• Proceedings of the Korea Water Resources Association Conference
• /
• 2005.05b
• /
• pp.1481-1485
• /
• 2005

This study aims at establishing master plan for efficient establishment of comprehensive drought management information system as non-structural drought counterplan which provides drought damage in advance. Domestic and abroad research related to drought were surveyed and analyzed through many literature and internet for systematic drought management information system. Long-term master plan for comprehensive drought management information system is divided into 3 steps. In first step, drought monitoring system including development of hydrological drought assessment index, drought outlook analysis method and GIS web based drought monitering system is established. In second step, water supply plan and guideline through water shortage danger assessment by areal characteristics is established. In third step, comprehensive management information system through export system linked to KORSIM and establishment of information shared system between each bureau related to drought. Based on this study, master plan for efficient development and application of drought management information system is proposed, it is expected to be applied as guideline for second and third step of drought management information system.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2009.10a
• /
• pp.153-157
• /
• 2009

A Highly efficient Mercury-free Flat Fluorescent Lamp (MFFL) with dielectric barrier Xe gas discharge was developed for an alternative of conventional line-type Cold Cathode Fluorescent Lamps (CCFLs) which shows a wide voltage margin and a stable discharge operation for diffuse glow discharge with an application of a auxiliary electrode. Electro-optic characteristics of the MFFL were examined through the changes in ambient temperature, total pressure and Xe partial pressure. the single cell is expanded into a multi-structured configuration to realize a large sized lamp by a simple repetition of the single cells, and a new driving scheme is proposed for an adaptive brightness control using dual auxiliary electrodes and bi-polar drive scheme. In addition, interesting application of this ultra high luminance flat lamp by the optimization of the gas condition and the pattern of the rear phosphor layer is suggested as a good alternative of daylight lamp source

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.30 no.4
• /
• pp.363-368
• /
• 2012

The result of the line simplification algorithm varies with the choice of algorithms, the change in tolerance and the selection of target objects. Three of the algorithms used in this study are Sleeve-fitting, Visvalingam-Whyatt, and Bend-simplify. They were applied to the three kinds of objects which were buildings, rivers, and roads with the five degrees of the tolerance. Through this experiments the vector displacement, the areal displacement, and the angular displacement were measured and the qualitative analysis was performed with the trend line of the errors. The experimental results show that errors were differ from tolerance values, and characteristics of line simplification algorithms based on changes of tolerance were understood.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.24 no.1
• /
• pp.25-32
• /
• 2016

This study deals with the light environments and weather conditions affecting to the night illuminance over the Korean peninsula. The experiment was executed to analyze the effects on the illuminance at separate sites(Gyeryong and Pilseung) considering the different light environments. The analysis was applied to illuminance measurement from the lightmeter, which was developed for the IYA(International Year of Astronomy) 2009, in order to observe the illuminance of areal networks. The weather observations, such as the cloud cover and visibility, were used to understand the quantitative influence of the illuminance to the selected sites. The results show that the illuminance measurements are significantly different from data of the operational illuminance prediction model which simply applies extinction effect for the illuminance. It shows that these differences are caused by the light environments and weather conditions for each site. Therefore, it can be confirmed that the night illuminance is the output of interaction with the characteristics of light for luminous sources.

• Proceedings of the Korean Society of Agricultural Engineers Conference
• /
• 2001.10a
• /
• pp.93-98
• /
• 2001

This study was performed to analyse the rainfall and the rainfall-runoff characteristics of a rural watershed. The Sangwha basin($105.9km^{2}$) in the Geum river system was selected for this study. The arithmetic mean method, the Thiessen's weighing method, and the isohyetal method were used to analyse areal rainfall distribution and the Huff's quartile method was used to analyse temporal rainfall distribution. In addition, daily runoff analyses were peformed using the DAWAST and tank model. In the model calibration, the data from June through November, 1999 were used. In the model calibration, the observed runoff depth was 513.7mm and runoff rate was 45.2%, and the DAWAST model simulated runoff depth was 608.6mm and runoff rate was 53.5%, and the tank model runoff depth was 596.5mm and runoff rate was 52.5%, respectively. In the model test, the data from June through November, 2000 were used. In the model test, the observed runoff depth was 1032.3mm and runoff rate was 72.5%, and the DAWAST model simulated runoff depth was 871.6mm and runoff rate was 61.3%, and the tank model runoff depth was 825.4mm and runoff rate was 58%, respectively. The DAWAST and tank model's $R^{2}$ and RMSE were 0.85, 3.61mm, and 0.85, 2.77mm in 1999, and 0.83, 5.73mm, and 0.87, 5.39mm in 2000, respectively. Both models predicted low flow runoff better than flood runoff.

• Journal of Korean Society of Rural Planning
• /
• v.5 no.1 s.9
• /
• pp.26-34
• /
• 1999

This study, a sub-one of comprehensive research works titled under "Rural Resources Evaluation System", tried to verify utility/applicability of the developed model system through the case study works on 3 sample villages, Backya, Uyan and Suyu, representing the lowland, upland and seashore villages respectively. From the various surveying and collecting works including the official/statistical data collection, map analysis, in-situ investigation, field survey and written material review, the original data set were obtained and manipulated into final input data for resources grading. After then, by the automatized calculation procedure of "Rural Resources Evaluation System", score results for resources evaluation were finally produced with the total maximum score being 1,000. Through comparing works among score results of 3 case villages and between score results and areal characteristics of each case village, the applicability of the system developed in this study was well confirmed.

• Proceeding of Spring/Autumn Annual Conference of KHA
• /
• 2008.11a
• /
• pp.363-368
• /
• 2008

The purpose of the study is to elicite a dwelling standard for the low-income group as belong to future socially underprivileged class through an investigation of the average size of each zone in plane figures of the apartment. The investigation has been executed to 2 kinds of plane pictures of the most spread exclusive using area scale: $85m^2$ and $65m^2$, which would be a groundwork of data to harmonize with the future dwelling needs, especially those of low-income group. 312 cases were selected to be investigated about each floor space of the living room, the main room, room1, room2, and the kitchen based on wall distance, to be calculated and charted about the average and the proportion of width and depth of each zone. The investigation about how those elements effect to the overall width and depth of the apartment according to the composition and the floor space shape executed as well.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2003.07a
• /
• pp.863-866
• /
• 2003

Multi-walled carbon nanotubes (CNTs) were synthesized on glass substrates in the different ramp-up heating ambient of vacuum, He, Ar, and $N_{2}$ by thermal chemical vapor deposition. CNTs with higher crystallinity were developed in the buffer gases with faster growth rates than in vacuum. Field emission characteristics were strongly related to the relative position of CNT emitters to the cathode electrodes. The areal-spread emission and instability were overcome by locating the emitters far away from the edges of cathode electrodes. The electrical conditioning of emitters improved their emission uniformity over a large area although it decreased the emission current. This study also discussed the long-term stability of CNT emitters.

• Journal of the Korean Society for Precision Engineering
• /
• v.21 no.10
• /
• pp.34-41
• /
• 2004

A new method to fabricate the fine magnetic abrasives by using mechanical alloying is proposed. The mechanical alloying process is a solid powder process where the powder particles are subjected to high energetic impact by the balls in a vial. As the powder particles in the vial are continuously impacted by the balls, cold welding between particles and fracturing of the particles take place repeatedly during the ball milling process using a planetary mill. After the manufacturing process, fine magnetic abrasives which the guest abrasive particles c lung to the base metal matrix without bonding material can be obtained. The shape of the newly fabricated fine magnetic abrasives was investigated using SEM and its polishing performance was verified by experiment. It is very helpful to finishing the injection mold steel in final polishing stage. The areal ms surface roughness of the workpiece after several polishing processes has decreased to a few nanometer scales.

• Economic and Environmental Geology
• /
• v.29 no.5
• /
• pp.615-622
• /
• 1996

Slope stability analysis was conducted using remote sensing and Geoscientific Information System (GIS) as a part of natural hazard assessment around Chungju area. Landsat TM band 5 and 7 which contain more information about geological structure and geography are chosen and processed to analyse regional geological structure. Through image processing technique such as PCA, HFF, edge detection and enhancement, regional lineament can be mapped and identified. The lineament density map is constructed based on summed length of lineaments per unit area and the study area can be divided into 7 structural domains. Various factors of slope stability analysis such as geology, slope aspect, degree of slope, landcover, water shed as well as characterized structural domain are constructed as a database of GIS. Rating and weighting of each factor for slope stability analysis is decided by considering environmental geological characteristics of study area. Spatial analysis of regional slope stability is examined through overlaying technique of the GIS. The result of areal distribution of slope stability shows that the most unstable area is all over Jaeogae-ni, Hyangsan-ni and Mt. Daedun.