• International Journal of Contents
• /
• v.11 no.4
• /
• pp.70-76
• /
• 2015

The development of technology provides and increases security as well as convenience for humans. The development of new technology directly affects the standard of life thanks to smart home automatic control systems. This paper describes a door control, automatic curtain, home security (CCTV, fire, gas, safe, etc.), home control (energy, light, ventilation, etc.) and web-based smart home automatic controller. It also describes the use of ARM (Advanced RISC Machines) for automatic control of home equipment, a Multi-Axes Servo Controller using FPGA (Field Programmable Gate Array) and PLC (programmable logic controller). Additionally, it describes the development of a HTML editor using web auto control software. The tab loading time (7 seconds) is faster when using ARM-based web browser software instead of Chrome and Firefox is used because the browser has a small memory footprint (300M). This system is realized by web auto controller language which controls and uses PLCs that are easier than existing devices. This smart home automatic control technology can control smart home equipment anywhere and anytime and provides a remote interface through mobile equipment.

• Journal of Auto-vehicle Safety Association
• /
• v.15 no.2
• /
• pp.13-20
• /
• 2023

This paper presents a fault tolerant control strategy for Steer-by-Wire (SbW) systems. Among many problems to be solved before commercialization of SbW systems, maintaining reliability and fault tolerance in such systems are the most pressing issues. In most previous studies, dual steering motors are used to achieve actuation redundancy. However, relatively few studies have been conducted to introduce fault tolerant control strategies using rear wheel steering system. In this work, an actuator fault in front wheel steering is compensated by active rear wheel steering. The proposed fault tolerant control algorithm consists of disturbance observer and sliding mode control. The fault tolerant control performance of the proposed approach is validated via computer simulation studies with Carsim vehicle dynamics software and MATLAB/Simulink.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.41 no.6
• /
• pp.488-494
• /
• 2013

The control law design and analysis environment of the FBW helicopter system have been developed using model base design method. The model based design is generally used in a aircraft, unmanned aerial system and automobile as well as rotorcraft development. The model based design provides many advantages such as development risk and schedule reduction using simulation and autocode generation. This paper describes a development of process for verification and validation of auto generated code for FBW helicopter flight control law. And this process is applied for Fly-By-Wire Helicopter Development Project. The results of functional test for auto generated code meet several specific requirements.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.4
• /
• pp.1233-1238
• /
• 2010

The lighting industry has become the bigger and more systemized using the semiconductor LED with each control R(Red), G(Green), B(Blue). The communication standard DMX512(ANSI E1.11) protocol of it basically needs the address which can be distinguished between the lighting terminals. The conventional method has to give the address of the lighting any methods like dip switch, EEROM and PROM. Then the lighting terminal can receive RGB data from DMX512 communication. According to electrical characteristics DMX512 protocol has to the splitter every 32 lighting terminals. If 512 lightings is all connected, maximum 16 splitters are needed. This paper is solved above weakness in DMX512 protocol using serial connection all lighting terminals. Also I developed the intelligent lighting terminal with auto-addressing. This was solved the inconvenience of the address assignment and the usage of the splitter. The developed products is applied and selled the semiconductor lighting terminals using ON-OFF control, dimming control, sequential control and rainbow control.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.36 no.7
• /
• pp.797-803
• /
• 2012

Proportional solenoid valves are a modulating type that can control the displacement of valves continuously by means of electromagnetic forces proportional to the solenoid coil current. Because the solenoid-type modulating valves have the advantages of fast response and compact design over air-operated or motor-operated valves, they have been gaining acceptance in chemical and power plants to control the flow of fluids such as water, steam, and gas. This paper deals with the auto tuning of the position controller that can provide the proportional and integral gain automatically based on the dynamic system identification. The process characteristics of the solenoid valve are estimated with critical gain and critical period at a stability limit based on implemented relay feedback, and the controller parameters are determined by the classical Ziegler-Nichols design method. The auto-tuning algorithm was verified with experiments, and the effects of the operating point at which the relay control is activated as well as the relay amplitude were investigated.

• Proceedings of the KIEE Conference
• /
• 2004.07d
• /
• pp.2501-2503
• /
• 2004

In this paper, we propose an auto-tuning control algorithm for a mobile robot. This controller consists of a three layer neural networks and a PID controller. In order to compensate for uncertainties from unknown dynamics and ignored dynamic effects such as slip conditions, neural network based position schemes are proposed. The results of simulations show the validity of proposed method. This controller learns quickly the model and has good position control performance.

• 제어로봇시스템학회:학술대회논문집
• /
• 2002.10a
• /
• pp.102.5-102
• /
• 2002

In this paper auto-tuning scheme of PID controller based on the reference model has been studied by immune algorithm for a process. Up to this time, many sophisticated tuning algorithms have been tried in order to improve the PID controller performance under such difficult conditions. However, in the actual plant, they are manually tuned through a trial and error procedure, and the derivative action is switched off. Therefore, it is difficult to tune. Simulation results by immune based tuning reveal that tuning approaches suggested in this paper is an effective approach to search for optimal or near optimal process control.

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.39 no.5
• /
• pp.485-493
• /
• 1990

The idea of expert control is to incorporate a rule based expert system in a feedback control system. In this paper, we present some heuristic rules based on relay experiment for the choice of controller structure and the setting of the controller parameters. Heuristic rules are used as an element of the feedback loop in an auto-tuning PID controller. The algorithms are coded in a form which is as pure as possible and the heuristic logic is implemented with the rules. This paper reports an implementation of an expert controller on microcomputer-based system, including an industrial programmable controller.

• 제어로봇시스템학회:학술대회논문집
• /
• 2003.10a
• /
• pp.2345-2348
• /
• 2003

This paper deals with a problem of automatic landing guidance and control system design. The auto-landing control system for the longitudinal motion is designed in the classical PID controller. The controller gains are properly adapted to variation of the performance using fuzzy logic as a gain scheduler for the PID gains. This control logic is applied to the problem of the automatic landing control system design. From the numerical simulation using the 6DOF nonlinear model of the associated airplane, it is shown that the auto-landing maneuver is successfully achieved from the start of the flight conditions: 1500 ft altitude, 250 ft/sec airspeed and zero flight path angle.

• 제어로봇시스템학회:학술대회논문집
• /
• 2000.10a
• /
• pp.442-442
• /
• 2000

The intelligent auto-tuning method fur a strongly stable adaptive control system of a DC motor with great load inertia variation is proposed. The stable characteristic polynomial that is designed by an optimal servo is specified for the adaptive pole placement control system. The appropriate adaptive control system can be derived, by adjusting automatically the weight of a performance criterion in optimal control by means of the fuzzy inference on the basis of the stability index.