• 한국재료학회지
• /
• 제28권6호
• /
• pp.349-354
• /
• 2018

Particle size reduction is an important step in many technological operations. The process itself is defined as the mechanical breakdown of solids into smaller particles to increase the surface area and induce defects in solids, which are needed for subsequent operations such as chemical reactions. To fabricate nano-sized particles, several tens to hundreds of micron size ceramic beads, formed through high energy milling process, are required. To minimize the contamination effects during high-energy milling, the mechanical properties of zirconia beads are very important. Generally, the mechanical properties of $Y_2O_3$ stabilized tetragonal zirconia beads are closely related to the mechanism of phase change from tetragonal to monoclinic phase via external mechanical forces. Therefore, $Y_2O_3$ distribution in the sintered zirconia beads must also be closely related with the mechanical properties of the beads. In this work, commercially available $100{\mu}m-size$ beads are analyzed from the point of view of microstructure, composition homogeneity (especially for $Y_2O_3$), mechanical properties, and attrition rate.

• 한국미생물·생명공학회지
• /
• 제14권5호
• /
• pp.407-413
• /
• 1986

분쇄마찰매체에 의한 무증자 생전분의 효소당화촉진 mechanism을 전분의 구조적 측면을 중심으로 규명하였다. 당화촉진 효과를 줄 수 있는 수준의 분쇄마찰매체의 기계적 교반운동은 생전분의 미세결정구조(microcrystalline structure) 파괴는 물론 전분입자를 붕괴 (fragmentation) 시키는 효과도 없었다. 생전분 입자구조 변화의 중요한 특징은 입자구조의 팽윤(swelling) 현상으로써 팽윤된 전분은 보수능력이 2.5배 정도까지 증가되었다. 이와 같은 기계적 충격에 의한 전분입자의 팽윤현상은 가열호화에 의한 $\alpha$-전분화에 따른 팽윤현상가는 상이하였다. 생전분을 장시간 bead-milling하여 전처리하며 팽윤시킨 생전분은 당화가 촉진되었으나 bead와 효소를 동시에 첨가시킨 경우의 당화속도와 수율에는 미치지 못하였다. 분쇄마찰 반응계에서 효소를 첨가 무증자 전분을 당화시킬 경우에는 생전분입자 2시간 전후하여 수많은 입자로 fragmentation되었다. 생전분의 당화촉진 mechanism은 분쇄마찰매체에 의하여 전분입자가 균열팽윤되고 이 팽윤된 생전분은 보다 쉽게 효소작용을 받아 침식되며 이 침식된 전분입자는 분쇄마찰매체에 의하여 더욱 가속적으로 fragmentation되어 효소작용이 촉진된다고 판단된다. 옥수수, 감자, 고구마 등 각종 생전분은 그 종류에 따라 분쇄마찰 반응계를 활용한 무증자 당화에 많은 차이가 있었으며 이를 전분입자의 구조와 연결시켜 고찰하였다.

• 자원리싸이클링
• /
• 제11권4호
• /
• pp.3-10
• /
• 2002

핵연료 원료인 $UO_2$ 분말을 사용해 원자로에서 연소된 사용후 핵연료 소결체를 모의 제조하여 1회 산화ㆍ환원처리하여 분말로 만든 후, 건ㆍ습식 attrition 분쇄에 따른 분말의 특성 및 소결성을 조사하였다. 분쇄에 의한 분말의 평균입자크기는 건식분쇄의 경우에는 1 $mu extrm{m}$ 이하인 미분말이 쉽게 생성되었으나, 습식분쇄에서는 그 이상의 분말만이 생성되었다. 그리고 분쇄분말의 비표면적은 건식분쇄한 경우가 습식분쇄한 경우 보다 높았다. 분말의 미세구조는 건식분쇄에 의해서는 느슨한 응집체가 형성되었으며, 습식분쇄 분말은 압분성이 낮은 불규칙적이고 각진 입자형태를 나타내었다. 건식분쇄에 의해서 압분체 밀도는 크게 증가하며 소결체 요구 조건을 만족하는 이론밀도의 95%이상이 되고 평균 결정립 크기가 8 $\mu\textrm{m}$이상인 소결체를 얻을 수 있었다.

• Elastomers and Composites
• /
• 제51권2호
• /
• pp.128-137
• /
• 2016

The effect of the surface area of silicas on their reinforcing performance to styrene-butadiene rubber (SBR) compounds was systematically investigated. The feasibility of the Brunauer-Emmett-Teller surface area ($S_{BET}$) as a parameter representing the characteristics of the silicas was discussed compared to the mesopore volume, c value, oil absorption, and uptake of silane. The increase in $S_{BET}$ of silicas caused a considerable increase in Mooney viscosity, minimum torque, and hysteresis loss of the silica-filled SBR compounds, while significantly enhancing their abrasion property. These changes were explained by the attrition between the hydrophilic silica surface and the hydrophobic rubber chains. As expected, the change in $S_{BET}$ did not induce any remarkable changes in the cure, processing, tensile, and dynamic properties of the silica-filled SBR compounds because the crosslinking density of the rubber chains mainly determined these properties.

• 한국분말재료학회지
• /
• 제14권1호
• /
• pp.8-12
• /
• 2007

The effect of a CAM (Continuous Attrition Mill) treatment on the sinterability of ex-ADU $UO_2$ powder was investigated. As the cycles of a CAM increased, the apparent density, specific surface area and O/U of the milled powder increased, but there particle sizes decreased. However the sintered density of the $UO_2$ pellet decreased as the cycles of the CAM increased. It is considered that the decrease of the sintered density is due to the formation of $U_3O_8$, which was produced by a CAM mechanism.

• 한국결정성장학회:학술대회논문집
• /
• 한국결정성장학회 2000년도 Proceedings of 2000 International Nano Crystals/Ceramics Forum and International Symposium on Intermaterials
• /
• pp.151-163
• /
• 2000

A polymerized organic-inorganic complexation route is introduced for the synthesis of oxide ceramic powders. Polyvinyl alcohol was used as the organic carrier for precursor ceramic gel. Porous and soft powders, which have a high specific surface area, were obtained after calcinating the aerated precursors. The PVA content and its degree of polymerization had a significant influence on the homogeneity of the final powder. In particular, attrition milling process with the porous powder resulted in ultra-fine particles. In the case of the preparation of cordierite powder, nano-size powder, which has a high specific surface area of 181 ㎡/g, was obtained by the milling process. The complexation route was also applied to the synthesis of unstable phase in room temperature like beta-cristobalite, high temperature form of silica.

• 대한치과보철학회지
• /
• 제37권3호
• /
• pp.328-342
• /
• 1999

This study was performed to investigate the factors related to tooth wear. For this study, 78 patients with temporomandibular disorders and 76 dental students without any signs and symptoms of temporomandibular disorders were selected as the patients group and as the normal group, respectively. Preferred chewing side, Angle's classification, lateral guidance pattern, head and shoulder posture were observed clinically. Electromyographic activity of anterior temporalis and masseter muscle were recorded with $BioEMG^{(R)}$ and occlusal status were recorded with $T-Scan^{(R)}$. Wear facet area of each tooth was measured from working model of upper arch corresponding to the occlusal status from T-Scan. Wear facet area were measured with planimeter in $mm^2$. Total area were divided into incisal, canine, posterior tooth area. Anterior wearfacet area was incisor area plus canine area, and unilateral area was anterior area plus posterior area. The data collected were analyzed by SAS statistical program and the results of this study were as follows: 1. There was no significant difference between the two groups in total werafacet area, and male subjects showed tendency to have larger area in the normal group but female subjects showed tendency vice versa. 2. There was no significant difference related to preferred chewing side and Angle's classification, however some difference was observed by lateral guidance pattern. Anterior wear facet area in subjects of canine guidance was the largest in the three subgroups. 3. Subjects with head tilting to right side had larger posterior and total area, and subjects with higher shoulder in right side had larger canine and anterior area than any other subgrous. 4. Electromyographic activity of masseter muscle was more correlated with wear facet area than anterior temporalis muscle, and tooth contact number and force were significantly correlated with wear facet area, but the most important factor affecting tooth attrition was age.

• 오토저널
• /
• 제15권3호
• /
• pp.120-125
• /
• 1993

The surface roughness of workpiece is reduced during spark-out. The reduction of roughness is a benefit of spark-out, but spark-out lowers productivity. The characteristics of spark-out are different to those of plunge grinding to which feed is applied. This difference is due to overlapping cutting during spark-out. Effect of spark-out is in proportion to volume of grain wear. This phenomenon is due to different overlapping area. Dressing interval can be enlarged by spark-out, when volume of grain wear is large. In this study, the characteristic of spark-out was studied by spark-out obserbation in various grinding conditions. For this purpose thrust force, spark-out time and surface roughness of workpiece were experimentally investigated in various grinding conditions.

• Journal of the Korean Statistical Society
• /
• 제6권1호
• /
• pp.65-76
• /
• 1977

The relative importance of single-shot kill probabilities, rates of fire, weapon allocation strategies, and the size of initial force in warfare between two force with heterogeneous multiple weapon systems are considered by examining their effect on a natural measure of effectiveness, the expected number of survivors. Attrition equations are derived via stochastic formulation to represent the mean course of battle having an underlying probability distribution. It is assumed that each side uses indirect area fires. Level of intelligence activities are reflected in the availability of spontaneous information on the current enemy status. Depending on the availability of the information on the current enemy status, each participatory unit may follow 1) a prescribed attack pattern (fraction of the available units assigned to various enemy targets) or 2) an adaptive attack pattern depending on the enemy status at that time. Conditions for possible stalemate are discussed.

• 한국분말재료학회지
• /
• 제23권1호
• /
• pp.54-60
• /
• 2016

This study focuses on fabricating silver flake powder by a mechanical milling process and investigating the formation of flake-shaped particles during milling. The silver flake powder is fabricated by varying the mechanical milling parameters such as the amount of powder, ball size, impeller rotation speed, and milling time of the attrition ballmill. The particle size of the silver flake powder decreases with increasing amount of powder; however, it increases with increasing impeller rotation speed. The change in the particle size of the silver flake powder is analyzed based on elastic collision between the balls, taking energy loss of the balls due to the powder into consideration. The change in the particle size of the silver flake powder with mechanical milling parameters is consistent with the change in the diameter of the elastic deformation contact area of the ball, due to the collision between the balls, with milling parameters. The flake-shaped silver particles are formed at the elastic deformation contact area of the ball due to the collision.