mini Double Gears Frame is critical part of PDP and also produces couple hundred thousand every month. In the process of mass production, product inspection is very important process. Double Gear, one of the part of machine, was inspected by human eyes which caused mistakes and slow progress. To achieve the speed and accuracy the system was compensated by vision system which is inspecting automatically. The focus value is measured based on the fact that high contrast images have much high frequency edge information. High frequency term of the image is extracted using the high-pass filter and the sum of the high frequency term is used as the focus value. We used a Gaussian smoothing filter to reduce the noise and then measures the focus value using the modified Laplacian filter called a Sum modified Laplacian Focus values for the various lens positions are calculated and the position with the maximum focus value is decided as the focused position. The focus values calculated in various lens position showed the Gaussian distribution. We proposed a method to estimate the best focus position using the Gaussian curve fitting. Focus values of the uniform interval lens positions are calculated and the values are used to estimate the Gaussian distribution parameters to find the best focus position.

• Korean Journal of Construction Engineering and Management
• /
• v.6 no.1 s.23
• /
• pp.73-79
• /
• 2005

This paper, introduces a Stochastic Project Scheduling Simulation system (SPSS III) developed by the author to predict a project completion probability in a certain time. The system integrates deterministic CPM, probabilistic PERT, and stochastic Discrete Event Simulation (DES) scheduling methods into one system. It implements automated statistical analysis methods for computing the minimum number of simulation runs, the significance of the difference between independent simulations, and the confidence interval for the mean project duration as well as sensitivity analysis method in What-if analyzer component. The SPSS 111 gives the several benefits to researchers in that it (1) complements PERT and Monte Carlo simulation by using stochastic activity durations via a web based JAVA simulation over the Internet, (2) provides a way to model a project network having different probability distribution functions, (3) implements statistical analyses method which enable to produce a reliable prediction of the probability of completing a project in a specified time, and (4) allows researchers to compare the outcome of CPM, PERT and DES under different variability or skewness in the activity duration data.

• Industrial Engineering and Management Systems
• /
• v.2 no.1
• /
• pp.28-34
• /
• 2003

The fundamental design issues that arise in the pickup and delivery system planning are optimizing the system with minimum cost and maximum throughput and service level. This study is concerned with the development of pickup and delivery system with customer responsive service level, DCM(Demand Chain Management). The distribution process and service map are consisted of manufacturing, warehousing, and pickup and delivery. First we formulated the vehicle pickup and delivery problem using GIS-VRP method so as to satisfy the customer service requests. Second, we developed a GUI-type computer program using AVL, automated vehicle location system. The computational results show that the proposed method is very effective on a set of test problems.

• Journal of the Korean Society for Precision Engineering
• /
• v.20 no.4
• /
• pp.29-38
• /
• 2003

This paper deals with an automated computer-aided process planning and die design system with which designer can determine operation sequences even after only a little experience in process planning and die design of multi former-bolt products by multi-stage former working. The approach is based on knowledge-based rules, and a process knowledge base consisting of design rules is built. Knowledge fur the system is formulated from plasticity theories, empirical results and the empirical knowledge of field experts. Programs for the system have been written in AutoLISP for AutoCAD with a personal computer. An attempt is made to link programs incorporating a number of expert design rules with the process variables obtained by commercial FEM softwares, DEFORM and ANSYS, to form a useful package. The system is composed of four main modules. The process planning and die design module considers several factors, such as the complexities of preform geometry, punch and die profiles, specifications of available multi former, and the availability of standard parts. It can provide a flexible process based on either the reduction in the number of forming sequences by combining the possible two processes in sequence, or the reduction of deviation of the distribution and the level of the required forming loads by controlling the forming ratios. The system uses 2D geometry recognition and is integrated with the technology of process planning, die design, and CAE analysis. The standardization of die parts for multi former-bolt products requiring a cold forging process is described. The system developed makes it possible to design and manufacture multi former-bolt products more efficiently.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 1999.03b
• /
• pp.269-272
• /
• 1999

It is still hard to measure the strain distribution over entire surface of a medium or large-size stamped part even by using an automated strain measurement system. Several methods which enable to enlarge the measurement range without losing accuracy and precision are suggested in this study, The superposition of images having different high-lightened or damaged part each other results in an enhanced image. A new method for constructing the element connectivity from a line-thinned image makes it possible to identify up to 1,000 elements. And the geometry assembling algorithm is proved very efficient in which the whole area to be measured is divided into several parts ; the coordinate transformation between every two adjacent parts is obtained from the concept of the least square error ; and the 3-D shape or strain distribution over the whole surface is assembled,