• Bulletin of the Society of Naval Architects of Korea
• /
• v.11 no.2
• /
• pp.1-6
• /
• 1974

The three-dimensional correction factor of the added mass of finite-length elliptic cylinders in vertical vibration in a free surface was calculated. This problem has already been dealt by T. Kumai[5] to contribute to analytical prediction of the three-dimensional correction factor for the added mass in vertical vibration of ships. In Kumai's work, the body boundary condition involved in the appropriate boundary value problem was approximately treated in the course of obtaining the solution. In this work, obtaining the solution derived from mathematically exact treatment of the body boundary condition, the author recalculated the three-dimensional correction factor for length-beam ratio $4{\sim}8$, beam-draught ratio $2.00{\sim}4.50$ and number of nodes from 2 to 7. And the numerical results were compared with both Kumai's results and the author's experimental data for two and three-noded vibrations of the cylinder of beam-draught ratio 2.40 The comparison of the numerical results shows that the author's are always higher than the Kumai's as expected. And the comparison of the numerical results with experimental data shows that the Kumai's numerical results have less deviation in case of two-noded vibration, and that, in case of three-noded vibration, the author's numerical results are in fairly good correspondence.

• The Journal of Korean Medical History
• /
• v.25 no.2
• /
• pp.137-153
• /
• 2012

A thesis insisting that Sugjong's medical doctor Yoo Itae(劉以泰) and the author of Marjinpyeon Yoo Itae(劉爾泰) are not a same person and his activities were in Heonjong(헌종) period, and his writing Marjinpyeon is in 1846, is published. In this study, I'd like to reveal that Yoo Itae(劉爾泰), the Marjinpyeon's author and Yoo Itae(劉以泰), Sugjong's medical doctor are a same person through analysis of Geochang Yoo's genealogy, articles, The True Record of the Joseon Dynasty, Seungjeonilgi, Taeweonseonsaengan, Sancheong-gun's paper, Sancheong Hyanggyo's paper, Sancheong-gun's paper, The geographic paper, Dongyuhagan, Sawoo Munjib, and analysis of folk story, the wrote year of his Marjinpyeon and Inseomunkyunrok and his birth year. According to my analysis, Yoo Itae(劉爾泰), the Marjinpyeon's author and Yoo Itae(劉以泰), Sugjong's medical doctor are a same person. And Marjinpyeon is written in 1696, the year of Byongja, and other his books, InseoMungyonlok at 1709, the year of Gichug. In conclusion, Yoo Itae(劉以泰.劉爾泰) was a famous medical doctor at Sancheong, born in 1652 (HyoJong the $3^{rd}$ year) and passed in 1715 (SugJong the 41th year), left books of Marjinpyeon, Silheomdanbang, and Inseomunkyunrok.

• Journal of Engineering Education Research
• /
• v.21 no.2
• /
• pp.51-59
• /
• 2018

The author investigated the momentum of the maker movement and its educational implications with the following four research questions: 1. What is the maker movement? 2. What is the nature of our societal interest in the maker movement? 3. Which learning theories are associated with the maker movement? 4. What are the educational implications of the maker movement? The author reviewed the history of education in terms of the maker movement and concluded that Papert's learning-by-making approach provided a theoretical foundation of the maker movement. The maker movement aims to engage participants in Do-It-Yourself(DIY) activities, the spirit of tinkering, and a hands-on approach. Also, the maker movement meets the educational demands of fostering students' 21st-century abilities and technological literacy. Lastly, the author anticipated the issues that may arise following the introduction of the maker movement in K-12 schools. In conclusion, the author discussed the challenges of the school maker education movement and suggested the bottom-up approach to utilize the school resources of technology and engineering education.

• International Journal of Computer Science & Network Security
• /
• v.22 no.5
• /
• pp.330-334
• /
• 2022

In light of the decreasing crop production and shortage of food across the world, one of the crucial criteria of agriculture nowadays is selecting the right crop for the right piece of land at the right time. First problem is that How Farmers can predict the right crop for cultivation because famers have no knowledge about prediction of crop. Second problem is that which algorithm is best that provide the maximum accuracy for crop prediction. Therefore, in this research Author proposed a method that would help to select the most suitable crop(s) for a specific land based on the analysis of the affecting parameters (Temperature, Humidity, Soil Moisture) using machine learning. In this work, the author implemented Random Forest Classifier, Support Vector Machine, k-Nearest Neighbor, and Decision Tree for crop selection. The author trained these algorithms with the training dataset and later these algorithms were tested with the test dataset. The author compared the performances of all the tested methods to arrive at the best outcome. In this way best algorithm from the mention above is selected for crop prediction.

• Journal of the Korean Institute of Navigation
• /
• v.1 no.1
• /
• pp.27-44
• /
• 1977

The Maneuvering Indices of a ship are the values that decide the quantity of her motion in turning when her rudder is turned over to an angle to the starboard or the port. They consist of two kinds of indices, one of which is called index K and the other, index T. Index K decides a ship's turning ability and index T does the length of time delay of a normal turning motion after her rudder has finished the turn of an ordered angle. Generally, the values of the indices are calculated through some mathematic formulas with figures of her heading degrees recorded at a fixed time intervals during her Z test. The values of the same kind index of a ship appear differently according to the ship'sspeed, trim, rudder angle and loaded condition, etc. In this paper, the author analyzed all the amthematic formulas required to calculate the values of the indices in their forming process and examined them from the point of mathematics and dynamics and also actually figured out the values of maneuvering indices of the M.S. "HANBADA", the training ship of Korea Merchant Marine College through her Z test. The author supposed a case in which two same typed ships as the "HANBADA" in size, shape and conditions were approaching each other in meeting end on situation and each ship turned her rudder hard over to the starboard respectively when they approached to the distance of 3 times as long as the ship's length. The author worked out mathematic formulas calculating forward and transverse ship's motions within the above mentioned situation for the quantative analysis of the collision avoding action to certify whether they are in collision status or not. Applying the calculated values of the maneuvering indices of the "HANBADA" to the motion calculating formulas, the author found out the two ships were passing over each other with the clearing distance o 39m between their port quarters. With the above mentioned examinations and explanations, the author demonstrated that a ship's motion in any collision avoiding action can be shown with quantities of time and distance within reliable limit.istance within reliable limit.

• Bulletin of the Society of Naval Architects of Korea
• /
• v.3 no.1
• /
• pp.33-45
• /
• 1966

The effect of thermal stress on a ship's hull is not considered to be serious by most naval architects. Frequently, however, cracking of hulls has been reported which occurred at sea while there were no external forces except the heat from the sun. Detailed investigations have been made of these reports and it has been reliably determined that the damage was initiated by solar heating. The author is not interested in all steel ship or in the applicability and validity of the formular itself, as it has already been proven by the experiments such as S.S. Boulder Victory. The author therefore proceeds directly to calculate the stress distribution on he hull and superstructure of the prototype model ship. These calculations are based on the experimental nonsymetrical temperature gradient data taken earlier on the Boulder Victory. The calculations were made principally to determine the extent of stresses which occurred on an all-steel ship in one case and secondly, those that occurred on a ship with a steel hull and an aluminum superstructure. From the calculations, the author expected the stress distribution of the two case would show distinctly different aspects, but the acquired results were very similar. Generally, at the point of junction of the steel hull and aluminum superstructure sharp peak stresses appeared. At the juncture of the superstructure and the main deck the ship with the aluminum superstructure registered almost 1000 psi more stress than did the ship with the all-steel construction. In the view of these findings, the author recommends to ship designers that pay particular attention to the point of junction of steel and aluminum plate. The author has proven that it is extremely important that a greater safety factor be used at the aluminum-steel junction point than at any other point. Although thermal effects cause high juncture-point stresses in all-steel ships, they are not nearly as critical as in ship constructed of two or more metals.

• The Journal of the Korea Contents Association
• /
• v.12 no.1
• /
• pp.17-29
• /
• 2012

In recent years, Linked Data that is published under an open license shows increased growth rate and comes into the spotlight due to its interoperability and openness especially in government of developed countries. However there are relatively few out-links compared with its entire number of links and most of links refer a few hub dataset. These occur because of absence of technology that identifies entities in Linked data. In this paper, we present an improved author entity resolution method that using representative properties. To solve problems of previous methods that utilizes relation with other entities(owl:sameAs, owl:differentFrom and so on) or depends on Curation, we design and evaluate an automated realtime resolution process based on multi-ontologies that respects entity's type and its logical characteristics so as to verify entities consistency. The evaluation of author entity resolution shows positive results (The average of K measuring result is 0.8533.) with 29 author information that has obtained confirmation.

• Journal of Korean Library and Information Science Society
• /
• v.42 no.2
• /
• pp.105-125
• /
• 2011

This paper grasps about various features of the coauthorship network based on the co-author frequency in the Korean LIS Research Community. This issue includes many topics such as changable aspects of coauthorship network, properties of higher cooperative authors groups. This work is mostly analyzed through a bibliographic analysis of articles which is published from 2000 to 2009(10 years) in Korean Library & Information Science major four journals. The results show three major implications. 1) There is a various structural changes of coauthorship network on the change of the co-author frequency. 2) There are 21 research pairs in the higher cooperative authors groups with the co-author frequency more than five. 3) There seems that any subjective relations between the articles which is produced by 21 research pairs were not clearly presents.

• Journal of the Korean Society of Costume
• /
• v.61 no.4
• /
• pp.14-23
• /
• 2011

The present study aims to apply the theory of Brecht's 'Verfremdung' or distancing effect to the process of fashion design. The distancing effect refers to an avant-garde artistic technique that enables artists to create their works by viewing particular objects separately from the phenomena that occur around those objects. Brecht encouraged a sense of purpose that involved shifting to the new society sought by modernism. He also suggested an artistic approach that isolates perception from judgment 'Verfremdung' which reflects his approach well. In this paper, with the distancing effect considered as a method for creation, the author identifies the system of thought associated with the distancing method and applies this system to fashion design. To this end, the author first reviewed the concepts of 'Entfremdung' (alienation) and the distancing effect and studied the backgrounds of the two concepts. Next, the author identified Brecht's epic theory and its application. As a result, a method of perceiving objects as used with the distancing effect was noted, and this method was utilized to distinguish the relationship between the body and its clothes. Specifically of interest were parts of the human body and the related functions of clothes as well as the motor functions of the body and detailed decorations on clothes. Moreover, the author discovered a trend in the wearing of clothes that exists in the context of historical changeability by examining Brecht's work as it relates to the types of clothes that are worn. Finally, the author applied the distancing effect to fashion design in consideration of the discovered trend.

• Journal of the Korean Society for information Management
• /
• v.34 no.2
• /
• pp.7-26
• /
• 2017

There has been growing interest in the methods for measuring the credits of individual authors in multi-authored research papers in response to the increase of research collaboration. Having a good understanding for academic norms of individual discipline is essential to measure author credit effectively. However, many Korean universities do not consider different norms for determining the order of authors across disciplines. Rather, they tend to use a standardized method to assess the credits of authors in multi-authored papers. Therefore, this study presented some problems of applying a standardized method to measure author credits in multi-authored papers in economics. The findings of this study confirmed the frequent use of alphabetical author order in economics papers; however, many university guidelines for research evaluation do not take account the alphabetical authorship in measuring the credits of authors. The authors suggest the needs for (1) establishment of a clear definition for primary authors, (2) flexibility in assessment methods for author credit, and (3) empirical research on author credit.