• Progress in Superconductivity
• /
• 제7권2호
• /
• pp.109-113
• /
• 2006

The Arithmetic Logic Unit (ALU) is a core element of a computer processor that performs arithmetic and logic operations on the operands in computer instruction words. We have developed and tested an RSFQ multi-bit ALU constructed with half adder unit cells. To reduce the complexity of the ALU, We used half adder unit cells. The unit cells were constructed of one half adder and three de switches. The timing problem in the complex circuits has been a very important issue. We have calculated the delay time of all components in the circuit by using Josephson circuit simulation tools of XIC, $WRspice^{TM}$, and Julia. To make the circuit work faster, we used a forward clocking scheme. This required a careful design of timing between clock and data pulses in ALU. The designed ALU had limited operation functions of OR, AND, XOR, and ADD. It had a pipeline structure. The fabricated 1-bit, 2-bit, and 4-bit ALU circuits were tested at a few kilo-hertz clock frequency as well as a few tens giga-hertz clock frequency, respectively. For high-speed tests, we used an eye-diagram technique. Our 4-bit ALU operated correctly at up to 5 GHz clock frequency.

• 한국정보통신학회논문지
• /
• 제17권8호
• /
• pp.1891-1898
• /
• 2013

3차원 그래픽 API인 OpenGL과 Direct3D를 효율적으로 처리하기 위해 sine, cosine, 역수, 역제곱근, 지수 및 로그 연산을 처리하는 부동소수점 연산회로를 설계하였다. 고속 연산과 2 ulp 보다 작은 오차를 만족시키기 위해 2차 최대최소 근사 방식과 테이블 룩업 방식을 사용하였다. 설계된 회로는 65nm CMOS 표준 셀 조건에서 2.3-ns의 최대 지연시간을 갖고 있으며, 약 23,300 게이트로 구성된다. 최대 400 MFLOPS의 연산 성능과 높은 정밀도로, 설계한 연산회로는 3차원 모바일 그래픽 분야에 효율적으로 적용 가능하다.

• 대한수학회논문집
• /
• 제38권2호
• /
• pp.355-364
• /
• 2023

In this paper, we investigate the sums of the elements in the finite set $\{x^k:1{\leq}x{\leq}{\frac{n}{m}},\;gcd_u(x,n)=1\}$, where k, m and n are positive integers and gcd_u(x, n) is the unitary greatest common divisor of x and n. Moreover, for some cases of k and m, we can give the explicit formulae for the sums involving some well-known arithmetic functions.

• 전자공학회논문지C
• /
• 제34C권11호
• /
• pp.20-28
• /
• 1997

In this paper, quantization and inverse quantizatio unit, a sa component of MPEG-2 moving picture compression system, ar edesigned. In the processing of quantization, this design adopted newly designed arithmetic units in which quantization matrices and scale code was expressed with SD(signed-digit) code. In the arithmetic unit of inverse quantization, quantization scale code, which has 5-bits length, is splited into two pieces; 2-bits for control code, 3-bits for quantization data, and the method to devise quantization step size is proposed. The design was coded with VHDL and synthesis results in that it consumed about 6,110 gates, and operating speed is 52MHz.

• 한국통신학회:학술대회논문집
• /
• 한국통신학회 1986년도 춘계학술발표회 논문집
• /
• pp.177-180
• /
• 1986

A high performance Butterfly Arithmetic Unit for FFT processor using two adders is proposed in this papers, which is Based on the distributed and merged arithmetic. Due to simple and easy architecture to implement, this proposed processor is well suited to systolic FFT processor. Simulation was performance using YSLOG (Yonsei logic simulator) on IBM AT computer, to verify logic. By using 3um double Metal CMOS technology,Butterfly arithmetic have been achieved in 1.2 usec.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 추계학술대회 논문집 학회본부 B
• /
• pp.778-780
• /
• 1999

Arithmetic unit speed depends strongly on the algorithms employed to realize the basic arithmetic operations.(add, subtract multiply, and divide) and on the logic design. Recent advances in VLSI have increased the feasibility of hardware implementation of floating point arithmetic units and microprocessors require a powerful floating-point processing unit as a standard option. This paper describes the design of floating-point multiplier for IEEE 754-1985 Single-Precision operation. Booth encoding algorithm method to reduce partial products and a Wallace tree of 4-2 CSA is adopted in fraction multiplication part to generate the $32{\times}32$ single-precision product. New scheme of rounding and sticky-bit generation is adopted to reduce area and timing. Also there is a true sign generator in this design. This multiplier have been implemented in a ALTERA FLEX EPF10K70RC240-4.

• Korean Journal of Mathematics
• /
• 제30권2호
• /
• pp.315-333
• /
• 2022

We give a general procedure to analyze the structure for certain ℂ-Fuchsian subgroups of some non-arithmetic lattices. We also show their presentations and describe their fundamental domains which lie in a complex geodesic, a set homeomorphic to the unit disk.

• 대한전자공학회논문지
• /
• 제25권9호
• /
• pp.1115-1124
• /
• 1988

A two-dimensional systolic array for fast Fourier transform, which has a regular and recursive VLSI architecture is presented. The array is constructed with identical processing elements (PE) in mesh type, and due to its modularity, it can be expanded to an arbitrary size. A processing element consists of two data routing units, a butterfly arithmetic unit and a simple control unit. The array computes FFT through three procedures` I/O pipelining, data shuffling and butterfly arithmetic. By utilizing parallelism, pipelining and local communication geometry during data movement, the two-dimensional systolic array eliminates global and irregular commutation problems, which have been a limiting factor in VLSI implementation of FFT processor. The systolic array executes a half butterfly arithmetic based on a distributed arithmetic that can carry out multiplication with only adders. Also, the systolic array provides 100% PE activity, i.e., none of the PEs are idle at any time. A chip for half butterfly arithmetic, which consists of two BLC adders and registers, has been fabricated using a 3-um single metal P-well CMOS technology. With the half butterfly arithmetic execution time of about 500 ns which has been obtained b critical path delay simulation, totla FFT execution time for 1024 points is estimated about 16.6 us at clock frequency of 20MHz. A one-PE chip expnsible to anly size of array is being fabricated using a 2-um, double metal, P-well CMOS process. The chip was layouted using standard cell library and macrocell of BLC adder with the aid of auto-routing software. It consists of around 6000 transistors and 68 I/O pads on 3.4x2.8mm\ulcornerarea. A built-i self-testing circuit, BILBO (Built-In Logic Block Observation), was employed at the expense of 3% hardware overhead.

• Journal of information and communication convergence engineering
• /
• 제9권4호
• /
• pp.435-440
• /
• 2011

This paper propose the method of constructing the highly efficiency adder and multiplier systems over finite fields. The addition arithmetic operation over finite field is simple comparatively because that addition arithmetic operation is analyzed by each digit modP summation independently. But in case of multiplication arithmetic operation, we generate maximum k=2m-2 degree of ${\alpha}^k$ terms, therefore we decrease k into m-1 degree using irreducible primitive polynomial. We propose two method of control signal generation for the purpose of performing above decrease process. One method is the combinational logic expression and the other method is universal signal generation. The proposed method of constructing the highly adder/multiplier systems is as following. First of all, we obtain algorithms for addition and multiplication arithmetic operation based on the mathematical properties over finite fields, next we construct basic cell of A-cell and M-cell using T-gate and modP cyclic gate. Finally we construct adder module and multiplier module over finite fields after synthesizing ${\alpha}^k$ generation module and control signal CSt generation module with A-cell and M-cell. Next, we constructing the arithmetic operation unit over finite fields. Then, we propose the future research and prospects.

• 전기전자학회논문지
• /
• 제17권3호
• /
• pp.346-351
• /
• 2013

모바일 시스템에서는 비용 및 전력 효율이 중요하기 때문에 부동소수점 연산기 개발 시 32-비트 데이터 형식대신 24-비트 데이터 형식을 사용하는 것이 좋다. 하지만 24-비트 데이터 형식을 사용할 경우 32-비트 데이터 형식에 비해 연산기의 정확도가 낮아질 수 있다. 3D 그래픽과 같이 연속적인 부동소수점 연산 처리가 많이 요구될 경우 연산기의 정확도에 대한 논의와 검증이 중요하다. 나눗셈은 3D 그래픽에 사용되는 연산 중 OpenGL에서 규정한 정확도를 만족하기 가장 어려운 연산 중 하나이다. 현재까지 OpenGL에서 규정한 정확도를 만족하는 것이 대수적으로 검증된 24-비트 부동소수점 제산기는 알려진 바가 없다. 본 논문에서는 24-비트 부동소수점 제산기를 분석하고, OpenGL ES 3.0에서 규정한 $10^{-5}$의 정확도를 만족함을 대수적으로 검증한다.