• The Journal of Korean Academy of Prosthodontics
• /
• v.51 no.2
• /
• pp.119-124
• /
• 2013

Many of the patients with extensive abrasion need comprehensive restorative treatment. The abrasion is usually caused by attrition, besides of it, there are many reasons for it. The plan of treatment should be started on assessment of the type of attrition and the etiologic analysis. Patient with well-developed masticatory muscle, alveolar process, and high occlusal force and also with little muscle length difference between the stable and the contracted state should be carefully assessed for the vertical dimensional loss and the restoration should be carefully designed. Decrease of tooth length can be compensated by the growth of the alveolar bone height; therefore, consistency of the occlusal vertical dimension is maintained. Accordingly, a careless increase of the vertical dimension can produce muscle fatigue, depressed tooth and pain, and fracture of the restoration. In this case, the patient with multiple tooth abrasion and clenching habit, the edentulous maxillary area is restored with amalgam inserted RPD, and the dentulous area of the maxilla and mandible are treated with fixed restoration accompanying with the increase of vertical dimension. Consequently, we are going to report about the satisfying result in both functional and esthetic aspects.

• The Journal of Korean Academy of Prosthodontics
• /
• v.54 no.1
• /
• pp.65-71
• /
• 2016

Gradual occlusal attrition is a normal process of aging. However, severe attrition causes pathogenic pulp, occlusal disharmony, functional disorder and esthetic problems. Alteration of vertical dimension should be considered for space regaining for tooth restoration, esthetic improvement or correction of occlusal relationship. Vertical dimension should be determined within the range of minimal invasive process satisfying patient's esthetic requirements and operator's functional goal. And patient's adaptation to newly determined vertical dimension should be assessed simultaneously. Deep overbite is not a simple problem of overbite, instead it is an usually complicated problem with anterior-posterior occlusal relationship. Considering these facts, appropriate restoration of edentulous part as well as improvement of anterior-posterior relationship should be performed to solve this fundamental problems. In this study, a 67 year-old male patient with many worn teeth and loss of posterior teeth was treated with removable partial denture at edentulous mandibular area to increase vertical dimension and fixed prostheses at dentulous maxillary and mandibular area. With these treatments, we attained a satisfactory result in functional and esthetic aspects as a report case.

• Korean Journal of Materials Research
• /
• v.22 no.6
• /
• pp.321-327
• /
• 2012

The production of functional activated carbon materials starting from inexpensive natural precursors using environmentally friendly and economically effective processes has attracted much attention in the areas of material science and technology. In particular, the use of plant biomass to produce functional carbonaceous materials has attracted a great deal of attention in various aspects. In this study the preparation of activated carbon has been attempted from rice husks via a chemical activation-assisted microwave system. The rice husks were milled via attrition milling with aluminum balls, and then carbonized under purified $N_2$. The operational parameters including the activation agents, chemical impregnation weight ratio of the calcined rice husk to KOH (1:1, 1:2 and 1:4), microwave power heating within irradiation time (3-5 min), and the second activation process on the adsorption capability were investigated. Experimental results were investigated using XRD, FT-IR, and SEM. It was found that the BET surface area of activated carbons irrespective of the activation agent resulted in surface area. The activated carbons prepared by microwave heating with an activation process have higher surface area and larger average pore size than those prepared by activation without microwave heating when the ratio with KOH solution was the same. The activation time using microwave heating and the chemical impregnation ratio with KOH solution were varied to determine the optimal method for obtaining high surface area activated carbon (1505 $m^2$/g).

• The Korean Journal of Ceramics
• /
• v.3 no.2
• /
• pp.116-123
• /
• 1997

A chemically stabilized $\beta$-cristobalite, which is stabilized by stuffing cations of $Ca^{2+}$ and $Al^{3+}$, was prepared by a solution-polymerization route employing Pechini resin or PVA solution as a polymeric carrier. The polymeric carrier affected the crystallization temperature, morphology of calicined powder, and particle size distribution. In case of the polyvinyl alcohol (PVA) solution process, a fine $\beta$-cristobalite powder with a narrow particle size distribution (average particle size : 0.3$\mu\textrm{m}$) and a BET specific surface area of 72 $\m^2$/g was prepared by an attrition-milling for 1 h after calcination at 110$0^{\circ}C$ for 1h. Wider particle size distribution and higher specific surface area were observed for the $\beta$-cristobalite powder derived from Pechini resin. The cubie(P1-to-tetraganalb) phase transformation in polynystalline $\beta$-cristobalite was induced at approximately 18$0^{\circ}C$. Like other materials showing transformation toughening, a critical size effect controlled the $\beta$-to-$\alpha$ transformation. Densifed cristobalite sample had some cracks in its internal texture after annealing. The cracks, occurred spontaneoulsy on cooling, were observed in the sample with an average grain sizes of 4.0 $\mu\textrm{m}$ or above. In case of the sintered cristobalite having a composition of CaO.$2Al_2O_3$.40SiO$_2$, small amount of amorphous phase and slow grain growth during annealing were observed. Shear stress-induced transformation was also observed in ground specimen. Cristobalite having a composition of CaO.2Al2O3.80SiO2 showed a more sensitive response to shear stress than the CaO.$2Al_2O_3$.40SiO$_2$ type cristobalite. Shear-induced transformation resulted in an increase of volume about 13% in $\alpha$-cristobalite phase on annealing for above 10 h in the case of the former composition.

• Archives of Plastic Surgery
• /
• v.33 no.1
• /
• pp.120-123
• /
• 2006

Spontaneous extensor pollicis longus tendon rupture is commonly caused by attrition of the tendon from trauma or inflammatory processes. We experienced a patient with extensor pollicis longus tendon rupture after steroid injection, in which the rupture may have been caused by the effects of steroid itself as well as direct damage from the needle. A 51-year-old woman complained of inability to extend her right thumb at the first metacarpophalangal & interphalangeal joint level. The patient had a history of local steroid injection into the dorsal & radial side of wrist on two occations, and had no history of trauma or rheumatologic disease. After a physical examination of the patient, we decided to explore the wrist. The patient agreed with operation. Intraoperatively, an incision was made into the wrist and the proximal and distal ends of the ruptured extensor pollicis longus tendon were identified. The defect between the proximal and the distal end was measured to approach 8cm, and a palmaris longus tendon graft was performed. After three months of rehabilitation, the first metacarpophalangal & interphalangeal joint recovered the normal range of motion. Steroid injection has been widely used in various musculoskeletal disorders such as rheumatoid arthritis and osteoarthritis. However, inadvertent steroid injection into the extra or intra articular spaces may lead to tendon rupture. Steroids reduce tensile strength by decreasing tenocyte activity and collagen synthesis. Also, the physical effect of direct needle-stick injury into the mesotenon and blood vessels around the tendon may cause damage. In addition, hematoma and edema may increase pressure around the tendon and compromise blood supply, leading to tendon degeneration and subsequent rupture. When injecting steroid into an articular area, all physicians should have a complete understanding of the surrounding anatomy and always keep in mind the hazards of such procedures.

• Food Science and Preservation
• /
• v.8 no.4
• /
• pp.434-441
• /
• 2001

The purpose of this research is the establishment of optimal processing and the quality improvement of confectionary analysis of the damaged starch content of flour. I studied the rheological and bread making properties of the dough containing different damaged starch content. I examined rheological and physico- chemical characteristic farinograph, extensograph and amylograph with DNS, CWRS and SW containing 6.5%, 8.2%, 9.0%, 9.0% and 10.5% of damaged starch. And I measured the hardness and specific volume and performed the functional survey by rheometer for quality control. In the amylogram, at the damaged starch content 9.5% at such the maximum viscosity was 900 B.U. the volume of bread fermention tolerance were increased. In addition, the extensegram after 135 min showed that maximum resistance of the dough were 570 B.U at the damaged starch contents of 9.5% and the bread had homogeneous air cells and internal structures at the damaged starch contents of 9.5% at which the area(A), resistance(R) and R/E value of the dough were highest.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.24 no.4
• /
• pp.781-787
• /
• 1997

In spite of the improvements of the techniques in the field of preventive dentistry, many children still present with extensive destruction of primary anterior teeth. Not only the practioner must consider the pulp state of the primary incisor, but also restore the form, function and esthetics of the tooth. Restorative treatment of primary incisor tooth requires durability, retention and esthetics. Stainless steel crowns used in restoring primary anterior teeth is retentive and durable in comparison with the composite resin, celluloid crown. But they are not esthetic. To enhance the esthetics of the anterior stainless steel crown without reducing its superior retention, an open-face stainless steel crown has been suggested. Several authors have suggested cutting away the labial portion of the stainless steel crown and placing the composite resin in that area. By following this technique, the practioner can prepare a retentive, durable, and esthetic restoration for primary teeth which have suffered from extensive loss of teeth structure. In addition, the single missing primary anterior teeth can be successfully restored by soldering the stainless steel crown together. Open-face stainless steel crown is indicated in the areas of large interproximal lesions involving incisal edge, crown fracture with pulp exposure and congenital malformation of the teeth. By this technique, the practioner can restore primary anterior teeth successfully regardless of the amount of remaining tooth structure, bruxism habit and presence of attrition. In this case, rampant caries with extensive loss of tooth structure and single missing of primary anterior tooth hart been successfully treated with open-face stainless steel crown.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.4 no.3
• /
• pp.226-236
• /
• 1999

Growth, reproduction, mortality, and production of Laminaria japonica were experimentally studied at a cultivation ground on the coast of llkwang, where the largest amount of cultivated Laminaria has been produced in Korea. For this experiment, young sporophytes (0.33 cm in mean length) grown in the laboratory were transplanted at the depth of 3 m and field surveys on them were conducted twice a month from December, 1995 to August, 1996. Plants exhibited an annual life span; they were completely dead by August. Frond width, thickness, and wet weight showed similar pattern of seasonal growth and reached their maxima in July, but frond length showed no more increment after May. Maximum mean frond length and weight were 199.8 cm and 333.0 g wet wt., respectively. Overall meristematic growth in length and weight were 384.0 cm and 393.6 g wet wt., respectively. Absolute growth rates (AGR) which were calculated from the length of tissue developed from meristem varied seasonally; AGR of length and weight reached maxima in March (3.6 $cm{\cdot}d^{-1}$) and May (3.8 g wet $wt{\cdot}d^{-1}$), respectively. Absolute attrition rates gradually increased from February to July. Seasonal differences in growth and attrition rates appeared to be related to seawater temperature and nitrogen concentration in seawater. Reproductive sporophytes bearing sprorangium sorus began to occur from April, and the ratio of sorus area to blade area reached its maximum in July (0.034). Survival rate was exponentially decreased; more than 90% of plants decayed within 56 days after outplanting. After February, mortality was size-specific; mortality of smaller plants less than 30 cm in length were relatively higher. Maximum biomass occured in July (285.6 kg wet $wt{\cdot}m^{-2}$) and annual production was 758.7 kg wet $wt{\cdot}m^{-2}$.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.27 no.1
• /
• pp.1-6
• /
• 2000

Dentinogenesis imperfecta is an inherited disorder of dentin formation, usually exhibiting an autosomal dominant mode of transmission. Type I dentinogenesis imperfecta occurs in patients afflicted with osteogenesis imperfecta. Type II dentinogenesis imperfecta is not associated with osteogenesis imperfecta. Type III dentinogenesis imperfecta (Brandywine type) occurs in a racial isolate area in the state of Maryland. In all three types, teeth of both dentitions are affected with variable clinical appearances. The teeth are opalescent with the color ranging from bluish-gray to brown to yellowish. The dentin is abnormally soft, providing inadequate functional support to the overlying enamel. Although the enamel is normal, it fractures or chips away easily, exposing the occlusal and incisal dentin. The exposed soft dentin often undergoes rapid and severe functional attrition. The teeth exhibit bulb-shaped crowns with constricted cementoenamel junctions and thin roots. The teeth will exhibit varying stages of obliteration of the coronal and root pulpal chambers. The cementum, periodontal ligament and supporting alveolar bone appear normal. The enamel is normal. The mantle dentin remains nearly normal, whereas the remaining dentin is severely dysplastic. The dentinal tubules are disoriented, irregular, widely spaced, and usually larger than normal.

• Journal of Wetlands Research
• /
• v.7 no.2
• /
• pp.105-120
• /
• 2005

This study was carried out at Reed Marsh of Sihwa Lake from July 2003 to June 2004. We observed total(sum of maximum population) 5,752 individuals of 70 species including 12 species of ducks, 10 species of egrets, 6 species of wagtails and buntings, 4 species of eagles. The most dominant species was Spotbill Duck(Anas poecilorhyncha - 3,518 individuals, 61.16%), and other species were Mallard(Anas platyrhynchos - 540 individuals, 9.39%), Great Reed-Warbler(Acrocephalus arundinaceus - 217 individuals, 3.77%). Reed Marsh of Sihwa Lake were observed many kinds of protected species such as Great Bittern(Botaurus stellaris), Mandarin Duck(Aix galericulata), Chinese Sparrow Hawk (Accipiter soloensis), Eurasian Sparrow Hawk(Accipiter nisus), Japanese Buzzard(Buteo buteo), Hen Harrier(Circus cyaneus), Eurasian Hobby(Falco subbuteo), and Common Kestrel(Falco tinnunculus). Since the Reed Marsh of Sihwa Lake arrived many individuals of waterbird, crop damage by the waterbird occurred in the surrounding rice fields. It was an area adjacent to the reed marsh of sihwa lake such as Yoopori and Samhwari Bibongmyoun, Yamokri Maesongmyoun Hwaseong City. Bird of crop damage was ducks openly. The most species was Spot-billed Duck. Crop damage types by the Spot-billed Duck were grazing, used the grain up or lower in quality with step on the rice. Crop damage size was about 560bags of rice during the one month on August 2002. In 2003, After carrying out the various crop damage reduction countermeasures, which measured crop damage size in 2002's crop damage area. It happened about 152bags of rice during the two months from on August to September 2003. Migration routes of Spot-billed Duck were that it was migrated from up the sihwa lake to reed marsh. It took a rest at reed marsh and migrated the surrounding rice fields for the feeding action. In 2002, it was migrated direct from up the sihwa lake to in surrounding rice fields. But as environment of reed marsh was improved better than 2002, it was migrated to reed marsh because of reducing the energy attrition rate. Crop damage reduction countermeasures are get on ears to use explosion machine, searchlight, start-gun and patrol at regular intervals. Which was an effect short term. Indirect method is to make a feeding area of substitution at up the sihwa lake and reed marsh of sihwa lake.