• Wind and Structures
• /
• 제7권2호
• /
• pp.131-144
• /
• 2004

A technique for the simulation of atmospheric boundary layers in wind tunnels is developed and tested experimentally. The device consists of a grid made of seven horizontal and vertical evenly distributed bars in which air injection holes are drilled in order to influence the flow in the wind tunnel. The air flow in each bar can be controlled independently. Firstly, the device is used together with a rough carpet, which covers the test section floor, in order to simulate the boundary-layer characteristics over an open rural area. Hot-wire measurements, performed at different positions in the test-section, show the capability of the grid in generating the required boundary layer. An acceptable agreement with statistical values of mean velocity and turbulence profiles has been achieved, together with a good span-wise homogeneity. The results are also compared with those of a passive simulation technique based on the use of spires.

• Asian Journal of Atmospheric Environment
• /
• 제8권2호
• /
• pp.108-114
• /
• 2014

In the companion paper (Lee et al., 2012), it was showed that CMAQ simulation using a lateral boundary conditions (LBCs) derived from RAQMS-CMAQ linkage, compared to the CMAQ results with the default CMAQ LBCs, improved ozone simulations in the conterminous US domain. In the present paper, the study is extended to investigate the influence of LBCs on PM2.5 simulation. MM5-SMOKE-CMAQ modeling system was used for meteorological field generation, emissions preparation and air quality simulations, respectively. Realtime Air Quality Modeling System (RAQMS) model assimilated with satellite observations were used to generate the CMAQ-ready LBCs. CMAQ PM2.5 simulations with RAQMS LBCs and predefined LBCs were compared with U.S. EPA Air Quality System (AQS) measurements. Mean PM2.5 lateral boundary conditions taken from RAQMS outputs showed strong variations both in the horizontal grid and vertical layers in the northern and western boundaries and affected the results of CMAQ PM2.5 predictions. CMAQ with RAQMS LBCs could improve CMAQ PM2.5 predictions resulting in the improvement of index of agreement from 0.38 to 0.63.

• Wind and Structures
• /
• 제35권6호
• /
• pp.419-430
• /
• 2022

In wind-resistant designs, wind velocity is assumed to be a Gaussian process; however, local complex topography may result in strong non-Gaussian wind features. This study investigates the non-Gaussian wind features over complex terrain under atmospheric turbulent boundary layers by the large eddy simulation (LES) model, and the turbulent inlet of LES is generated by the consistent discretizing random flow generation (CDRFG) method. The performance of LES is validated by two different complex terrains in Changsha and Mianyang, China, and the results are compared with wind tunnel tests and onsite measurements, respectively. Furthermore, the non-Gaussian parameters, such as skewness, kurtosis, probability curves, and gust factors, are analyzed in-depth. The results show that the LES method is in good agreement with both mean and turbulent wind fields from wind tunnel tests and onsite measurements. Wind fields in complex terrain mostly exhibit a left-skewed Gaussian process, and it changes from a softening Gaussian process to a hardening Gaussian process as the height increases. A reduction in the gust factors of about 2.0%-15.0% can be found by taking into account the non-Gaussian features, except for a 4.4% increase near the ground in steep terrain. This study can provide a reference for the assessment of extreme wind loads on structures in complex terrain.

• 대기
• /
• 제21권4호
• /
• pp.415-427
• /
• 2011

In this study, the impacts of land surface conditions, land cover (LC) map and leaf area index (LAI), on the short-range weather forecast over the East-Asian region were examined using Unified Model (UM) coupled with the MOSES 2.2 (Met-Office Surface Exchange Scheme). Four types of experiments were performed at 12-km horizontal resolution with 38 vertical layers for two months, July and August 2009 through consecutive reruns of 72-hour every 12 hours, 00 and 12 UTC. The control experiment (CTRL) uses the original IGBP (International Geosphere-Biosphere Programme) LC map and old MODIS (MODerate resolution Imaging Spectroradiometer) LAI, the new LAI experiment (NLAI) uses improved monthly MODIS LAI. The new LC experiment (NLCE) uses KLC_v2 (Kongju National Univ. land cover), and the new land surface experiment (NLSE) uses KLC_v2 and new LAI. The reduced albedo and increased roughness length over southern part of China caused by the increased broadleaf fraction resulted in increase of land surface temperature (LST), air temperature, and sensible heat flux (SHF). Whereas, the LST and SHF over south-eastern part of Russia is decreased by the decreased needleleaf fraction and increased albedo. The changed wind speed induced by the LC and LAI changes also contribute the LST distribution through the change of vertical mixing and advection. The improvement of LC and LAI data clearly reduced the systematic underestimation of air temperature over South Korea. Whereas, the impacts of LC and LAI conditions on the simulation skills of precipitation are not systematic. In general, the impacts of LC changes on the short range forecast are more significant than that of LAI changes.

• 한국산림과학회지
• /
• 제85권2호
• /
• pp.210-224
• /
• 1996

SLODSVAT 모델은 (1)식생의 환경 조건과 생태 생리학적 특징에 의해 결정된 두개 수관층에서의 복사, 수분증발, 열, 이산화탄소 및 바람(momentum) 등의 이동과, (2)식물의 뿌리, 줄기, 잎으로 이어지는 수분의 흡수와 저장 및, (3)수관에 의한 강우의 차단, 그리고 토양에 의한 강우의 저장과 유하 등을 Simulation한 상호관련된 몇 개의 하위 모델들로 구성되어 있다. 본 연구에서는 독일 중부에 위치한 Solling지방의 독일가문비림(Picea abies L Karst)을 대상으로 기후 관측 결과와 모델링에 의한 결과를 서로 비교해 본 바, SLODSVAT는 서로 다른 환경 조건하에서 수분증발과 열 흐름의 계절적 변화 뿐만 아니라 일변화도 자연적 과정에 맞게 적절히 설명할 수 있음을 알 수 있었고, 또한 대기, 임관 및 토양 구조에 대한 기상학적, 식물학적, 수문학적 자료들이 유능하다면 독일가문비림 생태계에 대한 증산과 증발산의 비를 평가하고 예측함이 가능함을 알 수 있었다.

• 대기
• /
• 제18권4호
• /
• pp.387-395
• /
• 2008

The impact of horizontal resolution on a regional climate model was investigated by simulating precipitation over the Korean Peninsula. As a regional climate model, the SNURCM(Seoul National University Regional Climate Model) has 21 sigma layers and includes the NCAR CLM(National Center for Atmospheric Research Community Land Model) for land-surface model, the Grell scheme for cumulus convection, the Simple Ice scheme for explicit moisture, and the MRF(Medium-Range Forecast) scheme for PBL(Planetary Boundary Layer) processing. The SNURCM was performed with 20 km resolution for Korea and 60 km resolution for East Asia during a 20-year period (1980-1999). Although the SNURCM systematically underestimated precipitation over the Korean Peninsula, the increase of model resolution simulated more precipitation in the southern region of the Korean Peninsula, and a more accurate distribution of precipitation by reflecting the effect of topography. The increase of precipitation was produced by more detailed terrain data which has a 10 minute terrain in the 20 km resolution model compared to the 30 minute terrain in the 60 km resolution model. The increase in model resolution and more detailed terrain data played an important role in generating more precipitation over the Korean Peninsula. While the high resolution model with the same terrain data resulted in increasing of precipitation over the Korean Peninsula including the adjoining sea, the difference of the terrain data resolution only influenced the precipitation distribution of the mountainous area by increasing the amount of non-convective rain. In conclusion, the regional climate model (SNURCM) with higher resolution simulated more precipitation over the Korean Peninsula by reducing the systematic underestimation of precipitation over the Korean Peninsula.

• 한국농림기상학회지
• /
• 제17권4호
• /
• pp.384-398
• /
• 2015

본 연구에서는 청미천 농경지를 중심으로 고해상도 지형 및 토지피복 자료 기반의 WRF/Noah-MP 결합시스템을 구축하고 수치모의 한 결과를 2014년 8월 21일부터 9월 10일까지의 청미천 하계 특별관측 자료와 비교하여, 농경지에서의 지면 및 대기모의 성능을 평가하였다. 지면 및 대기 변수의 단기 및 중기모의에 있어서 Noah-MP의 동적 식생 가동이 얼마나 유용한지를 살펴보기 위하여, 동적 식생을 포함하지 않은 실험(CTL)과 포함한 실험(DVG)을 관측기간에 대해 양방향 6중 둥지격자 시스템으로 수행하였다. 본 연구의 결과는 크게 세 가지로서 다음과 같다. 1) CTL 실험은 낮 동안의 순단파 복사 에너지를 과대 모의 함에 따라 현열 및 잠열 플럭스와 보웬비도 관측에 비해 과대 모의하는 경향을 보였다. CTL 실험의 기온은 관측을 대체로 잘 따라갔으나 일출 후 기온의 상승 속도가 관측에 비해 빠른 모습을 보였다. 최저 기온 및 최고 기온의 시점은 잘 모의하였는데, 특히 일 최저기온의 모의는 관측과 $0.3^{\circ}C$ 오차 이내의 성능을 보여, 동해 및 병해충과 연관된 엽면수분 지속시간 예측에 고무적인 결과로 평가되었다. CTL 실험의 10m 바람은 동서 및 남북 풍속 모두 대체로 과대 모의하는 경향을 보였고, 강수 또한 과대 모의하는 경향을 보였으나 강수의 시작 종료시점은 대체로 잘 포착하였다. 2) Noah-MP의 동적 식생을 구동시킨 DVG 실험은 CTL 실험에 비해 엽면적지수, 단파 복사, 지표면 플럭스, 보웬비, 기온, 바람, 강수의 모의를 전반적으로 관측에 더 가깝게 생산하는 것으로 나타났다. 강수, 온도, 복사, 가용 영양소 등의 변동에 대응하여 엽면적지수를 예단하는 DVG 실험은 CTL 실험보다 더 큰 엽면적지수를 생산했으며, 이는 실측에 더 가까운 결과였다. DVG 실험에서도 일출 후 기온 상승률은 관측에 비해 높았는데, 이는 CTL와 DVG 실험 모두에서 공통으로 사용한 YSU 경계층 방안이 갖는 혼합층의 조기 성장 특성과 관련이 있는 것으로 분석되었다. CTL 실험이 보인 바람과 강수의 과대모의 경향도 DVG 실험에서는 어느 정도 완화되는 개선점을 보였다. 3) 수평 해상도의 증가에 따른 청미천 농경지의 수치모의 성능 향상은 지표면 플럭스, 기온, 바람 강수 모두에서 미비하거나 거의 없는 것으로 나타났으며, 보다 정확한 평가를 위해서는 농경지 상의 여러 지점에서 입체적인 관측이 이뤄져야 하고, 모형에 사용되는 지형 및 토지피복 자료의 도메인 간 일관성이 확보되어야 할 것이다.