• International Journal of Computer Science & Network Security
• /
• v.21 no.6
• /
• pp.231-236
• /
• 2021

The article assesses the functioning of the DE system or a separate educational institution, where it can be carried out on the basis of developed criteria or on a regulatory basis. The assessment was carried out on the basis of a qualitative and quantitative nature by comparing the actual state of affairs with a certain "ideal" (educational standard), which must be defined and used as a kind of benchmark against which the assessment is made. Conducted an assessment based on a regulatory framework that represents an alternative approach. It has been emphasized that the exceptional difficulty in determining the ideal indicators (norms) of the activities of universities, it has been found that the normative approach, in which the activities of traditional and open universities are compared, taking into account the differences in social, cultural and economic conditions, is the most acceptable.

• International Journal of Computer Science & Network Security
• /
• v.22 no.3
• /
• pp.236-244
• /
• 2022

Network Mobility Basic Support (NEMO BS) protocol has been accredited and approved by Internet Engineering Task Force (IETF) working group for mobility of sub-networks. Trains, aircrafts and buses are three examples of typical applications for this protocol. The NEMO BS protocol was designed to offer Internet access for a group of passengers in a roaming vehicle in an adequate fashion. Furthermore, in NEMO BS protocol, specific gateways referred to Mobile Routers (MRs) are responsible for carrying out the mobility management operations. Unfortunately, the main limitations of this basic solution are pinball suboptimal routing, excessive signaling cost, scalability, packet delivery overhead and handoff latency. In order to tackle shortcomings of triangular routing and Quality of Service (QoS) deterioration, the proposed scheme (Diff-FH NEMO) has previously evolved for end-users in moving network. In this sense, the article focuses on an exhaustive analytic evaluation at Home Agent (HA) entity of the proposed solutions. An investigation has been conducted on the signaling costs to assess the performance of the proposed scheme (Diff-FH NEMO) in comparison with the standard NEMO BS protocol and MIPv6 based Route Optimization (MIRON) scheme. The obtained results demonstrate that, the proposed scheme (Diff-FH NEMO) significantly improves the signaling cost at the HA entity in terms of the subnet residence time, number of mobile nodes, the number of DMRs, the number of LFNs and the number of CNs.

• International Journal of Computer Science & Network Security
• /
• v.22 no.8
• /
• pp.242-248
• /
• 2022

The article presents the analysis of modern methods of automatic comparison of original and unoriginal text to detect textual plagiarism. The study covers two types of plagiarism - literal, when plagiarists directly make exact copying of the text without changing anything, and intelligent, using more sophisticated techniques, which are harder to detect due to the text manipulation, like words and signs replacement. Standard techniques related to extrinsic detection are string-based, vector space and semantic-based. The first, most common and most successful target models for detecting literal plagiarism - N-gram and Vector Space are analyzed, and their advantages and disadvantages are evaluated. The most effective target models that allow detecting intelligent plagiarism, particularly identifying paraphrases by measuring the semantic similarity of short components of the text, are investigated. Models using neural network architecture and based on natural language sentence matching approaches such as Densely Interactive Inference Network (DIIN), Bilateral Multi-Perspective Matching (BiMPM) and Bidirectional Encoder Representations from Transformers (BERT) and its family of models are considered. The progress in improving plagiarism detection systems, techniques and related models is summarized. Relevant and urgent problems that remain unresolved in detecting intelligent plagiarism - effective recognition of unoriginal ideas and qualitatively paraphrased text - are outlined.

• Applied Chemistry for Engineering
• /
• v.33 no.4
• /
• pp.419-424
• /
• 2022

The oxidative degradation performance of the Erionyl Navy R dye was studied in this article. The investigation mainly focused on a comparative study between chemical oxidations by sodium hypochlorite (NaClO) and hydrogen peroxide (H₂O₂), and catalytic oxidations including the Fenton (Fe²⁺-H₂O₂) and Fenton-Like (Fe²⁺/ Fe³⁺/Co²⁺/ Mn²⁺-H₂O₂) or modified Fenton-like (Fe²⁺/ Fe³⁺ -NaClO) reactions. A discoloration and degradation of the Erionyl Navy R occurred after 30 minutes, which varies according to the oxidation system involved; 31%, 54%, <20%, 95%, and >96% losses were observed for Co²⁺-H₂O₂, Mn²⁺-H₂O₂, Fe²⁺-NaClO, Fe³⁺-NaClO), and Fe²⁺-H₂O₂ and Fe³⁺-H₂O₂, respectively.

• Current Optics and Photonics
• /
• v.6 no.1
• /
• pp.32-38
• /
• 2022

Erbium-doped fiber amplifiers (EDFAs) have saturated the technological market but are still widely used in high-speed and long-distance communication systems. To overcome EDFA saturation and limitations, its erbium-doped fiber is co-doped with other materials such as zirconia and bismuth. This article demonstrates and compares the performance using three different fibers as the gain medium for zirconia-erbium-doped fibers (Zr-EDF), bismuth-erbium-doped fibers (Bi-EDF), and commercial silica-erbium-doped fibers (Si- EDF). The optical amplifier was configured with a double-pass amplification system, with a broadband mirror at the end of its configuration to allow double-pass operation in the system. The important parameters in amplifiers such as optical properties, optical amplification and noise values were also examined and discussed. All three fibers were 0.5 m long and entered with different input signals: 30 dBm for low input and 10 dBm for high input. Zr-EDF turned out to be the most relevant optical amplifier as it had the highest optical gain, longest transmission distance, highest average flatness gain with minimal jitter, and relevant noise figures suitable for the latest communication technology.

• Geomechanics and Engineering
• /
• v.32 no.5
• /
• pp.503-512
• /
• 2023

In tunneling projects, a significant part of the costs is spent on segment production. By more economically producing, the cost of tunnel construction can be greatly reduced, especially in long and large-diameter tunnels. In the present study, the effect of using the Carousel method in the improvement of the production system performance compared to the conventional Static system has been studied. To carry out the research, a quantitative comparison of cost and production time was carried out for two production methods using the available documentation. The opinions of experts have been obtained using questionnaires and qualitative comparison of cost, time and production quality was done by implementation of statistical analysis. The SPSS software and the univariate t-test were used to analyze the questionnaires. According to the results of statistical analysis with SPSS, the use of the Carousel method will reduce production time and costs along with increasing manufacturing quality. According to the documentation analysis, the Carousel method reduces the cost of production by almost 30% and leads to a reduction of the production time to approximately 40% of the Static moulds system. The Carousel method has a higher production rate, efficiency, and better performance. Research into quantifying the benefits of Carousel method in the production system performance is very limited. This comparison is based on real information from the under construction Tabriz Metro project. This article can be very helpful in choosing the best production method.

• Safety and Health at Work
• /
• v.14 no.1
• /
• pp.107-117
• /
• 2023

Background: Thermophysiological comfort in a cold environment is mainly ensured by clothing. However, the thermal performance and protective abilities of textile fabrics may be sensitive to extreme environmental conditions. This article evaluated the thermal insulation properties of three technical textile assemblies and determined the influence of environmental parameters (temperature, humidity, and wind speed) on their insulation capacity. Methods: Thermal insulation capacity and air permeability of the assemblies were determined experimentally. A sweating-guarded hotplate apparatus, commonly called the "skin model," based on International Organization for Standardization (ISO) 11092 standard and simulating the heat transfer from the body surface to the environment through clothing material, was adopted for the thermal resistance measurements. Results: It was found that the assemblies lost about 85% of their thermal insulation with increasing wind speed from 0 to 16 km/h. Under certain conditions, values approaching 1 clo have been measured. On the other hand, the results showed that temperature variation in the range (-40℃, 30℃), as well as humidity ratio changes (5 g/kg, 20 g/kg), had a limited influence on the thermal insulation of the studied assemblies. Conclusion: The present study showed that the most important variable impacting the thermal performance and protective abilities of textile fabrics is the wind speed, a parameter not taken into account by ISO 11092.

• Advances in environmental research
• /
• v.12 no.1
• /
• pp.17-40
• /
• 2023

This article presents studies of the adsorption process in a continuous system of fluoride solutions at a concentration of 30 mg/L using a bone char packed in fixed-bed columns, as well as regeneration studies in the same system using HNO₃, HCl and NaOH at 0.01, 0.1 and 1 M. The Thomas Model, Artificial Neural Networks (ANNs), Numerical Integration and Mass Transfer Zone were used for the modeling of asyemmetrical breakthrough curves obtained from the fluoride adsorption on bone char. The maximum adsorption capacity of the breakthrough curves was estimated, and various design parameters of the columns were obtained for the different operating conditions. Results showed that an improvement in the modeling capabilities of the Thomas model can be obtained using ANNs. Moreover, ANNs are useful for determining reasonable and accurate design parameters of packed-bed adsorption columns. This modeling approach can be useful for the process system engineering of dynamic adsorption systems involved in the field of water treatment and purification. It is important to highlight that the obtained results indicate that, when using HCl or HNO₃ at a concentration of 0.1 M, a large number of adsorption-desorption cycles are obtained and, therefore, the highest values of adsorption capacity, which leads to a reduction in operation costs.

• Journal of the Society of Naval Architects of Korea
• /
• v.60 no.3
• /
• pp.146-154
• /
• 2023

Efforts have been made to reduce the greenhouse gas emissions from ships by limiting the energy efficiency index, and net zero CO₂ emission was proposed recently. The most ideal measure to achieve zero emission ship is electrification, and fuel cells are considered as a practical power source of the electrified propulsion system. The electric efficiency in the electrochemical reaction of fuel cells can be achieved up to 60% practically. The remaining energy is converted to heat energy but most of them are dissipated by cooling. In the author's previous research, a hybrid propulsion system utilizing not only electricity but also heat was introduced by combining electric motor and steam turbine. In this article, long term efficiency is evaluated for the introduced hybrid propulsion system by considering a virtual 24,000 TEU class container carrier model. To reflect a more practical operating condition, the actual navigation data of a similar real ship in the real world were collected from automatic identification system data and applied. From the result, the overall efficiency of the hybrid propulsion system is expected to be higher than a conventional electric propulsion fuel cell ship by 30%.

• Journal of Digestive Cancer Research
• /
• v.10 no.1
• /
• pp.22-30
• /
• 2022

Immune checkpoint inhibition has been established as a new treatment option for various types of carcinoma, and many clinical trials are being actively conducted as a treatment for advanced or metastatic gastric cancer, either as a monotherapy with an immune checkpoint inhibitor or as a combination therapy with standard chemotherapy. In the CheckMate-649 clinical trial to confirm the efficacy of the combination of nivolumab and chemotherapy (FP) in advanced gastric cancer and gastroesophageal junction cancer, nivolumab group showed improvement in overall survival in programmed death ligand 1-positive cancer patients compared with placebo group. Also, the combination therapy of pembrolizumab, trastuzumab and chemotherapy (FP) in first-line treatment was tested through the KEYNOTE-811 trial. The pembrolizumab group showed 22.7% of improvement in objective response rate compared with placebo group. Accordingly, the combination of nivolumab/pembrolizumab with standard chemotherapy was approved for the first-line treatment. In KEYNOTE-059 trials for patients with progressive disease after at least two lines of chemotherapy, pembrolizumab monotherapy showed improvement in objective response rate and overall survival, and the use of pembrolizumab was approved for the third-line or more treatment. In this article, we review the result of clinical trials related to immune checkpoint inhibitors that have been recently introduced in the treatment of gastric cancer.