• 한국감성과학회:학술대회논문집
• /
• 한국감성과학회 2001년도 추계학술대회 논문집
• /
• pp.233-238
• /
• 2001

The mechanism design of the interactive emotional robot has been carried out. The two-wheeled inverted pendulum type mechanism was adopted to improve the mobility and make the innate clumsy monoaxial bicycle motion. Even though the system is unstable in itself, it is expected for the robot to move freely in a plane, keeping the upright position only with two wheels. Two motors attached on head can make 4 motion sets, and two motors on the wheels can make 8. Therefore, 32 independent motion sets can be achieved from the robot to communicate the emotions with humans. The motion's equation of the robot was derived based on nonholonomic dynamics, and the necessary power to the wheel's rotational axis was found by simulation.

• 수산해양기술연구
• /
• 제41권3호
• /
• pp.222-226
• /
• 2005

A series of model tests carried out at the CWC of WJFEL for the purpose of prediction of resistance for the performance and improvement of resistance by attaching appendage for the ship of 50 knots class planing hull. The resistance performance evaluation has been carried out for the bare hull and for the appendage hull with two different depth of vertical type wedges. In the bare model test, trim and sinkage is calculated for the planing hull and the resistance is calculated. For minimizing the resistance, wedge appendage is attached and tested. Analysis and tests shows that for a 12.5mm wedge, resistance is minimum and overall power tallied to 5636ps.

• 한국미생물·생명공학회지
• /
• 제21권2호
• /
• pp.176-180
• /
• 1993

Survival and heat resistance of Listeria monocytogenes Scott A in various nutritional environments and cell type on stainless steel were determined. Viable cell of L. monocytogenes Scott A was most rapidly decreased in phosphate buffer among various media such as NSM (30 g TSB/1 l D.W.), LNM (2 g TSB/1 l D.W.) and phosphate buffer (pH=7) during incubation at 21 and 35C but survived for 15 days at 21C. Vegetative and starved L. monocytogenes Scott A were survived after heat treatment for 5 min at 65C while not detected at 72C.

• 한국의류학회지
• /
• 제28권7호
• /
• pp.1029-1036
• /
• 2004

The fragrant fabrics were prepared by treatment with eucalyptus microcapsules. 100% cotton fabric, 100% polyester fabric and 100% wool fabric were used as test specimens. Using pad-dry-cure method, microcapsules were attached on each specimen by acrylic binder under conditions of varying concentration. Surface property, stiffness, and air permeability of fragrant fabrics were evaluated. As increasing concentration of binder, add-on yield was increased. Add-on yield was decreased with increasing laundering cycle, especially in polyester fabric. As the concentration of binder was increased, the properties of stiffness and air permeability were decreased. Also it fumed out that pad-dry-cure method was not suitable to polyester fabric.

• Journal of Biosystems Engineering
• /
• 제16권1호
• /
• pp.9-17
• /
• 1991

A dynamometer was designed and constructed to measure three directional forces and moments of pull type implement with eliminating the interference between the forces. The dynamometer consists of a linear motion bearing, self-aligning bearings, universal joints, and cantilevers where strain gages were attached. A data acuquisition system was developed to collect data and to analyze them. The data acuquisition system consists of the dynamometer, a potentiometer to measure the implement depth, strain amplifiers, a A/D converter, and an IBM-AT compatible microcomputer. Program, written in C language, was developed to read data from tranducers with given interval, to calculate forces and moments, to display them on screen, and to store them on disk. The calibration results showed that cantilevers had good linearity and there was no interference among directional forces. When applied loads were reduced with constant rate, hysteresis was appeared on the dynamometer. It might to be reduced by using ball bearings instead of self-aligning bearings.

• EDISON SW 활용 경진대회 논문집
• /
• 제4회(2015년)
• /
• pp.535-537
• /
• 2015

We present selfie stick case design, which can protect upper part of Selfie Stick. Many of current products are damaged when it is carried without cases, especially upper part of the product, because protection case is irrelevant to handle in urgent or frequent use of the product. To solve this problem, we design the case part which is attached to stick. For designing the part, we considered functionality, aesthetics, portability and profitability.

• 대한가정학회지
• /
• 제48권2호
• /
• pp.23-38
• /
• 2010

The objectives of this study were 1) to classify survey respondents according to vanity scales, and 2) to identify price attitude among the classified groups. The participants were 276 university students who were residents in Seoul. Data were analyzed by factor analysis, cluster analysis, and one-way ANOVA. The vanity scales consisted of four factors; physical concern, physical view, achievement concern and achievement view. Based on these four factors, the respondents were classified into three clusters(interested, vain, and self-confident) as an attached group name. There were significant differences in the dimensions of materialism, price attitude and store choice behavior among the clusters. Marketing implications are discussed.

• 한국전기전자재료학회논문지
• /
• 제16권1호
• /
• pp.70-76
• /
• 2003

For the development of superconducting power apparatus, it is necessary to establish the dielectric technology in coolant like L$N_2$. Therefore in this paper we conducted experiment of surface flashover that could occur in the windings of HTS transformer which will be developed in the pancake coil type. First, we distinguished two types of surface flashover by electrode alignment, such as parallel and vertical, and then compared with each characteristics of surface flashover. The flashover voltage was more affected by thickness of spacer than by surface length when the thickness of spacer is over 1 mm. And the surface flashover with metallic particle attached on the spacer was tested, it was affected by the particle position. The more close to the electrodes, the worse the characteristics. Also the experiment was conducted when the electrode was immersed in liquid nitrogen(L$N_2$) partially. The surface flashover characteristics of spacer was, when immersed partially in 50%, rapidly decreased.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1994년도 하계학술대회 논문집 A
• /
• pp.226-228
• /
• 1994

In this paper, a moving iron core type LOA is designed and analyzed electro-magnetically and is applied to the active control of structural vibration as an active mass driver. Structural vibration is sensored by the accelerometer attached the structure and reduced by the optimally controlled motion of active mass of LOA giving anti-phase inertia farce to the structure. As a result, the basement of the application of LOA as an active mass driver is successfully established.

• Journal of Magnetics
• /
• 제18권4호
• /
• pp.473-480
• /
• 2013

A new concept design of electromagnetic energy harvester is proposed for powering a tire pressure monitoring sensor (TPMS). The thin coil strap is attached on the circumferential surface of a rim and a permanent magnet is placed on the brake caliper system. When the wheel rotates, the relative motion between the magnet and the coil generates electrical energy by electromagnetic induction. The generated energy is stored in a storage unit (rechargeable battery, capacitor) and used for TPMS operation and wireless signal transmission. Innovative layered design of the strap is provided for maximizing energy generation. Finite Element Method (FEM) and experiment results on the proposed design are compared to validate the proposed design; further, the method for design improvement is discussed. The proposed design is excellent in terms of durability and sustainability because it utilizes the everlasting rotary motion throughout the vehicle life and does not require material deformation.