• 한국전자통신학회논문지
• /
• 제15권6호
• /
• pp.987-994
• /
• 2020

본 논문은 음향잡음감쇠기에서 CNN(: Convolutional Neural Network) 계층의 커널 사이즈가 성능에 미치는 영향을 위한 연구하였다 이 시스템은 기존의 적응필터를 이용하는 대신 신경망 적응예측필터를 이용한 심층학습 알고리즘으로 잡음감쇠 성능을 개선한다. 100-neuron, 16-filter CNN 필터와 오차 역전파(back propagation) 알고리즘을 이용하여 잡음이 포함된 단일입력 음성신호로부터 음성을 추정한다. 이는 음성신호가 갖는 유성음 구간에서의 준주기적 성질을 이용하는 것이다. 본 연구에서 커널 사이즈에 대한 잡음감쇠기의 성능을 검증하기 위하여 Tensorflow와 Keras 라이브러리를 사용한 시뮬레이션 프로그램을 작성하고 모의실험을 수행하였다. 모의실험 결과, 커널 사이즈가 16 정도일 때 평균자승오차(MSE: Mean Square Error) 및 평균절대값오차(MAE: Mean Absolute Error) 값이 가장 작은 것으로 나타났으며 사이즈가 이보다 더 작거나 커지면 MSE 및 MAE 값이 증가하는 것을 볼 수 있다. 이는 음성신호의 경우 커널 사이즈가 16 정도일 때 특성을 가장 잘 포집할 수 있음을 알 수 있다.

• 한국전자통신학회논문지
• /
• 제18권1호
• /
• pp.71-76
• /
• 2023

본 논문은 음향잡음감쇠기에서 신경망 구조의 Wiener 필터를 이용하여 비선형 잡음을 감쇠시키는 방법에 대하여 연구하였다. 이 시스템은 기존의 적응필터를 이용하는 대신 신경망 위너필터를 이용한 심층학습 알고리즘으로 비선형 잡음감쇠 성능을 개선한다. 128-neuron, 8-neuron 은닉층과 오차 역전파(back propagation) 알고리즘을 이용하여 비선형 잡음이 포함된 단일입력 음성신호로부터 음성을 추정한다. 본 연구에서 비선형 잡음에 대한 감쇠 성능을 검증하기 위하여 Keras 라이브러리를 사용한 시뮬레이션 프로그램을 작성하고 모의실험을 수행하였다. 모의실험 결과, 본 시스템은 비선형 잡음이 포함되어 있는 경우에도 위너필터 대신 FNN 필터를 사용하면 잡음감쇠 성능이 상당히 개선되는 것을 볼 수 있다. 이는 FNN 필터의 복잡한 구조가 어떤 형태의 비선형 특성도 잘 표현하기 때문이다.

• International Journal of Automotive Technology
• /
• 제6권1호
• /
• pp.65-70
• /
• 2005

Pressure ripples, which are inevitably generated by a fluctuation of flow rate caused by a pump mechanism, include noises and vibrations in hydraulic pipeline. These noises and vibration deteriorate the stability and accuracy of hydraulic systems. The accumulator and hydraulic attenuator are normally used to reduce the pressure ripples. In this study, a parallel line is introduced to the hydraulic pipeline for the hydraulic system with a bent-axis piston pump as a method to reduce the pressure ripples. The dynamic characteristics of the hydraulic pipeline with a parallel line are analyzed by a transfer matrix in the frequency domain. The usefulness of the hydraulic pipeline with a parallel line was ascertained by experiment and simulation. The results from the experiment and simulation show that the hydraulic pipeline with a parallel line were effective in reducing the pressure ripples.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2004년도 하계종합학술대회 논문집(1)
• /
• pp.321-324
• /
• 2004

In this paper, attenuation characteristics of silica-based variable optical attenuator (VOA) with heat insulating structures are investigated by variations of structural parameters and heating power at wavelength 1.55${\mu}m$. The characteristics of power dissipation and attenuation at this VOA was optimized in terms of heating insulating width, under-cladding height and over-cladding height. The optimized maximum attenuation of this VOA was achieved about 31dB at heating power 150mW.

• ETRI Journal
• /
• 제30권5호
• /
• pp.744-746
• /
• 2008

This letter presents a crosstalk-enhanced polymer thermo-optic digital optical switch operating at a low power consumption. Modified radiation-type attenuators are integrated in a series with a conventional $1{\times}2$ digital optical switch. A low optical crosstalk of less than -45 dB is attained at a low applied switching power of 60 mW, and an insertion loss of about 1.1 dB is exhibited.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2003년도 춘계종합학술대회
• /
• pp.586-589
• /
• 2003

Repeater is developed. Based on the systems The up-converter of the WCDMA Digital Optic pecifications, the structure of the up-converter is accomplished and its block diagram is drawn. The up-converter is implemented according to these block diagrams. Subsequently the low pass filter, the automatic level controlled attenuator, the frequency synthesizer and other components for the up-converter are designed and implemented, and a main board to integrate these modules is also manufactured. To reduce the noise floor of system and suppress the RF spurious noise, a PCB layout is performed carefully. For each module consisting of the up-converter and the entire system, the performance tests are accomplished to check the performance about the specifications.

• 펄프종이기술
• /
• 제35권5호
• /
• pp.37-45
• /
• 2003

To investigate the influence of the design and operating parameters of the headbox on hydrodynamics, a pilot headbox system and pressure monitoring apparatus were constructed. The pilot headbox system consisted of a circulating water reservoir, centrifugal pump, distributor, turbulence generator and slice. The distributor was designed to function as a pressure attenuator. Flow rate to the headbox and MD and CD velocity profiles in the slice zone were monitored using an ultrasonic flowmeter and Pitot tubes, respectively. As the distance from the step diffusor increased, evener CD velocity profile was observed. Wall effect increased with the increase of the velocity. Flow stability in the headbox was evaluated by injecting a dye at the outlet of the distributor. Application of theoretical analysis based on CFD in designing headboxes is briefly discussed.

• 한국반도체및디스플레이장비학회:학술대회논문집
• /
• 한국반도체및디스플레이장비학회 2006년도 추계학술대회 발표 논문집
• /
• pp.150-153
• /
• 2006

Micro vibration isolation, typically originated from ground, is always a prime concern for the nano-measurement instruments such as Atomic Force Microscopes. A four mount active vibration isolation system is proposed in this paper. Modeling and control of such a four mount system as analyzed. Combined active-passive isolation principle is used for vibration isolation by mounting the instrument on a passively damped isolation system made of Elastomer along with the active stage in parallel that consists of very soft actuation system, the Voice Coil Motor. The active stage works in combination with the passive stage for working as a very low frequency vibration attenuator.

• 한국항해학회지
• /
• 제25권4호
• /
• pp.455-460
• /
• 2001

본 연구에서는 방향성 결합기의 특성과 PIN다이오드의 특성을 이용하여 가변 감쇠기를 구현하였다. 기존의 Even-Odd Mode해석법이 아닌 간단한 2-port 기법으로 감쇠기를 분석하였으며, 산란 파라미터는 결합포트의 종단 임피던스가 동일한 경우와 동일하지 않은 경우에 있어서의 감쇠기의 동작특성을 평가하였다. 방향성 결합기의 결합포트는 가변종단을 HP사의 전류제어 소자인 HSMP-3864 PIN다이오드를 사용하였다. 구현된 가변감쇠기는 PCS 송신주파수 1.9 GHz에서 감쇠 범위가 30 dB 이상, 삽입손실 5 dB 이하, 입·출력 반사계수 -25 dB 이하의 특성을 나타내었으며, 이는 PCS와 셀룰러 이동통신 기지국용 전력 증폭기를 온도 등과 같은 외부의 환경변화에 따라서 이득을 가변 시킬 수 있으며, 또한 증폭기의 선형성을 향상시킬 것으로 사료된다.

• 한국소음진동공학회논문집
• /
• 제14권11호
• /
• pp.1123-1128
• /
• 2004

An experimental study on firing noise of K2 rifle was performed. Firing noises of K2 rifle were measured at close distance to rifle. Firing noise of K2 rifle which made in Korea, has not measured before. The measurement of firing noise at close distance is not simple, because the amplitude of firing noise is much bigger than the measuring limit of ordinary sound level meter even though it uses a signal attenuator. The measurement of firing noise at close distance is necessary for noise source positioning and for obtaining the sound power of K2 rifle. By this experimental study, the firing noise levels of K2 rifle at different positions are obtained and these data can be used to Predict the sound pressure level at any distance from muzzle of the rifle. Also these data can be used to calculate the threshold shift of gunner's ear.