• Journal of Korean Neurosurgical Society
• /
• v.59 no.3
• /
• pp.322-324
• /
• 2016

To introduce a new device for catheter placement of an external ventricular drain (EVD) of cerebrospinal fluid (CSF). This device was composed of three portions, T-shaped main body, rectangular pillar having a central hole to insert a catheter and an arm pointing the tragus. The main body has a role to direct a ventricular catheter toward the right or left inner canthus and has a shallow longitudinal opening to connect the rectangular pillar. The arm pointing the tragus is controlled by back and forth movement and turn of the pillar attached to the main body. Between April 2012 and December 2014, 57 emergency EVDs were performed in 52 patients using this device in the operating room. Catheter tip located in the frontal horn in 52 (91.2%), 3rd ventricle in 2 (3.5%) and in the wall of the frontal horn of the lateral ventricle in 3 EVDs (5.2%). Small hemorrhage along to catheter tract occurred in 1 EVD. CSF was well drained through the all EVD catheters. The accuracy of the catheter position and direction using this device were 91% and 100%, respectively. This device for EVD guides to provide an accurate position of catheter tip safely and easily.

• Journal of the Korean Society of Industry Convergence
• /
• v.7 no.2
• /
• pp.193-198
• /
• 2004

This is the dissertation of the study of design characteristics about the practical flexible manufacturing system (PFMS). The basic ideas to analyze the manufacturing system which is the automatically operated is dependant on the various manufacturing procedures in factory. PFMS is the very useful equipment for students and trainee of production lines. This system is composed of hardware and software sub systems i.e. control and test unit and personal computer with software. The PFMS can be developed with design concepts and approved the capability of first article with functional tests. The PFMS module will be very useful for the manufacturing drill system in universities and practical fields. The flexible manufacturing systems have various subsystems appropriated for the final manufacturing products. Therefore the systems have the various kinds of hard wares as well as softwares. We study the software for the practical flexible manufacturing system designed in the Halla University and specially the design concept and using specification of the SCARA (Selective Compliance Assembly Robot Arm) robot which is used for the movement of the product is analyzed and introduced in this dissertation.

• Proceedings of the ESK Conference
• /
• 1994.04a
• /
• pp.115-123
• /
• 1994

A man model can be used as an effective tool to design ergomonically sound products and workplaces, and subsequently evaluate them properly. For a man model to be truly useful, it must be integrated with a posture prediction model which should be capable of representing the human arm reach posture in the context of equipments and workspaces. Since the human movement possesses redundant degrees of freedom, accurate representation or prediction of human movemtn was known to be a difficult problem. To solve this redundancy problem, the psychophysical cost function can predict the arm reach posture accurately. But the joint discomfort that human feels at the joint can not be predicted since the effects of external factors on the joint discomfort is not known. In this study a psychophysical experi- ment using the magnitude estimation technique was performed to evaluate the effects of external factors such as joint, joint angle and Perceived Exertion Ratio on the joint discomfort. Results showed that the joint discomfort increased as the Perceived Exertion Ratio increased, but the relation is not linear and was affected not only by the joint but also by the joint angle for the same Perceived Exertion Ratio. The interaction effect of the joint and the joint angle was also significant. From the results it is needed to develope the cost function which can predict the joint discomfort considering the joint, joint angle and external load.

• PNF and Movement
• /
• v.16 no.3
• /
• pp.495-503
• /
• 2018

Purpose: This study analyzes the predictive power of upper extremity activity and the activities of daily living in patients with stroke using an easy-to-use evaluation tool. Methods: The Fugl-Meyer assessment (FMA) of the upper extremity and action research arm test (ARAT) are performed, and the Korean modified Barthel index (K-MBI) is measured. The predictive power of the upper extremity activity level and the daily activity level are analyzed using regression analysis. The statistical significance level is 0.05. Results: The coefficient of determination, R2, for predicting the ARAT using FMA was high at 0.88, but the regression equation for predicting the K-MBI using the FMA and ARAT did not show a statistically significant difference. Conclusion: The assessment of the upper extremity should be performed at the activity level, as well as the impairment level. The assessment for predicting the activities of daily living should be carried out for each level of the international classification of functioning (ICF), disability, and health, which can be linked to daily life, in addition to the assessment of the upper arm. Future research should conduct more diverse analyses using the ICF assessment tools at various levels.

• The Journal of Korea Robotics Society
• /
• v.14 no.2
• /
• pp.81-86
• /
• 2019

Robots are used in various industrial sites, but traditional methods of operating a robot are limited at some kind of tasks. In order for a robot to accomplish a task, it is needed to find and solve accurate formula between a robot and environment and that is complicated work. Accordingly, reinforcement learning of robots is actively studied to overcome this difficulties. This study describes the process and results of learning and solving which applied reinforcement learning. The mission that the robot is going to learn is bottle flipping. Bottle flipping is an activity that involves throwing a plastic bottle in an attempt to land it upright on its bottom. Complexity of movement of liquid in the bottle when it thrown in the air, makes this task difficult to solve in traditional ways. Reinforcement learning process makes it easier. After 3-DOF robotic arm being instructed how to throwing the bottle, the robot find the better motion that make successful with the task. Two reward functions are designed and compared the result of learning. Finite difference method is used to obtain policy gradient. This paper focuses on the process of designing an efficient reward function to improve bottle flipping motion.

• PNF and Movement
• /
• v.20 no.3
• /
• pp.321-329
• /
• 2022

Purpose: The purpose of this study was to compare the immediate effect on the change in muscle stiffness in the common extensor muscle (CEM) when using the spiral taping method to promote proprioception. Methods: There were 18 participants in this study. CEM stiffness was measured using a MyotonePRO device with the subject in a sitting position and according to the proprioceptive neuromuscular facilitation (PNF) arm pattern. Elastic tape was used as the material for the three taping methods employed in the study: kinesiotaping (KT), right spiral taping (RST), and left spiral taping (LST). The taping methods were applied to the wrist extensor muscle with elongation position. Additionally, when performing PNF arm patterns, spiral taping in diagonal and spiral directions was used to promote CEM proprioceptors. The change in CEM stiffness was compared with the initial data values. Results: The results of this study were obtained by comparing and measuring changes in CEM stiffness using three different tapings. It was found that the stiffness change of the CEM was significant compared to the initial value, and the increase in stiffness of the CEM after RST application was also significant. Conclusion: The results of this study show that by affecting the strength and activation of the extensor muscle, taping performed through the RST method had the most positive effect on the change in CEM stiffness.

• The korean journal of orthodontics
• /
• v.37 no.2 s.121
• /
• pp.98-113
• /
• 2007

Objective: The purpose of this study was to evaluate the displacement pattern and the stress distribution shown on a finite element model 3-D visualization of a dry human skull using CT during the retraction of upper anterior teeth. Methods: Experimental groups were differentiated into 8 groups according to corticotomy, anchorage (buccal: mini implant between the maxillary second premolar and first molar and second premolar reinforced with a mini Implant, palatal: mini implant between the maxillary first molar and second molar and mini implant on the midpalatal suture) and force application point (use of a power arm or not). Results: In cases where anterior teeth were retracted by a conventional T-loop arch wire, the anterior teeth tipped more postero-inferiorly and the posterior teeth moved slightly in a mesial direction. In cases where anterior teeth were retracted with corticotomy, the stress at the anterior bone segment was distributed widely and showed a smaller degree of tipping movement of the anterior teeth, but with a greater amount of displacement. In cases where anterior teeth were retracted from the buccal side with force applied to the mini implant placed between the maxillary second premolar and the first molar to the canine power arm, it showed that a smaller degree of tipping movement was generated than when force was applied to the second premolar reinforced with a mini implant from the canine bracket. In cases where anterior teeth were retracted from the palatal side with force applied to the mini implant on the midpalatal suture, it resulted in a greater degree of tipping movement than when force was applied to the mini implant between the maxillary first and second molars. Conclusion: The results of this study verifies the effects of corticotomies and the effects of controlling orthodontic force vectors during tooth movement.

• Journal of Physiology & Pathology in Korean Medicine
• /
• v.29 no.4
• /
• pp.337-346
• /
• 2015

Sprain is the injury of meridian-muscle, and is caused by qi and blood obstruction or regional stagnation of qi and blood. So we take the channel points where pain flows. If we take the locations that feel pain, those locations are treatments points and ashi points. So we searched over the ashi points appearing on the patients with wrist sprain. Ashi points appeared on LI5, TE4, SI5 around wrist joints, LI10, LI11, LU6 around elbow joints, LI14, LU3, LU4, PC2 around upper arm. Also, ashi points appeared much on ST17, KI23, PC1, SP18, ST18 around thoracic region, and, on BL15, BL44, BL13 around anterior and thoracodorsal region, in order stated. Ashi points of the highest frequency appeared on LI14 around upper arm, and on LI5, TE4 around wrist joint, and SI5, ST17, KI12, PC1, SP18 appeared with second highest frequency. And ashi points on elbow points and thoracodorsal region appeared with the same frequency. Therefore, it is possible for us to know that the pain location appears in order of upper arm, anterior thoracic region, elbow joint region, and, thoracodorsal region, in treating wrist joints. There was a tendency that pain and movement disturbance recovered more quickly, depending on the pain reduction, as we found out the ashi points closely from stagnated qi and blood caused by wrist arthritis, and relaxed the stiff location. Rubbing treatments in treating pain ashi points is considered to play an important role to reduce pain effectively, so it is necessary to make a further study.

• Journal of the Korean Home Economics Association
• /
• v.17 no.4
• /
• pp.1-14
• /
• 1979

The functional problems of the basic pattern of clothing are a matter of the first importance to clothing construction. Therefore, the ergonomic analysis of the expansion and contraction of the upper body surface, due to motion, has become required. thus in order to obtain the measurements and rate of expansion and contraction of the upper body surface following from its motions, the development figure of " Shell" and somatometry were employed. The results obtained through the investigation can be summarized as follows : 1) According to the developmental figures of "Shell" the latitudes centering around the shoulder line present contractive tendencies by arm movement. The longitudes around the center back waist length are expansive tendencies when bent forward. In the case of a 15$^{\circ}$ lean backward posture, the longitudes around the center front waist length are expansive tendencies. 2) By somatometry, the region from the scapula to the axilla point the upper back with presents the greatest expansion (more than 30%). The region from scapla to arm presents the maximum rate of contraction. In considering the longitude , under the axilla waist length and the bust point waist length generally shows the greatest rate of expansion. 3) The bust point waist length and under the axilla waist length are of great importance to the basic pattern of clothing. and have expansive tendencies(6.3cm). Among the latitudes, the upper back width has the greatest tendency for expansion (7.83 cm). 4) The region which presents the greatest rate of the expansion and contraction is in the proximity of the arm. These results testify that the amount of room of the back width must be given consideration in constructing the basic pattern of clothing.pattern of clothing.

• Journal of the Korea Convergence Society
• /
• v.9 no.5
• /
• pp.239-246
• /
• 2018

In this study, we analyzed the balance of the both legs and the kinematic analysis of the upper limb segments and joints during archery shooting and compared the differences according to the scores. 9 K-university elite archery athletes participated. Each archer was asked to shoot 3-shots and 5-ends on a 122 cm target at a distance of 70 m. Seven infrared cameras (Qualisys, sweden) and two force plates (Kistler, Switerland) were used to calculate the upper limb segments and joint movements and the center of pressure (COP). When the archers shot 8 points, range of motion of elbow joint angle on drawing-arm and mediolateral COP range of motion on the left foot were larger than when 9-10 points were shot (p<.05). In order to maintain a high score in the archery game, constant balance is required, and the balance of the left foot supporting the bow during the shooting is an important factor. In addition, minimizing elbow joint movement of the drawing-arm supporting the bow will help stabilized shooting.