• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.49 no.7
• /
• pp.573-580
• /
• 2021

Paraffin wax is attracting many attentions for promising solid fuel of hybrid rocket because of its higher regression than other fuels. However, even with paraffin fuel combustion, unsteady low-frequency oscillation of combustion pressure is still observed. And, this is related to the formation of liquid layer and the entrainment of fuel droplets entering the axial combustion gas flow. This study investigates the effect of additional combustion of fuel droplets on the occurrence of low-frequency combustion instability. On the other hand, the formation of fuel droplets depends on Weber Number (the ratio of the inertial force to the surface tension of the liquid) and Reynolds Number of the oxidizer flow. Therefore, a laboratory-scale hybrid rocket was used to monitor the occurrence of combustion instability while changing We number. A series of combustion tests were conducted to control We number by changing the oxidizer flow rate or adding LDPE (low density polyethylene) to base fuel. In the results, it was confirmed that there is a critical We number above which the low-frequency combustion instability occurs.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.37 no.1
• /
• pp.106-111
• /
• 2024

A triboelectric nanogenerator is a promising energy harvester operated by the combined mechanism of electrostatic induction and contact electrification. It has attracting attention as eco-friendly and sustainable energy generators by harvesting wasting mechanical energies. However, the power generated in the natural environment is accompanied by low frequencies, so that the output power under such input conditions is normally insufficient amount for a variety of industrial applications. In this study, we introduce a non-contact rotational triboelectric nanogenerator using pedaling and gear systems (called by P-TENG), which has a mechanism that produces high power by using rack gear and pinion gear when a large force by a pedal is given. We design the system can rotate the shaft to which the rotor is connected through the conversion of vertical motion to rotational motion between the rack gear and the pinion gear. Furthermore, the system controls the one directional rotation due to the engagement rotation of the two pinion gears and the one-way needle roller bearing. The TENG with a 2 mm gap between the rotor and the stator produces about the power of 200 ㎼ and turns on 82 LEDs under the condition of 800 rpm. We expect that P-TENG can be used in a variety of applications such as operating portable electronics or sterilizing contaminated water.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.44 no.2
• /
• pp.133-139
• /
• 2024

The purpose of this study is to propose a new material called polyketone to overcome the limitations of polyurethane, which is currently used as a compression member in the field of earthquake-resistant structures. Although existing polyurethane has excellent elastic properties, it tends to be insufficient to recover the displacement that occurs in the structure. On the other hand, polyketone has excellent strength performance and is attracting attention as an eco-friendly material. In order to evaluate the compression properties of polyketone, which has these advantages, we would like to conduct a comparative experiment with polyurethane that was previously used. The speed dependence of polyketone was identified through simple compression experiments and experimental speed changes under repeated loading conditions, and additional compression behavior was applied to confirm compression behavior characteristics. Polyketone showed compressive strength about 10 times higher than that of polyurethane, and its excellent recovery characteristics were demonstrated by its deformation recovery ability about 14 times higher at relatively small displacements.

• Journal of the Korean Regional Science Association
• /
• v.15 no.2
• /
• pp.155-187
• /
• 1999

The East Asian Region has experienced remarkable economic growth and transformation of interurban networking over the past three decades, and urban competiti veness for a networking hub in this region has become a critical issue confronting cities. Competitiveness of the Seoul capital region for a networking hub in Northeast Asia is outstripped by other competing cities in East Asia, notwithstanding its geo-politically and geo-economically advantageous location in this region. In this paper, we aim to appraise the Seoul capital region's competitiveness in terms of logistics distribution, financial function and logistics distribution, financial function and agglomeration of transnational corporations (especially of RHOs and other managerial functions), and to advance the networking strategies of the region for a Northeast Asia hyb. As a result of analysis, we suggest that the Seoul capital region be developed as a Northeast Asian center for regional headquarters or leading global corporations and financial services for being a strategic nodal point in Northeast Asia in the 21st century. A recent survey shows that where to locate an RHQ is influenced by various factors, such as potential market and manufacturing site in the city's hinterland, quality of life, such things as culture, health, safety, education, a well-educated, English-speaking population, reliable air transport, state-of-the-art communications, and an active policy to offer foreign companies generous incentives. The Seoul capital region, which is located at a strategic nodal point advantageous as a springboard for its Northeast Asian hinterland, cannot meet the other conditions mentioned above. To overcome these drawbacks in attracting transnational capital and to create competitiveness as a strategic hub of RHQs in Northeast Asia, it is urgent to initiate a structural reform of the Korean economy, politics, and overall society, to minimize the regulation of FDI, and to provide various incentives for foreign investment. Moreover, we propose the construction of an 'International Business Town' in the Seoul capital region, as a medium to intermediate these strategies and to shape them in a spatial scale. The projected 'International Business Town(IBT)' will be a 'free city' open to international business in which liberal economic activities are guaranteed by special legislation and administration, infrastructures needed for international and improved accessibility to the airport are furnished, and the preference of foreign high-income investors for cultural and living environment are satisfactorily met. IBT is conspicuously differentiated from a raft of other cities' incentives in that it combines deregulation and incentive programs to attract the investment of transnational capital, with a spatial program of offering an urban environment preferred by the high-income investors for cultural and living environment are satisfactorily met. IBT is conspicuously differentiated from a raft of other cities' incentives in that it combines deregulation and incentive programs to attract the investment of transnational capita, with a spatial program of offering an urban environment preferred by the high-income and managerial class. Furthermore, it can be an excellent way of overcoming the xenophobia that has spread among the Korean population by concentrating foreign businesses and their lifestyles in a specific foreign businesses and their lifestyles in a specific zone. In conclusion, 'International Business Town', in line with other legislative and administrative incentive programs, will function as a driving force to make the Seoul capital regional more competitive as a regional business hub in Northeast Asia.

• Journal of Soil and Groundwater Environment
• /
• v.11 no.6
• /
• pp.61-68
• /
• 2006

Soil washing techniques coupled with high pressure air jet were applied for diesel-contaminated soils sampled by an underground oil reservoir of which the initial total petroleum hydrocarbon (TPH) ($2,828{\pm}206\;mg/kg$) exceeded 5 times of current standard level (500 mg/kg) regulated by the Soil-Environment Conservation Law. Through several tests, we found that the position of impeller has a critical impact for washing efficiencies. The highest washing efficiency was obtained at an oblique angle (30 degree) for the impeller and optimized mixing speed (300 rpm) that could have high shearing forces. Considered economical and feasible aspects, the optimum mixing time was 10 min. Rate constants of TPH removal derived from the first-order equation were not linearly increased as mixing speed increased, indicating that mechanical mixing has some limits to enhance the washing efficiencies. Application of high-pressure air jet in washing process increased the washing efficiency. This increase might be caused by the fact that the surface of micro-air bubbles strongly attached hydrophobic matters of soil particles. As the pressure of air jet increased, the separation efficiencies of TPH-contaminated soil particles increased. In the combined process of high-pressure air jet and mixing by impeller, the optimum mixing speed and air flow-rate were determined to be 60 rpm and $2\;kg/cm^2$, respectively. Consequently, the washing technique coupled with high-pressure air jet could be considered as a feasible application for remediating petroleum-contaminated soils.

• Convergence Security Journal
• /
• v.18 no.1
• /
• pp.117-128
• /
• 2018

The purpose of this paper is to analyze the behavior of North Korea's cyber attack against South Korea since 2009 based on major international security theories and suggest South Korea's policy option. For this purpose, this paper applied the behavioral domain and characteristics of 'cyber power' and 'coercion dynamics' model, which are attracting attention in international security studies. The types of cyber attacks from North Korea are classified into the following categories: power-based incarceration, leadership attacks and intrusions, military operations interference, and social anxiety and confusion. In terms of types and means of cyber power, North Korean GPS disturbance, the Ministry of Defense server hacking and EMP are hard power with high retaliation and threat and cyber money cashing and ransomware are analyzed by force in the act of persuasion and incentive in the point of robbing or asking for a large amount of money with software pawns. North Korea 's cyber attack has the character of escape from realistic sanctions based on the second nuclear test. It is important for South Korea to clearly recognize that the aggressive cyberpower of North Korea is changing in its methods and capabilities, and to ensure that North Korea's actions result in far greater losses than can be achieved. To do this, it is necessary to strengthen the cyber security and competence to simultaneously attack and defend through institutional supplement and new establishment such as cyber psychological warfare, EMP attack preparation, and enhancement of security expertise against hacking.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.12
• /
• pp.1-9
• /
• 2020

As pet dogs rapidly increase in number, abandoned and lost dogs are also increasing in number. In Korea, animal registration has been in force since 2014, but the registration rate is not high owing to safety and effectiveness issues. Biometrics is attracting attention as an alternative. In order to increase the recognition rate from biometrics, it is necessary to collect biometric images in the same form as much as possible-from the face. This paper proposes a method to determine whether a dog is facing front or not in a real-time video. The proposed method detects the dog's eyes and nose using deep learning, and extracts five types of directional face information through the relative size and position of the detected face. Then, a machine learning classifier determines whether the dog is facing front or not. We used 2,000 dog images for learning, verification, and testing. YOLOv3 and YOLOv4 were used to detect the eyes and nose, and Multi-layer Perceptron (MLP), Random Forest (RF), and the Support Vector Machine (SVM) were used as classifiers. When YOLOv4 and the RF classifier were used with all five types of the proposed face orientation information, the face recognition rate was best, at 95.25%, and we found that real-time processing is possible.

• Journal of Space Technology and Applications
• /
• v.3 no.2
• /
• pp.118-143
• /
• 2023

Space is becoming more commercialized. Despite of its delayed start-up, space activities in Korea are attracting more nation-wide supports from both investors and government. May 25, 2023, KSLV II, also called Nuri, successfully transported, and inserted seven satellites to a sun-synchronous orbit of 550 km altitude. However, Starlink has over 4,000 satellites around this altitude for its commercial activities. Hence, it is necessary for us to constantly monitor the collision risks of these satellites against resident space objects including Starlink. Here we report a quantitative research output regarding the conjunctions, particularly between the Nuri satellites and Starlink. Our calculation shows that, on average, three times everyday, the Nuri satellites encounter Starlink within 1 km distance with the probability of collision higher than 1.0E-5. A comparative study with KOMPSAT-5, also called Arirang-5, shows that its distance of closest approach distribution significantly differs from those of Nuri satellites. We also report a quantitative analysis of collision-avoiding maneuver cost of Starlink satellites and a strategy for Korea, being a delayed starter, to speed up to position itself in the space leading countries. We used the AstroOne program for analyses and compared its output with that of Socrates Plus of Celestrak. The two line element data was used for computation.

• Journal of Intelligence and Information Systems
• /
• v.27 no.2
• /
• pp.55-78
• /
• 2021

Tosolve complex and diverse social problems and ensure the quality of life of individuals, social robots that can interact with humans are attracting attention. In the past, robots were recognized as beings that provide labor force as they put into industrial sites on behalf of humans. However, the concept of today's robot has been extended to social robots that coexist with humans and enable social interaction with the advent of Smart technology, which is considered an important driver in most industries. Specifically, there are service robots that respond to customers, the robots that have the purpose of edutainment, and the emotionalrobots that can interact with humans intimately. However, popularization of robots is not felt despite the current information environment in the modern ICT service environment and the 4th industrial revolution. Considering social interaction with users which is an important function of social robots, not only the technology of the robots but also other factors should be considered. The design elements of the robot are more important than other factors tomake consumers purchase essentially a social robot. In fact, existing studies on social robots are at the level of proposing "robot development methodology" or testing the effects provided by social robots to users in pieces. On the other hand, consumer emotions felt from the robot's appearance has an important influence in the process of forming user's perception, reasoning, evaluation and expectation. Furthermore, it can affect attitude toward robots and good feeling and performance reasoning, etc. Therefore, this study aims to verify the effect of appearance of social robot and consumer emotions on consumer's attitude toward social robot. At this time, a social robot design evaluation model is constructed by combining heterogeneous data from different sources. Specifically, the three quantitative indicator data for the appearance of social robots from the ABOT Database is included in the model. The consumer emotions of social robot design has been collected through (1) the existing design evaluation literature and (2) online buzzsuch as product reviews and blogs, (3) qualitative interviews for social robot design. Later, we collected the score of consumer emotions and attitudes toward various social robots through a large-scale consumer survey. First, we have derived the six major dimensions of consumer emotions for 23 pieces of detailed emotions through dimension reduction methodology. Then, statistical analysis was performed to verify the effect of derived consumer emotionson attitude toward social robots. Finally, the moderated regression analysis was performed to verify the effect of quantitatively collected indicators of social robot appearance on the relationship between consumer emotions and attitudes toward social robots. Interestingly, several significant moderation effects were identified, these effects are visualized with two-way interaction effect to interpret them from multidisciplinary perspectives. This study has theoretical contributions from the perspective of empirically verifying all stages from technical properties to consumer's emotion and attitudes toward social robots by linking the data from heterogeneous sources. It has practical significance that the result helps to develop the design guidelines based on consumer emotions in the design stage of social robot development.