• 한국표면공학회지
• /
• 제41권5호
• /
• pp.220-225
• /
• 2008

In this study, two kinds of Fe-based bulk metallic glasses (BMG) powder were built-up through atmospheric plasma spray (APS) technique. The microstructure of two coatings was analyzed through X-ray diffraction, scanning electron microscopy and transmission electron microscopy. Crystallization and oxidation in coatings were affected by chemical composition and initial powder size. Then, both of them influenced the tribological property.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제10권3호
• /
• pp.1182-1194
• /
• 2016

The single image dehazing algorithm in existence can satisfy the demand only for improving either the effectiveness or efficiency. In order to solve the problem, a novel variational framework for single image dehazing based on restoration is proposed. Firstly, the initial atmospheric scattering model is transformed to meet the kimmel's Retinex variational model. Then, the green light component of image is considered as an input of the variational framework, which is generated by the sensitivity of green wavelength. Finally, the atmospheric transmission map is achieved by multi-resolution pyramid reduction to improve the visual effect of the results. Experimental results demonstrate that the proposed method can remove haze effectively with less memory consumption.

• 한국전자파학회논문지
• /
• 제15권1호
• /
• pp.29-35
• /
• 2004

광 펄스가 대기 공간을 통해 전파될 때, 광 펄스는 대기 교란으로 인해 감쇠되고 퍼지게 되며, 이러한 펄스 퍼짐은 광 수신단에서 도착되는 펄스의 요동으로 인해 발생한다. 디지털 광통신에서는 감쇠도 중요한 인자이지만 펄스 퍼짐이 더 중요한 인자로 작용한다. 이에, 본 논문에서는 교란 대기를 통해 전파되는 광 펄스의 퍼짐을 구하고, 이러한 펄스 퍼짐을 대기 교란 상수인 굴절률 구조함수로 나타내고 대기 교란 상태와 전송거리에 따른 펄스 퍼짐 정도를 시뮬레이션 하였다.

• Ocean and Polar Research
• /
• 제26권3호
• /
• pp.439-451
• /
• 2004

Total solar irradiance (750), total UV irradiunce (TUV) and erythemal UV irradiance (EUV) measured at King Sejong station $(62.22^{\circ}S,\;58.78^{\circ}W)$ in west Antarctica have been used together with total ozone, cloud amount and snow cover to examine the effects of ozone, cloud and snow surface on these surface solar inadiunce over the period of 1998-2003. The data of three solar components for each scan were grouped by cloud amount, n in oktas $(0{\leq}n<3,\;3{\leq}n<4,\;4{\leq}n<5,\;5{\leq}n<6,\;6{\leq}n<7\;and\;7{\leq}n<8)$ and plotted against solar zenith angle (SZA) over the range of $45^{\circ}\;to\;75^{\circ}$. The radiation amplification factor (RAE) is used to quantify ozone effect on EUV. RAF of EUV decreases from 1.51 to 0.94 under clear skies but increases from 0.94 to 1.85 under cloudy skies as SZA increases, and decreases from 1.51 to 1.01 as cloud amount increases. The effects of cloud amount and snow surface on EUV are estimated as a function of SZA and cloud amount after normalization of the data to the reference total ozone of 300 DU. In order to analyse the transmission of solar radiation by cloud, regression analyses have been performed for the maximum values of solar irradiance on clear sky conditions $(0{\leq}n<3)$ and the mean values on cloudy conditions, respectively. The maximum regression values for the clear sky cases were taken to represent minimum aerosol conditions fur the site and thus appropriate for use as a normalization (reference) factor for the other regressions. The overall features for the transmission of the three solar components show a relatively high values around SZAs of $55^{\circ}\;and\;60^{\circ}$ under all sky conditions and cloud amounts $4{\leq}n<5$ and $5{\leq}n<6$. The transmission is, in general, the largest in TUV and the smallest in EUV among the three components of the solar irradiance. If the ground is covered with snow on partly cloudy days $(6{\leq}n<7)$, EUV increases by 20 to 26% compared to snow-free surface around SZA $60^{\circ}-65^{\circ}$, due to multiple reflections and scattering between the surface and the clouds. The relative difference between snow surface and snow-free surface slowly increases from 9% to 20% as total ozone increases from 100 DU to 400 DU under partly cloud conditions $(3{\leq}n<6)$ at SZA $60^{\circ}$. The snow effects on TUV and TSO are relatively high with 32% and 34%, respectively, under clear sky conditions, while the effects changes to 36% and 20% for TUV and TSO, respectively, as cloud amount increases.

• 대한원격탐사학회지
• /
• 제38권6_1호
• /
• pp.1423-1444
• /
• 2022

본 연구에서는 대기 및 지표면 인자들에 대한 중적외 파장역의 복사휘도의 민감도를 복사전달모델인 MODerate resolution atmospheric TRANsmission (MODTRAN)6을 이용하여 분석하고 이를 이용하여 야간에 중적외 파장역 만을 이용한 지표면온도 산출 가능성을 평가하였다. 이를 기반으로 야간에 대해 다양한 조건을 반영한 지표면온도 산출식을 개발하고 처방 온도 자료와 현장 관측 자료를 이용하여 개발된 지표면온도 산출식의 수준을 평가하였다. 중적외 파장역을 활용한 위성 원격탐사에 주로 영향을 미치는 대기연직구조, 이산화탄소와 오존, 지표면온도의 일 변동, 지표면 방출률 그리고 위성의 관측각에 대해 민감도 실험을 실시하였다. 이때 분리대기창 기법 활용 가능성을 평가하기 위해 중적외 파장역을 투과율을 근거로 2개의 밴드로 분리한 후 민감도를 분석한 결과 밴드와 관계없이 대기연직구조에 가장 큰 영향을 받으며 지표면 방출률, 지표면온도의 일 변동, 위성의 관측각 순으로 영향을 받았다. 주요 변인 실험 모두에서 대기의 창에 해당되는 밴드 1은 민감도가 낮은 반면 오존과 수증기 흡수가 포함된 밴드 2에서는 민감도가 높아서 분리대기창 기법을 활용하여 지표면온도 산출이 가능할 것으로 판단하였다. 중적외 2개 밴드와 다양한 변인들을 이용하여 개발된 지표면온도 산출식은 복사모의 시 입력된 기준 지표면온도와 상관계수, 편의 그리고 root mean squared error (RMSE)가 각각 0.999, 0.023K과 0.437K의 수준을 보였다. 또한 26개의 현장관측 지표면온도 자료로 검증한 결과 상관계수는 0.993, 편의는 1.875K, RMSE는 2.079K을 보였다. 본 연구의 결과는 대기 및 지표면 조건이 야간의 중적외 두 밴드에 미치는 영향이 다른 특성을 이용하여 지표면온도를 산출할 수 있음을 제시한다. 따라서 향후에는 중적외 파장역 센서를 탑재한 위성자료를 이용하여 지표면온도를 산출하고 그 수준을 평가해 볼 필요가 있다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 제37회 하계학술대회 논문집 A
• /
• pp.309-310
• /
• 2006

The considerations for remaining life of ACSR (Aluminum Stranded Conductors Steel Reinforced) in transmission lines has become gradually important to hold reliability and stability of power supply. The remaining life of ACSR exposed to the atmosphere for a long period may rely on deterioration caused by environmental indices such as atmospheric corrosion, galvanic corrosion, crevice corrosion and fatigue corrosion. This paper deals with material characteristic of ACSR due to eccentricity at sleeve point. Test samples are ACSR 240[$mm^2$] conductors, which are real transmission lines. As a result, it is obvious that ACSR due to eccentricity may lead to mechanical deterioration.

• 전자공학회논문지A
• /
• 제32A권10호
• /
• pp.64-72
• /
• 1995

In this paper, atmospheric turbulence and absorption under clear weather condition, which affect the optical satellite up-link communication between geo-satellites and earth station, were studied. In case of the up-link communication, the received optical power is weakened by pointing loss caused by beam tilt which is the main effect of turbulent atmosphere. This pointing loss directly has relation to the diameter of optical transmitting antenna. From the inverse proportion of the pointing and spaced loss, it is the regions where the diameter of transmitting antenna increases abruptly and the efficient design of transmitting antenna is impossible. In case of using channel coding, it was shown that the peak value of diameter moved to the lower regions of elevation angle with increasing the coding gain and its width was also decreased. In case of considering both coding gain and transmission rate on the design of transmitting antenna, it was known that more coding gain was necessary as transmission rate was increased.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 하계학술대회 논문집 A
• /
• pp.339-341
• /
• 2002

The remaining life of ACSR exposed to the atmosphere for a long period may rely on deterioration caused by environmental indices such as atmospheric corrosion, galvanic corrosion, crevice corrosion and fatigue corrosion. One of reduction of useful life in overhead transmission lines built on the ridge of mountain is often caused by forest fires. This paper deals with investigation of strength deterioration performance of ACSR due to fires through several testing and analyzing data for both tension load and material analysis. Test samples are ACSR $480[mm^2]$ conductors, which are artificially fired to regular durations. As a result, it can be verified that tension load of ACSR are reduced by increasing fro duration. Hence, it is obvious that ACSR due to forest fires may lead to mechanical deterioration.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 추계학술대회 논문집 전력기술부문
• /
• pp.377-379
• /
• 2001

Contamination flashover is responsible for insulator electrical failures. Particularly, in Korea, with its perennially dry spring, the first spring rain often cause serious line outages by forming a conductive liquid film on the insulator surface. Rainwater and fog are not normally conductive but unfortunately atmospheric dust deposited on the insulator surface contains soluble salts which may lead to bad condition of insulation by combining watery and salts. Transmission design engineers have used a contamination map drawn on the traditional paper map. But it is not convenient because it does not include the information of Geographic Information accurately. This paper explains the newly developed salt contamination map program using Geographic Information System, which provide accurate geographic information. The program is designed to use four parts of datum, salt contamination levels, 345kV & 154 kV transmission lines, power plants & substations and background map. The digital background map is composed of raster files, the others are done by vector map.

• Nuclear Engineering and Technology
• /
• 제36권1호
• /
• pp.12-23
• /
• 2004

In the present study a new measurement technique has been developed, which uses an ultrasonic transmission signal in order to identify the vertical two phase flow pattern. The ultrasonic measurement system developed in the present study not only provides the information required for the identification of vertical two phase flow patterns but also makes real time identification possible. Various vertical two phase flow patterns such as bubbly, slug, churn, annular flow etc. have been accurately identified with the present ultrasonic measurement system under atmospheric condition. In addition, the present test apparatus can practically simulate the ultrasonic propagation characteristics under high temperature and high pressure systems. Therefore, it is expected that the present ultrasonic flow pattern identification technique could be applicable to the vertical two phase flow systems under high temperature and high pressure conditions.