• 한국펄프종이공학회:학술대회논문집
• /
• 한국펄프종이공학회 2006년도 PAN PACIFIC CONFERENCE vol.2
• /
• pp.395-400
• /
• 2006

Polylactic acids polymer (PLA) was applied as an additive to improve the strength properties of handsheets prepared from three unbleached southern pine kraft pulps with different kappa number and an aspen bleached chemithermomechanical pulp (BCTMP). The results showed that PLA could greatly improve the tensile and burst strength of the pulp handsheets. Heat pressing effect was also important to enhance the strength properties. For unbleached kraft pulps, it was found that an appropriate amount of residual lignin in pulps had a positive effect on the handsheets strength improvement when adding PLA. The thickness of the handsheet did not change the PLA strengthening effect. In general, PLA effect on tear strength improvement could be neglected. However, it had a significant effect on the improvement of tear strength for the aspen BCTMP handsheets not containing sufficient amount of fines.

• 펄프종이기술
• /
• 제33권3호
• /
• pp.1-8
• /
• 2001

Paper consists of fiber network and paper properties were highly affected by fiber characteristics. Many researchers have tried to relate fiber and paper properties. Softwood and hardwood fiber's are quite different in their properties. Generally, softwood fiber's are longer and more flexible than hardwood fibers. At present, many paper mills make mixed paper with softwood and hardwood fibers except for special grade. During fracture some fiber's are broken and others are pulled out. In this paper, the number of broken and pulled out fiber's during fracture is analyzed depending on the mixing ratio of softwood and hardwood fiber's. Fiber length, curl, kink, coarseness, WRV and formation index were measured. Double-edged strength samples were prepared to observe the number of broken and pulled out fiber's. Mixed paper strength was decreased with increasing hardwood fibers ratio. During fracture, softwood fiber's were more likely broken and hardwood fibers were more likely pulled out. The strength of paper which consists of softwood fibers was determined by fiber's broken strength and that of hardwood fibers by fiber's debonding strength. Paper strength was changed depending on the fiber's bonding capability. If the fiber is longer and more flexible, the fiber network becomes stronger and stiffer.

• 한국공간구조학회논문집
• /
• 제7권3호
• /
• pp.79-86
• /
• 2007

최근, 건설되어지는 강구조물들의 장경간화 및 고층화로 인하여 고강도강재의 적용이 점차 요구되고 있다. 고강도강재는 적용구조물들을 공간 및 두께들 감소시킴으로써 외관성 및 경제성을 증가시킬 수 있는 장점이 있다. 이러한 고강도 강재의 적용을 위해서는 좌굴에 대한 기준이 필요하나 현재 국내의 경우 이러한 좌굴에 관한 연구가 미흡하다. 이에 본 연구에서는 3차원 탄소성 유한변위 프로그램을 이용하여 고강도 박스단면 트러스 부재의 좌굴거동에 대한 해석적 연구를 수행하였다. 고강도강재를 적용한 박스단면 트러스부재의 허용 압축응력에 대한 기준을 제안하였으며 그 적용성을 확인하였다. 그리고 고강도 트러스 부재의 설계에도 적용할 수 있음을 명확히 하였다.

• 한국터널지하공간학회 논문집
• /
• 제14권3호
• /
• pp.215-230
• /
• 2012

본 연구에서는 세그먼트의 제작비용을 절감하기 위한 방안으로서, 설계강도가 60 MPa인 고강도 콘크리트와 항복강도가 600 MPa인 고장력 철근을 사용하여 철근량을 저감시킨 고강도 철근보강 세그먼트 시작품을 제작하였다. 이상과 같이 제작된 고강도 세그먼트와 기존 철근보강 세그먼트의 역학적 거동을 비교하기 위하여, 세그먼트의 실물 휨실험을 실시하였다. 실험결과, 철근량이 약 26%가 감소하였음에도 불구하고 고강도 철근보강 세그먼트의 파괴하중은 일반 철근보강 세그먼트보다 약 30% 크게 나타나 고강도 콘크리트와 고장력 철근으로 인해 세그먼트의 내하력이 크게 향상되었음을 확인하였다.

• 펄프종이기술
• /
• 제42권2호
• /
• pp.41-45
• /
• 2010

This study was performed to evaluate the effect of paper property changes by internal addition of surface strength agent on printability. Advances in printing technique has required the development of paper qualities in many aspects. Basically paper structure is composed of hydrogen bonds which induce many problems in high speed printing machine because of weak bonding strength. One of the important printing problems is surface picking when mechanical pulp or recycled pulp are used. It was caused by the ink-stained blanket in printing process because accumulations of pollutant in white water and other elements which are bonded weakly or do not have hydrogen bonds. Debris at paper surface adheres to blanket which deteriorates printing efficiency and causes various problems. To complement these problems, Pennocel 5137 of polysaccharide structure was used as an agent to improve paper's surface property, strength and printability. Paper surface picking was analyzed by RI-1 test. As the dosage amount increased tensile strength, fiber bonding strength and ZDT strength were improved. Further more formation, smoothness and surface picking resistance were improved. It was confirmed that when adding polysaccharide structure polymers to improve surface strength such as surface picking resistance, it was also possible to improve tensile strength, fiber bonding strength, formation and smoothness.

• 한국공간구조학회논문집
• /
• 제6권2호
• /
• pp.53-60
• /
• 2006

고강도 재료(고강도 콘크리트, 고강도 철근)가 사용된 철근콘크리트 부재의 전단파괴모드는 보통강도 재료를 사용한 부재의 전단파괴모드와 상이한 결과를 나타낼 수 있다. 고강도 재료가 사용될 경우에 구조설계기준식에서 요구하는 전단보강철근이 먼저 항복한 후에 콘크리트가 압축파괴하는 것과는 다르게, 철근이 항복하기 이전에 콘크리트가 압축파괴할 수 있다. 이 논문에서는 고강도 재료가 사용된 철근콘크리트 부재의 최대철근비를 균형파괴시의 재료의 응력 및 변형률 상태를 이용하여 계산하였다. 제안식에서 최대철근비는 콘크리트의 압축강도와 전단보강철근의 상호관계에 의하여 변화하였다. 제안식은 97개의 철근콘크리트 부재에 대한 실험결과와 비교되었다. 실험결과 및 계산결과는 철근콘크리트 부재의 파괴모드가 전단보강철근의 양과 콘크리트의 압축강도와 밀접한 관계가 있음을 나타내었다.

• 한국공간구조학회논문집
• /
• 제5권2호
• /
• pp.89-97
• /
• 2005

건축 구조물이 초고층화, 대형화, 특수화 되어감에 따라 고강도 재료의 사용이 증대되고 있으며, 고강도 재료가 사용된 철근콘크리트 보의 전단강도를 타당하게 예측할 수 있는 해석모델이 반드시 필요하다. 본 연구에서는 고강도 철근이 사용된 철근콘크리트 보의 전단강도를 타당하게 예측할 수 있는 트러스 모델을 제안한다. 고강도 철근이 사용된 철근콘크리트 보의 전단강도에 대한 제안된 모델인 TATM의 타당성을 검토하기 위하여 총 107개 보의 실험결과를 수집하였으며, TATM 및 기존 트러스 모델의 전단강도 해석결과를 이들 실험결과와 비교하였다. 비교 결과, TATM은 다른 트러스 모델보다 실험결과를 더 잘 예측하였으며, TATM의 해석결과에 대한 실험결과의 비는 인장철근과 전단 철근의 항복강도에 거의 관계없이 일정하였다.

• 한국치위생학회지
• /
• 제19권5호
• /
• pp.743-752
• /
• 2019

Objectives: Grip strength is a measure for assessing overall muscle strength, muscle mass, and nutritional status, and is a useful tool for early examination of a person's general health. Thus, this study analyzed the association between oral health-related factors and grip strength, using the 6th Korea National Health and Nutrition Examination Survey (KNHANES) data. Methods: Data were analyzed using the IBM SPSS version 25.0 (IBM Co., Armonk, NY, USA) software with a complex sampling analysis of stratified and clustered variables, all with weighted values, applied for every analysis conducted. From the 6th KNHANES data, a total of 26,101 people were selected as the study population. A complex sample generalized linear model analysis was performed for participants' sociodemographic characteristics, health status, use of oral care products, and factors such as adult mastication and speaking habits. Results: Grip strength was found to be higher among men compared to women. Grip strength was the highest in the 20-39 year old group. Furthermore, grip strength was statistically significantly higher among married and employed individuals, and in the right hand (p<0.001). Grip strength was statistically significantly higher among people who perceived themselves to have good health and among those who did not have health-related problems in the past two weeks (p<0.001). It was also higher among those who used interdental brushes and electronic toothbrushes (p<0.001), but decreased with greater discomfort in mastication and speaking among adults (p<0.05). Conclusions: Grip strength was found to be associated with oral health-related factors and therefore, these could be helpful tools in evaluating both general and subjective health statuses. In general, oral care products are small in size with oral care involving the use of hands and certain precise motions and actions to remove foreign substances in the oral cavity. As shown in the findings, grip strength declines with increased age and as a result, the use of oral care products should be strongly recommended in order to promote better general health.

• Journal of Nutrition and Health
• /
• 제55권6호
• /
• pp.684-698
• /
• 2022

Purpose: Recent studies have reported a significant association between skeletal muscle, muscle strength and non-alcoholic fatty liver disease (NAFLD). The effect of nutrient intake on the prediction of skeletal muscle mass and strength or its suggested correlation with metabolic diseases has been primarily reported in healthy individuals. The current study explores the association between energy intake and handgrip strength (HGS) in individuals with NAFLD. Methods: Data were obtained from the Korea National Health and Nutrition Examination Surveys 2016-2018. Data from 12,469 participants were extracted and 1,293 men and 1,401 women aged 20 years and older were included in the analyses of patients with NAFLD. The presence of NAFLD was determined using the hepatic steatosis index. To estimate relative skeletal muscle strength, HGS was measured using a digital dynamometer and calculated by adjusting the body mass index of the dominant arm. Study subjects in the NAFLD and non-NAFLD groups were separately categorized according to quartiles of the calculated HGS. Results: We found that individuals with low (EQ1) energy intake had lower odds of HGS compared to subjects with high (EQ4) energy intake, irrespective of their NAFLD status (p < 0.0001). However, the HGS did not differ based on the level of protein or fat intake ratio. Additionally, the effect of energy intake on HGS was more pronounced in men than in women. Conclusion: Energy intake was associated with the risk of weak HGS in men with NAFLD. The results indicate that energy intake may be a key factor in nutrition care for NAFLD patients with low muscle function.

• 건설안전기술
• /
• 통권38호
• /
• pp.79-87
• /
• 2006

Formwork is a temporary structure that supports its weight and that of freshly placed concrete as well as construction live loads. In constructions site, pipe supports are usually used as shores which are consisted of the stab formwork. The strength of a pipe support is decreasing as it is frequently being used at the construction site. Among the accidents and failures that occur during concrete construction, there are many formwork failures which usually happen at the time concrete is being placed. The objective of this study is to find out the strength change of used pipe support and unused pipe supports according to aging. In this study, 2857 pipe supports were prepared. Among these pipe supports, 2337 pipe supports were lent to the construction companies free of charge. 520 pipe supports were kept on the outside. Compressive strength was measured by knife edge test and plate test at each 3 month. Test results show that the strength of unused pipe supports as well as used pipe supports was decreasing according to age, use frequency and load carrier, and the strength of used pipe supports was lower than the strength of unused pipe supports at the same age. So, the strength of used pipe supports from 191 days to present day was not satisfied the specification of KSF 8001. In this study, the strength of pipe support according to age, use frequency and load carrier was predicted using SPSS 12.0. It was known that the strength of pipe support using for 5 years was reduced to 42.8%. According to these results, it shows that attention has to be paid to formwork design using used pipe supports. Therefore, the present study results will be able to provide a firm base to prevent formwork collapses.