• 대한치과보철학회지
• /
• 제45권6호
• /
• pp.717-723
• /
• 2007

Statement of problem. Unreasonable distal cantilevered implant-supported prosthesis can mask functional problems of reconstruction temporarily, but it can cause serious strain and stress around its supported implant and surrounding alveolar bone. Purpose. The purpose of this study was to evaluate strain of implants supporting distal cantilevered fixed prosthesis with two different cantilevered length under distal cantilevered static load. Material and methods. A partially edentulous mandibular test model was fabricated with auto-polymerizing resin (POLYUROCK; Metalor technologies, Stuttgart, Swiss) and artificial denture teeth (Endura; Shofu inc., Kyoto, Japan). Two implants-supported 5-unit screw-retained cantilevered fixed prosthesis was made using standard methods with Type III gold alloy (Harmony C&B55; Ivoclar-vivadent, Liechtenstein, Germany) for superstructure and reinforced hard resin (Tescera; Ivoclar-vivadent, Liechtenstein, Germany) for occlusal material. Two strain gauges (KFG-1-120-C1-11L1M2R; KYOWA electronic instruments, Tokyo, Japan) were then attached to the mesial and the distal surface of each standard abutment with adhesive (M-bond 200; Tokuyama, Tokyo, Japan). Total four strain gauges were attached to test model and connected to dynamic signal conditioning strain amplifier (CTA1000; Curiotech inc., Paju, Korea). The stepped $20{\sim}100$ N in 25 N increments, cantilevered static load 8mm apart (Group I) or 16mm apart (Group II), were applied using digital push-pull gauge (Push-Pull Scale & Digital Force Gauge, Axis inc., Seoul, Korea). Each step was performed ten times and every strain signal was monitored and recorded. Results. In case of Group I, the strain values were surveyed by $80.7{\sim}353.8{\mu}m$ in Ch1, $7.5{\sim}47.9{\mu}m/m$ in Ch2, $45.7{\sim}278.6{\mu}m/m$ in Ch3 and $-212.2{\sim}718.7{\mu}m/m$ in Ch4 depending on increasing cantilevered static load. On the other hand, the strain values of Group II were surveyed by $149.9{\sim}612.8{\mu}m/m$ in Ch1, $26.0{\sim}168.5{\mu}m/m$ in Ch2, $114.3{\sim}632.3{\mu}m/m$ in Ch3, and $-323.2{\sim}-894.7{\mu}m/m$ in Ch4. Conclusion. A comparative statistical analysis using paired sample t-test about Group I Vs Group II under distal cantilevered load shows that there are statistical significant differences for all 4 channels (P<0.05).

• 대한치과보철학회지
• /
• 제18권1호
• /
• pp.15-35
• /
• 1980

The purpose of this study was to investigate stresses in the various components of fixed partial dentures restoring the posterior teeth of the lower jaw, and to measure quantitatively the effects of certain modifications in structural design on the stresses in the restorations using two-dimensional photoelasticity. Two-dimensional photoelastic methods were used in this study. Several models of fixed partial dentures were constructed. Shoulder less margins and anatomic occlusal reduction were incorporated in Model 1. Rounded shoulders and flat occlusal reduction were incorporated in Model 2, while Model 3 was a cantilever fixed partial denture. Other similar fixed partial dentures were constructed with V and U notches deliverately included in the region of the fixed joints for comparative reasons. The birefringent materials used in this study were PSM-1 and PSM-5 in standard sheets. PSM-1 was used for constructing the substructure, and PSM-5 was used in making the components of the fixed partial dentures. The two materials were used in the construction of composite photoelastic models. Improved artificial stone was used to represent dental cement in luting the composite photoelastic models. Static loading procedures were used at preplanned sites to represent occlusal loads in the mouth. 35 mm color and B/W film were used to record isochromatics in accordance with photoelastic procedures. Data reduction was performed using the grid method, which helped in, the mathematical integration procedure (Shear difference method) to separate the principal stresses. The results were as follows. 1. Fixed partial dentures do not function in bending as a symmetrical beam. Alternate areas of tension and compression were demonstrated when multiple contact loading was used. 2. The weakest part in posterior fixed partial dentures is the fixed joint. 3. (1) Models I and modified Model I were loaded on the pontic using a 50 pound vertical static load. The shear stress near the posterior fixed joint in Model 1 (U notches) was+129.4 p.s.i., and at the same fixed joint in modified Model 1 (V notches) was+239.4 p.s.i. The concentration of stress in fixed joint was reduced by 50% when U notches replaced the V notches. (2) Modified Model 2 was loaded using a multiple contact loader at a total load of 125 pounds. The difference between the principal stresses (${\sigma}_1-{\sigma}_2$), shear stress, at the V notches was+600 p.s.i., and at the U notches was+3l7 p.s.i. The shear stress was reduced by 50% when U notches replaced the V notches. V-grooves at the fixed joints should be avoided, and should be replaced by regular shaped U-grooves. 4. Cantilever fixed partial dentures had much higher stresses at the fixed joint than fixed partial dentures that were attached at both ends.

• Restorative Dentistry and Endodontics
• /
• 제25권1호
• /
• pp.1-16
• /
• 2000

It is difficult to treat the endodontic apical perforation successfully. In this study, we hypothesized that the application of PDGF-BB and IGF-I into periapical perforation site may accelerate periapical healing and lead to bone deposition. And the specificity of osteonectin in periapical healing was investigated. The experiments were performed on the upper and lower 51 premolar teeth of 4 beagle dogs. The pulp chamber of each tooth was opened and the dental plaque was inserted into the canal for developing the periapical lesion for 5 weeks. Then, the roots were artificially perforated at the apex with the number 4 profile of .06 taper. In each step, standard periapical radiographs were taken to compare the size of lesion each other. The radiographs were scanned and analyzed by image analysis system. The mean and standard deviation of periradicular radiolucency ratios were calculated in each group. ANOVA was used for comparison. 51 premolars were grouped into 3 groups; control group, calcium hydroxide-treated group and calcium hydroxide plus growth factors-treated group. In the control group, the apical perforations were not sealed and obturated with gutta-percha and ZOE sealer by lateral condensation technique. In the experimental groups, the apical perforation were sealed with calcium hydroxide and with/without $4{\mu}g$ of PDGF-BB & IGF-I in cellulose gel and obturated by lateral condensation technique. Fluorescent bone markers were used to measure new bone formation. Following 2, 4, 12 weeks after experiment the dogs were sacrificed and histologic sections were prepared. Each tooth block including periapical lesion was sectioned mesiodistally. One half of the sections were decalcified with 6% nitric acid and processed by standard paraffin embedding technique. The sections were stained by hematoxylin and eosin, and immunostained for osteonectin. Histomorphometrical measurement of neoformed bone was performed using a light microscope. And the other half of the sections were prepared by undecalcified preparation, and confocal laser scanning microscopic investigations were done.

• 비교문화연구
• /
• 제27권
• /
• pp.59-79
• /
• 2012

China and Japan are geographically close and the two countries had shared the Chinese Character Culture and the thoughts of Confucianism, Buddhism and Taoism since the ancient age. They also actively exchanged culture in various areas. Some cultural exchanges had been caused by surrounding environment and culture had been introduced to other country in a natural way; while some cultural exchanges had been forcibly introduced through artificial process. It is believed that such cultural phenomenon must have had impact on the make-up cultures of the two countries and it was assumed that there must have been commons and differences in the make-up cultures of the two countries. This study explored the historical background of the Ching dynasty of China and the Edo Age in Japan, which are in the same time frame, and studied the aesthetic consciousness of the two countries at the time. Then the make-up style of ladies in the two countries had been studied to find out how their aesthetic consciousnesses had been expressed in the make-ups of the two countries. Then the commons and differences in make-up skills between the two countries had been identified. According to the study results, the main stream of aesthetics during the Ching dynasty in China can be classified into Confucianism aesthetics and Taoism aesthetics. On the other hand, the main stream of aesthetics during the Edo Age in Japan can be classified into "mitate(見立)", "ikki(いき)" and "garumi(かるみ). The skin care in the make-up culture of Ching dynasty in China was based on "rouge (?脂, yanzhi)" and "powder(粉, fen)". The Ching ladies loved the make-up style using rouge. It had been same both in the high society and common people. The eyebrow care was delicate and curved so that the feminine beauty with elegant spirit could be emphasized. The lips had been expressed to be smaller and the ladies tried to express elegance and reliability, rather than frail and tender feminine image. The skin care in the make-up culture of Edo Age in Japan focused on even applying of white powder so that the face would look soft. The eyebrow make-up was a very important part of the make-up. The shapes of eyebrow had been advanced in various styles and there had been eyebrow make-up styles such as "crescent-shaped brow (三日月), "crane style brow (鶴眉) and "Tang style brow (唐眉). The lips had been applied of thick red color, imitating the make-up skill of the ladies in the entertainment business. The lips make-up skill expressing the lips in two colors had been quite popular. Among the make-up skills during the Edo Age in Japan, the "black teeth (齒黑)" can be said as the most unique make-up style of Edo Age.

• 구강회복응용과학지
• /
• 제34권4호
• /
• pp.324-330
• /
• 2018

심하게 흡수된 치조제에서 안정적으로 유지될 수 있는 의치를 제작하기 위해서는 적절한 교합의 형성뿐만 아니라 주변근육 조직과의 조화를 고려한 적절한 연마면의 형성에 대한 고려가 필요하다. 중립대 인상 기법을 통해 기능하는 동안 혀, 볼, 입술에 대한 근신경계가 평형을 이루는 잠재적인 영역을 고려하여 인공치아를 배열하고, 연마면 형태가 동적인 근육의 해부학적 형태를 따르도록 할 수 있으며, 이는 의치의 안정과 유지 및 심미성을 향상시킬 수 있다. 본 증례는 심한 잔존 치조제의 흡수를 보이는 환자에게 중립대 개념을 적용하여 기능과 심미적인 측면에서 임상적으로 만족할 만한 결과를 얻었기에 이를 보고하고자 한다.

• 구강회복응용과학지
• /
• 제36권4호
• /
• pp.272-281
• /
• 2020

영구치가 선천 결손된 아동에서 유치가 발거되면, 교정적으로 공간을 폐쇄하거나, 성장이 끝나고 임플란트 수복을 시행할 때까지 공간을 유지하게 된다. 그러나 점차 치조골은 위축되고, 향후 보철 수복을 어렵게 하거나 비심미적인 결과를 야기할 수 있으므로, 임상의는 결손 공간과 치조골의 유지 모두 고려해야 한다. 본 증례에는 2개의 하악 전치가 결손된 환아에서 교정용 골성 고정원을 이용한 임시 보철 수복을 시행한 증례이다. 2개의 골성 고정원을 치조정 2 - 3 mm 하방에 수평으로 식립하였으며, 강선이 삽입된 인공치로 고정하였다. 2년의 경과 관찰동안 치은 염증이나 골성 고정원의 탈락은 발생하지 않았다. 또한 방사선 평가에서 인접 치조골의 성장이 저해되지 않았으며, 치조골 폭경 역시 양호하게 유지되었다.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• 제47권3호
• /
• pp.175-182
• /
• 2021

Objectives: In this prospective randomized controlled trial, we measured the primary and secondary stability of two surface-treated implants placed in the posterior maxilla, applied 3-month loading protocols, and compared and analyzed the short-term outcomes of the implants. Patients and Methods: From June 2018 to June 2019, patients with a residual bone height of 4 mm in the posterior maxilla were enrolled and randomly divided into two groups to place SA implants (Osstem Implants, Korea) in Group A and NH implants (Hiossen, USA) in Group B. Finally, 14 implants placed in 13 patients in Group A and 17 implants placed in 14 patients in Group B were analyzed. The measured primary and secondary stability of each implant was represented by implant stability quotient (ISQ), and treatment outcomes were evaluated. Results: Group A consisted of patients with an average age of 62.2 years (range, 48-80 years), and Group B consisted of patients with an average age of 58.1 years (range, 35-82 years). Primary stability was 73.86±6.40 and 71.24±5.32 in Groups A and B, respectively (P=0.222). Secondary stability was 79.07±5.21 in Group A and 78.29±4.74 in Group B (P=0.667). A steep increase in ISQ during the healing period was observed in Group B, though it was not significant (P=0.265). The mean follow-up period was 378.5±164.6 days in Group A and 385.3±167.9 days in Group B. All implants in each group met the success criteria, and the success rate was 100%. Conclusion: Two surface-treated implants placed in the posterior maxilla with greater than 4 mm alveolar bone height exhibited successful one-year treatment outcomes if a primary stability of 65 or higher ISQ was obtained and a 3-month early loading protocol was applied.

• 대한소아치과학회지
• /
• 제49권2호
• /
• pp.131-139
• /
• 2022

이번 연구는 소아의 인접면 우식을 진단하는데 있어 사용하고 있는 구내방사선 사진에서 심층학습(deep learning) 알고리즘을 활용하여 치아우식을 진단하는 모델의 성능을 평가하고자 하였다. 제1유구치와 제2유구치 사이의 인접면이 포함된 500개의 구내방사선 사진을 대상으로 연구를 시행하였다. 치아우식을 진단하는 모델의 학습에는 Resnet50 기반의 인공신경망 모델을 사용하였다. 평가자료군에서 진단모델의 정확도, 민감도, 특이도를 구하고, ROC 곡선을 얻어 AUC 값을 바탕으로 분류 모델의 성능을 평가하였다. 학습 모델의 정확도는 0.84, 민감도는 0.74, 특이도는 0.94로 나타났으며 AUC는 0.86으로 나타났다. 인공신경망을 기반으로 하는 소아의 구내방사선 사진에서의 인접면 우식의 진단 모델은 비교적 높은 정확도를 보여주었다. 심층학습 모델은 구내방사선 사진상에서 인접면 우식을 진단하는데 있어 향후 치과의사를 보조하는 진단 도구로서 활용될 수 있을 것이다.

• 대한치과보철학회지
• /
• 제61권4호
• /
• pp.284-292
• /
• 2023

안정적인 구치부 교합지지는 적절한 저작기능과 정상적인 안모의 유지를 위해 매우 중요하다. 특히 65세 이상의 고령환자에서는 저작기능이 충분한 영양섭취와 환자의 전신건강에 직접적인 영향을 미친다. 본 증례에서는 상악 무치악, 하악 양측 구치부 치아 상실을 보이는 고령환자의 구치부 교합지지를 회복해주기 위해 상악 총의치를 제작하여 이상적인 교합평면을 설정하였고, 하악 양측 구치부에 컴퓨터 가이드 임플란트 식립 수술을 진행하였다. 임플란트 지지 임시 수복물을 이용한 임플란트 즉시부하를 통해 환자가 수술 후에도 음식 섭취를 원활하게 할 수 있도록 하였다. 하악 구치부 지르코니아 고정성 보철수복을 완료한 후, 상악 총의치 인공치의 교합면을 Cobalt-Chrome계 금속 합금으로 치환하여 마모 저항성을 향상시켰다. 상악 가철성 총의치, 하악 양측 구치부 고정성 보철 치료를 통해 환자의 교합지지와 저작기능을 빠르게 회복해주고, 최종 치료단계에서는 마모에 대한 장기적 안정성도 얻을 수 있었기에 이를 보고하고자 한다.

• 대한치과교정학회지
• /
• 제29권5호
• /
• pp.589-597
• /
• 1999

본 연구는 불소가 유리되는 교정용 전색제의 법랑질 탈회에 대한 효과를 미세경도법을 통해 실험적으로 규명하기 위해 112개의 치아를7개의 군으로 나누어 실험편을 제작한 뒤, 4개의 군에 광중합형 (L1군, L2군)및 자가 중합형 (S1군, S2군) 교정용 전색제인 $FluoroBond^{\circledR}$를 실험편에 도포하고 인공우식용액하에서 실험적으로 처리 완료된 실험편에 Knoop indenter를 부착한 Tukon microhardness tester를 이용해 미세경도를 측정하였고, 이를 KHN(Knoop hardness number)으로 환산하고 조직의 변성 여부를 검색하여 다음과 같은 결과를 얻었다. 1. 법랑질 깊이에 따른 미세경도는 모든군의 $50{\mu}m$ 깊이에서 최소였고, $200{\mu}m$에서 최고인 L2군을 제외한 모든군의 $300{\mu}m$ 깊이에서 최고의 수치를 보였으며, L2, S2군을 제외한 모든군에서 법랑질 깊이가 증가됨에 따라 미세경도치도 증가되었다. 2. 광중합형 및 자가중합형 교정용 전색제 군 모두 어느정도 치아우식에 저항하는 예방효과를 가지고 있었으나 통계학적인 유의성은 없었다(p>0.05). 3. 광중합형 교정용 전색제는 법랑질 깊이 $100{\mu}m,150{\mu}m,200{\mu}m$에서 치아우식 진행 억제효과가 있었다 (p<0.05). 4. 자가중합형 교정용 전색제는 법랑질 깊이 $150{\mu}m$에서 치아우식 진행 억제효과가 있었다 (p<0.05). 5. 광중합형 교정용 전색제 군과 자가중합형 교정용 전색제 군 사이의 법랑질 탈회 억제효과의 차이는 없었다 (p>0.05).