• 한국지진공학회논문집
• /
• 제12권4호
• /
• pp.35-44
• /
• 2008

최근 새로운 지진하중 저항시스템으로 셀프센터링(SCED) 가새 시스템이 개발되었다. 진보된 가새 시스템인 비좌굴 가새(BRB) 시스템과는 달리 큰 지진이 발생한 후 구조물의 잔류 변형을 줄이거나 없앨 수 있는 셀프센터링 능력은 SCED 가새 시스템의 장점이다. 본 논문에서는 SCED 가새와 BRB 가새 시스템의 거동에 비틀림의 영향을 조사하기 위하여 세 가지 다른 편심을 가진 3차원 구조물의 응답을 비선형 동적해석을 수행하여 비교하였다. 해석결과에 따르면 층간변위의 높이방향의 변화는 비정형성에 관계없이 SCED 가새골조의 응답이 BRB 가새골조보다 일정하였으며, 잔류 층간변위와 잔류 회전 응답은 비정형성이 증가함에 따라 감소하였다. 중층 구조물에서 SCED 가새골조의 변형집중계수(DCF)는 BRB 가새골조보다 작은 것으로 나타났다. 이것은 SCED 가새골조가 건물 높이에 따라 보다 일정하게 변형함을 의미한다. DCF의 크기에 대한 비틀림 비정형의 효과는 작았다.

• 한국인터넷방송통신학회논문지
• /
• 제17권1호
• /
• pp.225-230
• /
• 2017

본 논문에서는 높은 효율의 GMR(guided-mode resonant) 컬러 필터를 제안하고 구현하였다. GMR 컬러 필터는 서로 보완적인 고정 격자와 이동 격자가 포함한 $Si_3N_4/air$ 층으로 구성하였다. 제안한 소자는 정확한 등가 전송선로 이론(RETT)에 기초한 수치 해석과 서브 파장 대역에서 동작하는 격자구조를 사용하여 설계하였다. 수치해석 결과, GMR 컬러 필터는 $0.45{\mu}m{\sim}0.55{\mu}m$ 범위에서 blue-green 컬러에 대하여 그리고 $0.6{\mu}m{\sim}0.7{\mu}m$ 범위에서 red 컬러에 대하여 약 35 nm의 동조특성을 보였다. 또한, 컬러 필터는 blue, green 그리고 red 컬러의 중심 주파수에서 각각 99%, 98%, 99%의 효율을 가지고 약 8 nm의 대역폭을 나타내었으며, 앞선 논문들에서 보고된 내용보다 더 높은 효율을 보여주었다.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2006년도 정기 학술대회 논문집
• /
• pp.283-290
• /
• 2006

Cable-stayed bridge is a bridge that consists of one or more pylons, with cables supporting the deck. Cable-stayed bridges have come into wide use recently because of their economy, stability, and excellent appearance. It is possible to achieve a uniform moment distribution in the stiffening girders mainly by prestressing the cables, which leads to a more economical design in material and weight than other types of bridges. However, to achieve a more uniform moment distribution is vague objective, so it cannot be easily defined as the optimization problem. In other words, the minimization of cost or weight as the objective is not directly related to the optimization of cable prestressing. Therefore, it has been considered as one of the most important, difficult and also interesting topics among many researchers and bridge engineers to determine the optimal tensioning strategy how to apply prestressing forces of the cables of cable-stayed bridge. A number of approaches (Wang et al. 1993, $Negr\~{a}o\;and\;Sim\~{o}es$ 1997, Agrawal 1997, Janjic et al. 2003) to determine the optimal cable tensions have been proposed in the literature. Among these approaches the unit load method (Janjic et al. 2003) is considered in this paper because it can take into account the actual construction process while other approaches are based on the configuration of the final structure only. In this paper, '2-step approach' based on the unit load method is proposed to find the optimal tensioning strategy especially for the atypical asymmetric bridge under construction, which has continuous deck supported by one pylon and stay cables. Some numerical results will be given to show the validity of the new approach suggested in this paper.

• 자원환경지질
• /
• 제29권5호
• /
• pp.639-660
• /
• 1996

The lowest formation of the Cretaceous Gyeongsang Supergroup, the Nakdong Formation, unconformably overlies the gneiss complex basement in Hadong, Gyeongsangnam-do and Gwangyang, Chullanam-do. The Nakdong Formation of the study area is 500-600 m thick and occurs as a belt shape. Based upon lithology, sedimentary structure, and bedding geometry the formation consists of three conglomerate facies (Gd, Gn, Gic), five sandstone facies (Sh-n, Sh-i, Sp, Sr, Sm), and four mudstone facies (Mf, Mfn, Mc, Mv). Sandstone facies are the most prominent in the study area. The twelve facies can be grouped into five facies associations. The depositional settings are elucidated from analyses of 12 facies and five facies associations of the formation. The lower part of the Nakdong Formation was deposited in alluvial plain, and the middle and upper parts were in a riverine system. The lithologies of the Nakdong Formation of the Gyeongsang Basin have been considered to consist of generally conglomerates and pebbly sandstones that were accumulated in alluvial fans. But the common lithology of the study area is sandstone which was formed in lower part of alluvial fan or fluvial setting. It is supposed that the coarser sedimentary sequence distributed west to the study area should be eroded out after deposition and early uplift, and the finer sandstone sequence in the east remains behind. The mineral composition of sandstones and the clast composition of conglomerates indicate that the Nakdong Formation was derived mainly from the metamorphic source rocks. Some reworked intraclasts were also supplied from the intrabasinal sedimentary layers. Paleocurrent data collected from cross-beddings, ripple marks, asymmetric sand dune suggest that most sediments were transported from north to south during the Nakdong Formation time.

• 공업화학
• /
• 제19권6호
• /
• pp.633-639
• /
• 2008

상전환법을 이용하여 폴리설폰, n-메틸피롤리돈과 톨루엔으로 이루어진 제막용액으로부터 고분자 분리막이 제조되었다. 톨루엔은 폴리설폰에 대한 비용매로서 제막용액에 첨가되었으며, 침지용 비용매로는 이소프로필알코올이 사용되었다. 제조된 모든 분리막은 밀집 형상의 표면층과 스폰지 형상의 하부층으로 구성된 이중구조 형태의 비대칭성 구조를 보였다. 첨가된 톨루엔은 제막용액의 열역학적 성질을 변화시켜 열역학적 상분리를 촉진하는 역할을 할 수 있음을 보였으며, 제조된 분리막은 톨루엔을 첨가에 의해 막의 표면층 두께가 증가하는 특성을 보였다. 분리막의 투과 특성을 측정한 결과, 톨루엔이 첨가되었을 때 밀집 표면층의 두께 증가에도 불구하고 거의 동일한 배제율을 유지하면서 투과플럭스는 5배 이상 증대하는 효과를 보였다.

• 센서학회지
• /
• 제13권2호
• /
• pp.101-109
• /
• 2004

This paper presents a novel z-axis accelerometer with perfectly aligned vertical combs fabricated using the extended sacrificial bulk micromachining (extended SBM) process. The z-axis accelerometer is fabricated using only one (111) SOI wafer and two photo masks without wafer bonding or CMP processes as used by other research efforts that involve vertical combs. In our process, there is no misalignment in lateral gap between the upper and lower comb electrodes, because all critical dimensions including lateral gaps are defined using only one mask. The fabricated accelerometer has the structure thickness of $30{\mu}m$, the vertical offset of $12{\mu}m$, and lateral gap between electrodes of $4{\mu}m$. Torsional springs and asymmetric proof mass produce a vertical displacement when an external z-axis acceleration is applied, and capacitance change due to the vertical displacement of the comb is detected by charge-to-voltage converter. The signal-to-noise ratio of the modulated and demodulated output signal is 80 dB and 76.5 dB, respectively. The noise equivalent input acceleration resolution of the modulated and demodulated output signal is calculated to be $500{\mu}g$ and $748{\mu}g$. The scale factor and linearity of the accelerometer are measured to be 1.1 mV/g and 1.18% FSO, respectively.

• 천문학회보
• /
• 제42권1호
• /
• pp.46.3-47
• /
• 2017

We performed simultaneous VLBI observations of H2O 616-523 (22.2 GHz) and SiO v=1, 2, J=1-0 (43.1, 42.8 GHz) and v=1, J=2-1, J=3-2 (86.2, 129.3 GHz) masers toward VX Sagittarius using the Korean VLBI Network (KVN). The astrometrically registered maps of the 22.2 GHz H2O and 43.1, 42.8, 86.2 SiO masers were successfully obtained at two epochs of 2016 February 27 and 2016 March 27 by adopting the Source Frequency Phase Referencing (SFPR) method. In addition we detected 129.3 Ghz SiO maser at second epoch. These results make it possible to determine the accurate position of central star as a dynamical center of 22.2 GHz H2O maser and relative locations of 43.1, 42.8, 86.2, 129.3 GHz SiO masers. In addition, it is possible to investigate the morphological and kinematic variations of clumpy structures from SiO maser to H2O maser regions in future together with the development of asymmetric structure of H2O maser region.

• 마이크로전자및패키징학회지
• /
• 제13권2호
• /
• pp.1-7
• /
• 2006

본 논문에서는 솔더 레지스트(solder resist)의 두께와 코어의 물성에 따른 인쇄회로기판의 철의 크기와 형상에 대하여 연구하였다. 인쇄회로기판의 굽힘 변형은 적층되는 재료의 열팽창계수의 차이에 의해 발생한다. 따라서 굽힘 변형의 감소를 위해서는 열팽창계수의 차이가 작은 적층 재료를 사용하는 것이 필요하며, 구조 형상에서도 상면과 하면의 불균일성을 완화시킬 필요가 있다. 또한, 적층 재료에서 코어의 강성을 높여 점의 발생을 억제할 수 있다. 코어를 이루는 복합재료는 적층 순서와 섬유 각에 따른 물성 특성의 방향성에 따라 굽힘과 비틀림이 연성되는 현상을 보이며, 이와 같은 성질을 이용하면 휨을 제어할 수 있다. 본 연구에서는 2층으로 구성된 chip scale package (CSP) 기판의 휨에 대한 연구로, 실험 및 유한 요소해석 툴을 이용하여 개선 결과를 도출하였다.

• 복식
• /
• 제57권10호
• /
• pp.129-141
• /
• 2007

In the cultural realm of Hinduism centering around India, traditional costumes such as Sari, and Dhoti are worn up to date under the influence of religious faith, tradition, and fundamentalism. The purpose of this study is to clarify the religious meaning of unstitched traditional Indian costume and inquire into the figurative beauty of it. This study revolved around India, and the aesthetic feature affected by hinduism was examined based on the literature references and the figurative feature and aesthetic value of unstitched costume were analyzed. The most important feature of Indian costume is the unstitched costume without joining pieces of cloth by using a needle and thread, symbolizing the purity based on the cosmology of Hindu. In the unstitched costume of India, natural drapery that is the large cloth, slipped or tied on body, wrapping it affluently, is emphasized. Unstitched costume of India, based on cosmology of Hindu and the concept of purity, is still broadly worn by people under the influence of fundamentalism and conservative atmosphere. Religious idea is expressed and a beauty of concealment, emphasizing the chastity, is shown in the unstitched costume of India, while a beauty of nature is distinctively revealed in the non-structural and asymmetric drapery costume due to the unique wearing style. In addition, 'A beauty of symbolism' appears in the wearing method, color, the part of wearing, and ornament. Religion has affected overall culture that is inclusive art, aesthetics, and social structure and has contributed to the formulation of costume style. Unstitched costume of India is the unique tradition of India and identity, based on the religious idea.

• Ocean and Polar Research
• /
• 제24권3호
• /
• pp.179-187
• /
• 2002

The Ayu Trough, located in the southern end of the Philippine Sea, represents a divergent boundary between the Philippine Sea and the Caroline Plates. A detailed geophysical survey was carried out in the Ayu Trough by R/V Onnuri. Topographically, the Ayu Trough resembles an slow spreading ridge. The trough can be divided into three sections: the south $(0^{\circ}-1^{\circ}30'N),\;middle\;(1^{\circ}30'-4^{\circ}N)$, and north $(4^{\circ}-6^{\circ}30'N)$. The seafloor in the middle section is characterized by features asymmetric with respect to the axis. These features were probably produced by NW-SE and NNW-SSE extensions and seem to support the argument that the opening of the Ayu Trough occurred in an oblique fashion. Farther south, a long transform fault but with a short offset defines the boundary between middle and southern sections. The axial depth increases a stepwise to the south of $1^{\circ}30'N$. A clear difference can be seen between the southern and middle sections with the latter exhibiting much higher mantle Bouguer anomaly values in the axial region. The anomaly indicates that the axial crust perhaps experienced a much higher degree of extension in the middle than in the southern section. The analyses of magnetic field data reveal that the region beyond 100km exhibits considerable variations, whereas the magnetic anomalies within 100km from the trough axis are very much subdued. This observation suggests that the opening of the Ayu Trough involved an initial stage of rifting of existing volcanic arcs, followed by production of new seafloor.