• 한국실내디자인학회논문집
• /
• 제16권2호
• /
• pp.63-70
• /
• 2007

Analogy in problem solving is similarity-based reasoning facilitated by verbal and visual operation. This similarity-based reasoning generally supports initial phase of idea search. Therefore, this study intends to infer the types of problem solving by tracing the analogy use of verbal and visual representation through a experimental research. According to the result of this research, the types of problem solving by analogy are classified into 'evolving', 'divergent', and 'poor conversion' type. Firstly, 'evolving type' is distinguished between 'combination type' associated different contents to develope a new design and 'transformation type' associated similar words and sketches to be continuously revised and developed. In these types usually structural analogy rather than surface analogy is used. Secondly, in 'divergent type' associated words or sketches are individually represented, and among them one design solution is selected. In this type usually surface analogy is used. Thirdly, in 'poor conversion type' interaction between verbal representation and visual representation does not go on smoothly, and the generation of idea is poor. In here surface analogy is mostly used. These findings could form the basis of skill development of idea generation and conversion in design education.

• International Journal of Aeronautical and Space Sciences
• /
• 제17권1호
• /
• pp.45-53
• /
• 2016

This work is mainly done by too many manual operations in the aircraft structure design process resulting in heavy workload, low efficiency and quality, non-standardized processes and procedures. A top-down associated design method employing the template parametric technology is proposed here in order to improve the quality of design and efficiency of aircraft wing structure at the preliminary design stage. The appropriate parametric tool is chosen and the rapid design system of knowledge-driven aircraft wing structure is developed. First, a skeleton model of aircraft wing structure is rapidly built up through the template encapsulated design knowledge. Associated design is then introduced to realize the association between the typical structural part and skeleton model. Finally, the related elements are referenced from skeleton model, and a typical structural part reflecting an automatic response for design changes of the upstream skeleton model is quickly constructed within the template. The rapid design system proposed and developed in this paper is able to formalize the design standardization of aircraft wing structure and thus the rapid generation of different aircraft wing structure programs and achieve the structural design knowledge reuse as well.

• 품질경영학회지
• /
• 제48권1호
• /
• pp.51-68
• /
• 2020

Purpose: The primary objective of this research is to develop the optimal operating conditions as well as their associated design spaces for a Cryogenic Submerged Arc Welding(SAW) process by improving its quality and productivity simultaneously. Methods: In order to investigate functional relationships among quality characteristics and their associated control factors of an SAW process, a stepwise design of experiment(DoE) method is proposed in this paper. Based on the DoE results, not only a multi-dimensional design space but also a safe operating space and normal acceptable range(NAR) by integrating statistical confidence intervals were demonstrated. In addition, the optimal operating conditions within the proposed NAR can be obtained by a robust optimal design method. Results: This study provides a customized stepwise DoE method (i.e., a sequential set of DoE such as a factorial design and a central composite design) for Cryogenic SAW process and its statistical analysis results. DoE results can then provide both the main and interaction effects of input control factors and the functional relationships between the input factors and their associated output responses. Maximizing both the product quality with high impact strength and the productivity with minimum processing times simultaneously in a case study, we proposed a design space which can provide both acceptable productivity and quality levels and NARs of input control factors. In order to confirm the optimal factor settings and the proposed NARs, validation experiments were performed. Conclusion: This research may provide significant contributions and applications to many SAW problems by preparing a standardization of the functional relationship between the input factors and their associated output response. Moreover, the proposed design space based on DoE and NAR methods can simultaneously consider a number of quality characteristics including tradeoff between productivity and quality levels.

• 복식문화연구
• /
• 제31권4호
• /
• pp.489-503
• /
• 2023

This study utilized the unified theory of acceptance and use of technology 2 (UTAUT2) to examine usage intentions associated with virtual fitting services. Six independent variables were examined: performance expectancy, effort expectancy, social influence, facilitating conditions, hedonic motivation, and habit. The study collected responses from 445 participants who had utilized virtual fitting services. Regarding factors related to usage intentions associated with these services, performance expectancy and social influence were found to significantly influence the usage intentions associated with photo-based virtual fitting services. Furthermore, performance expectancy, social influence, and habit significantly influenced the usage intention of avatar-based virtual fitting services. This suggests that higher levels of performance expectancy and social influence positively impact the usage intentions associated with both types of virtual fitting services, while habit influences only avatar-based virtual fitting services. Moreover, the findings confirm that effort expectancy, facilitating conditions, and hedonic motivation from UTAUT2 do not significantly influence usage intentions associated with virtual fitting services. By analyzing factors influencing potential customers' virtual fitting service usage intentions, this study can suggest effective strategies to increase usage intentions for companies providing virtual fitting services. Additionally, these findings can be utilized in the formulation of virtual fitting service marketing strategies.

• Journal of Microbiology and Biotechnology
• /
• 제22권2호
• /
• pp.199-206
• /
• 2012

Naturally immobilized tannase (tannin acyl hydrolase, E.C. 3.1.1.20) has many advantages, as it avoids the expensive and laborious operation of isolation, purification, and immobilization, plus it is highly stable in adverse pH and temperature. However, in the case of cell-associated enzymes, since the enzyme is associated with the biomass, separation of the pure biomass is necessary. However, tannic acid, a known inducer of tannase, forms insoluble complexes with media proteins, making it difficult to separate pure biomass. Therefore, this study optimizes the production of cell-associated tannase using a "protein-tannin complex" free media. An exploratory study was first conducted in shake-flasks to select the inducer, carbon source, and nitrogen sources. As a result it was found that gallic acid induces tannase synthesis, a tryptose broth gives higher biomass, and lactose supplementation is beneficial. The medium was then optimized using response surface methodology based on the full factorial central composite design in a 3 l bioreactor. A $2^3$ factorial design augmented by 7 axial points (${\alpha}$ = 1.682) and 2 replicates at the center point was implemented in 17 experiments. A mathematical model was also developed to show the effect of each medium component and their interactions on the production of cell-associated tannase. The validity of the proposed model was verified, and the optimized medium was shown to produce maximum cell-associated tannase activity of 9.65 U/l, which is 93.8% higher than the activity in the basal medium, after 12 h at pH 5.0, $30^{\circ}C$. The optimum medium consists of 38 g/l lactose, 50 g/l tryptose, and 2.8 g/l gallic acid.

• 복식문화연구
• /
• 제17권6호
• /
• pp.960-971
• /
• 2009

The purpose of this study was to observe street fashion, to determine preferred design of jean and to analyze preferred jean styling based on types of jean pants design, toward 20s to 30s women. We observed outfits of jean styles on the street using photography method and conducted a survey to 400 females to get information of consumers. Four hundred questionnaires were analyzed using SPSS. As a result of street research, the majority of people were wearing jean pants with T-shirts, sandal/high heel shoes and totes. The results of market research showed that preferred jean styles were significantly associated with age and marital status. Preferred color of jean pants was also significantly associated with age variable. Current popular jean style was a skinny style. We evaluated results of styling with different jean pants, creating five different images. There was a significant relationship between age/marital status and styling image in different jean styles. In a bootcut style, age variable was significantly associated with different styling images. Generally, most of people responded cute/casual image styling was the best for the bootcut style. In skinny pants, there was a significant association between a residence area and a styling image. Modern/chic image styling with skinny pants was the most favored one. In cropped jean pants, marital status was significantly associated with styling image created. We realized that we can create different images through a styling.

• 한국게임학회 논문지
• /
• 제19권1호
• /
• pp.95-108
• /
• 2019

본 연구의 목적은 게임 중독을 개선하기 위한 게이미피케이션 개발 방법 방향 제언이다. 연구 진행을 위해 782개의 게이미피케이션 사례를 수집했다. 게이미피케이션 개발에 필요한 요소를 분석하기 위해 4F 프로세스를 기반으로 게임 메커닉스와 재미 경험을 분석했다. 분석한 사례를 기반으로 개발 요소 패턴을 분석하기 위해 아프리오리 알고리즘을 적용했다. 연구결과, 게임 메커닉스는 63개의 연관규칙이 발견됐다. 재미 경험은 37개의 연관규칙이 발견됐다. 본 연구 결과를 바탕으로 게임 중독 개선을 위한 게이미피케이션 개발 방향에 대해 제언한다.

• International Journal of CAD/CAM
• /
• 제3권1_2호
• /
• pp.67-75
• /
• 2003

Viewpoint-dependent feature-based modelling in computer-aided design is developed for the purposes of supporting engineering design representation and automation. The approach of this paper uses a combination of a multi-level modelling approach. This has two stages of mapping between models, and the multi-level model approach is implemented in three-level architecture. Top of this level is a feature-based description for each viewpoint, comprising a combination of form features and other features such as loads and constraints for analysis. The middle level is an executable representation of the feature model. The bottom of this multi-level modelling is a evaluation of a feature-based CAD model obtained by executable feature representations defined in the middle level. The mappings involved in the system comprise firstly, mapping between the top level feature representations associated with different viewpoints, for example for the geometric simplification and addition of boundary conditions associated with moving from a design model to an analysis model, and secondly mapping between the top level and the middle level representations in which the feature model is transformed into the executable representation. Because an executable representation is used as the intermediate layer, the low level evaluation can be active. The example will be implemented with an analysis model which is evaluated and for which results are output. This multi-level modelling approach will be investigated within the framework aimed for the design automation with a feature-based model.

• 복식문화연구
• /
• 제30권1호
• /
• pp.16-32
• /
• 2022

In the intensely competitive global fashion market, the use of cultural elements to enhance design has become increasingly widespread. However, there is a lack of research on challenges and opportunities associated with integrating cultural elements of Minhwa into fashion design. Moreover, diverse approaches to incorporate Korean cultural elements into contemporary fashion designs are still needed. This study aims to reveal the real-world challenges relating to the incorporation of Korean cultural elements, including Minhwa, into fashion design and to clarify the possibility of applying Lin's cultural levels to cultural aspects in accordance with experts' views. To establish a theoretical foundation, the literature review on cultural design and Minhwa studies was conducted. It analyzes Minhwa to gain an understanding of the characteristics associated with different cultural levels. In-depth interviews with fashion industry professionals and Minhwa artists were conducted to ascertain their attitudes toward Minhwa use. The study's major findings were threefold. First, the cultural design facilitates the introduction, promotion, understanding, and maintenance of the culture. Since Minhwa offers rich inspiration linked to Korean culture, Minhwa-related designs can provide new perspectives while still having commercial potential. Second, however, the limitations of existing cultural designs included their being outdated, superficial without interpretation, unsophisticated, or limited. Furthermore, the use of Minhwa is limited since it is difficult to avoid creating superficial and unsophisticated designs in the real world. Third, approaching Minhwa at different cultural levels can promote diverse thinking and reduce the challenges of Minhwa use in design, but the major challenge remains visual expression.

• Advances in Computational Design
• /
• 제2권2호
• /
• pp.89-105
• /
• 2017

The AEC industry is highly interested in effective ICT adoption and deployment, including its utilization within the design process. However, its capabilities have not yet been fully exploited and it is an obvious area for further research. Architects and engineers tend to have some technological support to monitor and evaluate the possible impacts of decisions made throughout the design process. Many aspects are left out of consideration and the entire project is broken up into independent fragments or domains that are combined together at a later, post hoc stage. Impact of separate decisions on each others have to be interpreted on a person-to-person basis between the involved design stakeholders. This paper attempts to evaluate current design practice and associated challenges towards design integration with advanced technologies, such as BIM, by conducting an online survey targeted at designers and engineers, who are most affected by its emerging issues. The outcomes of this study are presented and analysed, concluding that the current design process fails to meet expectations and needs improvements. It goes further to propose the requirements for an integrated system as a means for an effective solution for the identified problem.