• Korean Institute of Interior Design Journal
• /
• v.25 no.6
• /
• pp.61-69
• /
• 2016

A study on how fire officer's job satisfaction factors influence space satisfaction rates. This article will conduct regression analysis for the study on these three problems. 'What are the factors of fire officer's job satisfaction?', 'Does space satisfaction rates influence job satisfaction rates?', 'Which job satisfaction factor influence space satisfaction rate?' Therefore, variables were set based on the prior study, and before regression analysis was conducted, variables were purified through analysis on primary factor and reliability analysis, and hypothesis test was done via variable calculation. According to the prior study, factors that influence job satisfaction rates are as following; self-regulation of tasks, ethics and responsibility level, relationship with colleagues, job identity. And regression analysis showed that space satisfaction rates do not influence job satisfaction rates. The writer thinks that it's showing that Korean fire officers tend to prioritize colleague relationship and job identity over space improvements. And the factor that influence job satisfaction rates turned out to be the self-regulation of tasks, and the writer estimates that it's reflecting the hierarchical organization culture of current Korean fire officers. Therefore, future Korean fire station design plans need to consider a space plan that provides fire officer's private self-regulation of tasks.

• Journal of Powder Materials
• /
• v.15 no.1
• /
• pp.37-45
• /
• 2008

This article presents the challenges toward the successful consolidation of $Al_2O_3$ nanopowder using magnetic pulsed compaction (MPC). In this research the ultrafine-structured $Al_2O_3$ bulks have been fabricated by the combined application of magnetic pulsed compaction (MPC) and subsequent sintering, and their properties were investigated. The obtained density of $Al_2O_3$ bulk prepared by the combined processes was increased with increasing MPC pressure from 0.5 to 1.25 GPa. Relatively higher hardness and fracture toughness in the MPCed specimen at 1.25 GPa were attributed to the retention of the nanostructure in the consolidated bulk without cracks. The higher fracture toughness could be attributed to the crack deflection by homogeneous distribution and the retention of nanostructure, regardless of the presence of porosities. In addition, the as consolidated $Al_2O_3$ bulk using magnetic pulsed compaction showed enhanced breakdown voltage.

• The Korean Journal of Health Service Management
• /
• v.10 no.2
• /
• pp.155-166
• /
• 2016

Objectives : This study confirmed the limitation of long-term care insurance by analyzing media contents. Methods : Articles and reviews were searched with the article searching system (KINDS) from July 2008 to December, 2015. Results : Among the 155 articles examined, 61.1% highlighted the faults of suppliers, and 25.2% indicated the responsibility of the insurer. As for their purpose, 56.8% reported on accidents, and 32.3% provided information. Furthermore, 74.2% reported on negative contents and only 25.8% on neutral contents. The negative contents consisted of requesting false insurance benefits, amending the range and price indicating the very low salaries of the care givers, limitations on the care grade assessment, and problems related with assistive devices. The majority of neutral articles is for providing information. Conclusions : There were many problems starting from the early stage of the insurance. We must pay attention to these problems. Moreover, we should try to handle and prevent these problems with supportive responses from authorities.

• Smart Structures and Systems
• /
• v.25 no.4
• /
• pp.409-422
• /
• 2020

This article deals with the flexural analysis of anti-symmetric cross-ply laminated plates under nonlinear thermal loading using a refined plate theory with four variables. In this theory, the undetermined integral terms are used and the number of variables is reduced to four, instead of five or more in other higher-order theories. The boundary conditions on the top and the bottom surfaces of the plate are satisfied; hence the use of the transverse shear correction factors is avoided. The principle of virtual work is used to obtain governing equations and boundary conditions. Navier solution for simply supported plates is used to derive analytical solutions. For the validation of the present theory, numerical results for displacements and stresses are compared with those of classical, first-order, higher-order and trigonometric shear theories reported in the literature.

• Journal of Adhesion and Interface
• /
• v.21 no.2
• /
• pp.41-50
• /
• 2020

Organic-inorganic metal halide perovskite has shown a great promise in photovoltaic applications because of the skyrocketing power-conversion efficiencies up to 25.2% and their potentially low production cost. However, it also has critical issue of substantial material degradation during device operation to be overcome for successful commercialization. Understanding the nature of defects and their photochemistry related to material degradation is needed. Furthermore, strategy to passivate defects in perovskite should be adopted to improve the stability of perovskite. In this article, we present predominant defects formation in perovskite that contribute to material degradations in perovskite solar cells. We then discuss how material stability can be improved through reliable defect passivation engineering.

• Journal of Fisheries and Marine Sciences Education
• /
• v.25 no.2
• /
• pp.448-457
• /
• 2013

The media is an effective means of preventing crime. It can be known to members of the media presiding over the most widely and rapidly. Because of this, the mass media is a good way to prevent such crime. Related to general crime, marine crime will have unique characteristics and about Crimes reported by the media, it is also true. The results of this study are as follows. Firstly, it is required that the more accurate present article must be published and reported. Secondly, for more accurate presentation of measure, there is a need to enhance professional training for reporters. Thirdly, the marine weather report is the most important political purpose of considering marine crime prevention. Forthly, marine crime is likely to be a lack of evidence. Therefore, in order to supplement the lack of evidence maritime security agency should be utilized for a news source.qualification Fifthly, the need for regular inspection of the articles is requested. Sixthly, for judicial control maintenance of the media related laws should be strengthened. Finally, the arbitration institution for media rights should be established under the Korea Ministry of Land Infrastructure and Transport. This is practical action for marine crime prevention.

• Journal of Technology Innovation
• /
• v.25 no.4
• /
• pp.17-45
• /
• 2017

This article reviews studies on the societal challenge and technological innovation. Technological innovation in response to social problems is a relatively recent topic of Innovation Studies. Socially-oriented innovations and policies are different in terms of the goals, innovation processes, and ecosystems when compared with industrial innovation. This study examines the existing research that discusses science and technology innovation from the viewpoint of solving societal problems and discusses the direction of future research. This paper presents major research issues on the characteristics of innovation in societal problem solving, innovation governance, roles and ecosystem of innovators, and relationship between societal problem solving policies and other policies.

• Atmosphere
• /
• v.25 no.3
• /
• pp.407-433
• /
• 2015

First half of my article focused on analyzing the current state of historical materials regarding weather and climate, and established a list of weather-related historical literature collection of Korea with which to make a lexical approach to the situations of all kinds of weather literature. It also put emphasis on gathering information and data of weather logs from journal-type historical records which were contained in 48 weather-related journals of Choseon period. The results of this research are expected to be useful for the activation of study in historical meteorology. The latter half of my research focused on analyzing various meteorological states of sunny, cloudy, rainy, snowy and frosty weather which were recorded in the official Annals of King Kojong (1864~1907). And it re-verified historical rainfall data of preceding researches of Wada Yuji (1917), Jung-Lim (1994), Jhun-Moon (1997). In result, different records were found between data of theirs and mine. It means that we have to analyze and reconstruct newly the meteorological data of the Annals of King Gojong and the Daily Records of Royal Sungjungwon (1623~1910) during the late Choseon period.

• Geomechanics and Engineering
• /
• v.3 no.3
• /
• pp.207-218
• /
• 2011

This article describes laboratory research done on strength evaluations for stabilized samples made of tropical fibrous peat. The stabilizing agents used were ordinary Portland cement (OPC) as binding agent and blast furnace slag (BFS) as additive. Stabilized samples were tested for their strength through unconfined compressive strength (UCS) and California bearing ratio (CBR). Different dosage rates of OPC and BFS were used in trial and error experiments for the most effective combination for stabilized peat samples that were at their natural moisture content. Stabilized trial samples were air cured for 90 days. After detecting the most effective dosage rate in the trial samples, their values were used to prepare CBR samples at their optimum moisture content (OMC). CBR samples were then air cured from 1 to 90 days and tested under un-soaked and soaked conditions. The most effective dosage rate for the stabilized peat samples was found to be close to when 75% for OPC and 25% of BFS per total weight of OPC, and BFS. As an example, if 11.25% OPC, and 3.75% BFS are mixed with peat and compacted at their OMC and air cured for 90 days, stabilized peat will have an increase in CBR of 0.8% to 45 % for un-soaked and 20% for soaked conditions.

• Computers and Concrete
• /
• v.25 no.3
• /
• pp.205-214
• /
• 2020

Cytoskeleton components in living cell bear large compressive force and are responsible in maintaining the cell shape. Actually these filaments are surrounded by viscoelastic media within the cell. This surrounding, viscoelastic media affects the buckling behavior of these filaments when external force is applied on these filaments by exerting continuous pressure in opposite directions to the incipient buckling of the filaments. In this article a mechanical model is applied to account the effects of this media on the buckling behavior of intermediate filaments network of cytoskeleton. The model immeasurably associates; filament's bending rigidity, adjacent system elasticity, and cytosol viscosity with buckling wavelength, buckling growth rate and buckling amplitude of the filaments.