• The Journal of the Korea Contents Association
• /
• v.11 no.5
• /
• pp.25-31
• /
• 2011

In this paper, we propose virtual building construction plans. For this, we compose the construction materials with components and assemble components in pattern. When we change assembled constructions, we can design the building efficiently with patterns if the parts are selected. Also through information analysis of material components or patterns, we can provide information which is necessary to a reconstruction to the designer. Using steal house method, the assembly functions were comprised of a wall, a room, a window, a door, roof etc. Also We explained the materials automatic extraction method which applies steal house.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.6B
• /
• pp.554-562
• /
• 2004

This paper proposes on the technical blocking method of Internet harmful pornographic sites which is the most Internet negative-function. At Present, most technical methods based on web sites back-searching or words filtering for blocking the pornographic Internet sites have limitations. For this, this paper proposes the acoustic and image based blocking method for filtering harmful Internet sites. For this, sexual main body parts are extracted by texture analysis and curve fitting. Also acoustic signals are analyzed using pratt tool and auto-correlation function is adopted for matching between prototype signals and test signals. Finally, the effectiveness of this paper is demostrated by several experiments.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.17 no.1
• /
• pp.144-152
• /
• 2018

The cleanability of machine parts is becoming increasingly important in the industrial field. In particular, cleanability is the most important factor in hydraulic products. The burr and chips are dominant factors of cleanability. If the burrs are not removed completely before the beginning of the machining stage, this will cause many problems, such as scratches and operation failure. Due to the complexity of the valve body itself, it is very difficult to use common deburring tools. In this study, a brush-like deburring tool was suggested and verified as a proper tool for removing the burrs and forming a proper edge shape through a real experiment. Various kinds of brush materials and process conditions were tested for proper deburring of the valve body. It was shown that the suggested method was successful for valve body deburring.

• Journal of Institute of Control, Robotics and Systems
• /
• v.19 no.12
• /
• pp.1125-1131
• /
• 2013

Nowadays, embedded software development using the MATLAB/Simulink system is gradually emerging. Studies generating the parts of embedded S/W in a Rapid Prototype are presented. In this paper, a method to generate the entire embedded S/W of enhanced AC motor control is proposed. High performance motor control could not be achieved with the basic Simulink library and RAppID Toolbox library as it does not have PWM based Interrupt, an ASAC (Analog Sensing for AC Motors) function and other special functions of the Freescale MPC555x. Consequently, the required libraries for enhanced AC motor control are created by Legacy code tool, TLC (Target Language Compiler) and S-Function (System-Function) of MATLAB/ Simulink and utilized in the Rapid Prototype. Motor control performance and execution time are compared automatically to the generated-code S/W with the hand coded S/W. The IPMSM (Interior Permanent Magnet Synchronous Motor) and MPC5553 board that were designed as the AC motor controller for hybrid electrical vehicle are used for the test. The performances meet the requirements and satisfactory results are acquired.

• Proceedings of the IEEK Conference
• /
• 2006.06a
• /
• pp.825-826
• /
• 2006

In this paper, we propose an algorithm that applies Rolle's theorem to automatically detect and label peak III and V of the normal, suprathreshold auditory brainstem response (ABR). ABR waveform were recorded from 55 normal-hearing ears at screening levels varying from 30 to 60 dBnHL. For each ABR waveform, the peak-finding algorithm proceeded in fourth steps: (1) Select maximum and minimum values of the target ABR waveform, (2) divide this range into n equal parts, (3) effective candidate peaks in the ABR waveform are identified using Rolle's theorem (4) peak III and V are identified from these candidate peaks based on their latency and morphology. As a result, proposed auto dectection method showed high correlation and accuracy with manual detection method performed by clinician. By using proposed algorithm, clinician can detect and label peak III and V faster and more efficient than manual detection method.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2005.05a
• /
• pp.185-190
• /
• 2005

The shot peening process is often used to improve fatigue properties of metal parts. Among them, It is the most use in an auto-component. In order to achieve optimum, repeatable and reliable fatigue enhancement from the shot peening process, the important shot peening parameters must be controlled. In this paper, the optimum peening intensity (Almen intensity) condition is investigated by experiment. The Spur Gear steel was used to investigate shot peening effects. The fatigue life at $\sigma_a=1,050$ and $\sigma_a=1,250MPa$ first gently increases, then drops gently as peening intensity increases compared with unpeened specimen. Experimental results show that the optimum peening intensity range is $0.391\~0.434mmA$..So the fatigue strength and fatigue life have been tremendously increased by optimum-peening treatment. However, the fatigue strength and fatigue life have been decreased by over peeing.

• Proceedings of the SAREK Conference
• /
• 2008.11a
• /
• pp.541-545
• /
• 2008

Particulate matter (PM) is one of the major indoor air pollutants especially in the subway station in Korea. In order to remove PM in the subway station, several kinds of PM removal system such as roll-filter, auto-washable air filter, demister, and electrostatic precipitator re used in the air handling unit (AHU) of subway station. However, those systems are faced to operation and maintenance problems since the filter-regeneration unit consisting of electrical or water jet parts is malfunctioned due to the high load of particulates and the filter material needs periodic replacement. In this study, we surveyed the particle removal systems in order to develop the new system of particle removing can be adopted in the current AHU of subway station.

• Journal of the Korea Safety Management & Science
• /
• v.13 no.1
• /
• pp.143-150
• /
• 2011

과거의 기업은 단순 생산과 관리만으로 기업을 유지시켜 왔다. 그러나 오늘날 제품 소비자들은 다양하고 복잡한 요구를 하고 있고 기업은 소비자들의 욕구를 충족시키지 못하면 존속할 수가 없다. 따라서 기업은 다양한 소비자의 요구에 대한 사회적, 경제적 환경변화에 대응 할 수 있는 최적의 기본 방침을 수립하고 그것을 실천하는 경영전략 수립이 필요하다. 경영전략 수립은 기업경영성과에 영향을 주는 가장 중요한 요인이라 할 수 있는데, 경영전략 수립과 기업경영성과라는 두 요인 사이에는 또 다른 복잡한 관리체계가 작용한다. 즉 생산시스템과 전사적 품질경영활동, 구성원들에 대한 보상, 그리고 조직구성원간의 관계 등이 영향을 미치는 것이다. 본 연구는 기업의 경영전략과 관리체계인 생산시스템, TQM 활동과 종업원에 대한 보상이 경영성과에 어떠한 영향이 있는지를 파악하고 이것을 기반으로 실증적 자료를 수집하여 분석 검증함으로써 기업발전의 토대로 삼고자 한다. 자료 분석을 위하여 SPSS 통계 패키지를 이용하였고, 각 연구 가설과 연구 모형은 구조방정식을 이용하여 검증하였다.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.14 no.3
• /
• pp.277-286
• /
• 2001

Among the ULSAB methods for the lightweight automobile body, Tailor Welded Blank(TWB) is adopted and the design process is developed for the existing component. Topology optimization conducted to find the distribution of the variable thickness. The number of parts and the welding lines are determined from it. In the detail design, size optimization is carried out to find the optimum thickness of each part and then, the final parting lines are tuned by shape optimization. A commercial optimization software GENESIS is utilized for the optimization processes.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.12 no.1
• /
• pp.196-202
• /
• 2004

The development of new materials with light weight and high strength has become vital to the machinery, aircraft and auto industries. However, there are a lot of problems with developing such materials that require expensive tools, and a great deal of time and effort. Therefore, the improvement of fatigue strength and fatigue life are mainly focused on adopting residual stress(in this thesis). The compressive residual stress was imposed on the surface according to each shot velocity(57, 70, 83, 96 m/sec) based on Shot-peening, which is the method of improving fatigue life and strength. By using the methods mentioned above, the following conclusions have been drawn. 1. The fatigue crack growth rate(da/dN) of the Shot-peened material was lower than that of the Un-peened material. And in stage I, ΔKth, the threshold stress intensity factor, of the shot-peen processed material is high in critical parts unlike the Un-peened material. Also m, fatigue crack growth exponent and number of cycle of the Shot-peened material was higher than that of the Un-peened material. That is concluded from effect of da/dN. 2. Fatigue life shows more improvement in the Shot-peened material than in the Un-peened material. And compressive residual stress of surface on the Shot-peen processed operate resistance force of fatigue crack propagation.