• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2009년도 춘계학술대회 논문집
• /
• pp.84-87
• /
• 2009

This paper describes a novel method for fabricating large area metallic stamp with high aspect ratio micro intaglio features. Micro machined brass master with pillar and larger width groove patterns were electroformed to form inverse structures on the large area metallic stamp. This enabled large area metallic stamp with fine micro high aspect ratio micro intaglio features which were small width groove patterns and quadrilateral hole patterns that cannot be fabricated by direct micro machining process. Fabricated large area metallic stamp with high aspect ratio micro intaglio features was measured and analyzed.

• 한국정보처리학회:학술대회논문집
• /
• 한국정보처리학회 2022년도 추계학술발표대회
• /
• pp.648-649
• /
• 2022

Glass is a common object in living environments, but even humans are sometimes unable to identify it. This study proposes a method for detecting glass area by learning edge information from images. The network structure of Transformer is used to accept the base features extracted by backbone and extract the boundary information of RGB images, and both features are used to learn the features of glass area and determine the glass area based on these boundary features. The experimental results show that our proposed method can detect glass area in images.

• 한국실내디자인학회논문집
• /
• 제15권5호
• /
• pp.209-220
• /
• 2006

The goal to establish one multipurpose senior center in one district of Seoul city has been nearly completed. However, since it is behind the schedule by about 6 years, nearly all senior centers are saturated currently. Therefore, additional foundation plan of senior centers is in progress. Also, the main function of the center has changed from health and leisure to various welfare programs that the elderly living in a community need. In order to supplement these problems, many existing senior centers are using center to the most through addition and change of rooms. To establish the direction of spatial plan at establishing senior centers according to the regional characteristics, 20 cases of Seoul multipurpose senior centers in operation were site surveyed and the results of spatial features by types established and changed corresponding to each condition were suggested as follows: 1. The types were classified according to the shape of floor plan, sectional planning, entry traffic line, linkage with attached facilities and addition method etc. by the characteristics of the elderly in multipurpose senior centers, program operation, linkage of spatial composition by the function, positional relation between centers, management and operation method, and center complication method etc. and the respective features were suggested. 2. By analyzing the gross floor area and the area of each room of senior centers, the features of area by types and the features of area by each detailed center were suggested.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 1999년도 하계종합학술대회 논문집
• /
• pp.520-523
• /
• 1999

Specially, form-based documents are easily understood, quickly processed and thus used more than the general documents. In this paper, a method to classify the documents with minimum features is proposed, not like former methods which use all possible features. To apply this characteristics. a document was first partitioned to areas of certain shape and size, then features were extracted from the partitioned area. It is also possible to sort the partitioned area by using the fact that each partitioned area has the different significance in the point of feature. In conclusion, by using proposed method of extracting features from partitioned document, the processing time decreases due to search area reduction.

• 치과방사선
• /
• 제27권1호
• /
• pp.17-24
• /
• 1997

The purpose of the present study was to use digital profile image features and digital image analysis of fixed-dimension bone regions, extracted from standardized periapical radiographs of the maxilla, to determine whether differences exist in alveolar bone of younger women(mean age: 59.23±7.34 years) and just menopaused women(mean age: 59.23±7.34). Periapical films were used from two groups of 20 randomly selected women. None of the subjects had a remarkable medical history. To simplify protocol, we chose one interproximal bone area between the maxillary right canine and lateral incisor for study. Ech film was digitized into a 1312 x 1024 pixel x 8 bit depth matrix by means of a Nikon 35 mm film scanner(LS-35lOAF, Japan) with fixed gain and internal dark current correction to maintain constant illumination. The scanner was interfaced to a Macintosh LC III computer(Apple Computer, Charlotte, N.C.). Area and profile orientation were selected with a NIMH Image 1.37(NIH Research Services Branch, Bethesda, Md.). Histogram features were extracted from each profile and area. The results of this study indicate that mean pixel intensities didn't differ significantly between two groups and there was a high correlarion-coefficient between digitized radiographic profile features and area features.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2006년도 Proceedings of ISRS 2006 PORSEC Volume I
• /
• pp.500-503
• /
• 2006

To adjust the discrepancy between Light Detection and Ranging (LIDAR) strips, previous researches generally have been conducted using conjugate features, which are called feature-based approaches. However, irrespective of the type of features used, the adjustment process relies upon the existence of suitable conjugate features within the overlapping area and the ability of employed methods to detect and extract the features. These limitations make the process complex and sometimes limit the applicability of developed methodologies because of a lack of suitable features in overlapping areas. To address these drawbacks, this paper presents a methodology using area-based algorithms. This approach is based on the scheme that discrepancies make complex the local height variations of LIDAR data whithin overlapping area. This scheme can be helpful to determine an appropriate transformation for adjustment in the way that minimizes the geographical complexity. During the process, the contour tree (CT) was used to represent the geological characteristics of LIDAR points in overlapping area and the Iterative Closest Points (ICP) algorithm was applied to automatically determine parameters of transformation. After transformation, discrepancies were measured again and the results were evaluated statistically. This research provides a robust methodology without restrictions involved in methods that employ conjugate features. Our method also makes the overall adjustment process generally applicable and automated.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2003년도 봄 학술발표회 논문집
• /
• pp.281-288
• /
• 2003

In karst formation area, the tunnel support system is an important factor for the tunnel safety during operation. This paper presents the simplified tunnel support systems to be adopt in karst formation. For the tunnel planned in the project area, karst features and the expected scenarios in the tunnel area were developed based on the results of the geological and geotechnical assessment. In order to provide specific supporting system and construction details for a wide range of possible karst features, the generalized typical support systems are developed according to the classification of karst features. In addition, the initial support systems and construction sequence for each karst feature are also presented in this paper.

• 한국GIS학회:학술대회논문집
• /
• 한국GIS학회 2008년도 공동추계학술대회
• /
• pp.245-246
• /
• 2008

The goal of this study is to explore the possibility of KLT tracker for tracking the features between two images including rotation and shift. As a test site, Jangsu-Gun area of South Korea is selected and the images taken from UAV camera are used for analysis. The analysis was carried out using KLT tracker developed in a PC environment. The results of the experiment used two images with the large overlapping area are compared with the results of two images with the little overlapping area and rotation. Overall, the research indicates that the integrated features of littlerotation and motion images can significantly increase during the tracking process. But using KLT tracker for extracting and tracking features between images with large rotation and motion, the number of tracked features are decreased.

• 대한공간정보학회지
• /
• 제17권1호
• /
• pp.141-147
• /
• 2009

상점의 정보, 서비스업 등을 영위하기 위한 공간입지에 대한 정보(인구생태학적 변수, 사회생태학적 변수)의 탐색적 자료 분석을 위해 공간 특성분석이 필요하다. 따라서 본 연구에서는 지리적 공간상에서 공간객체간의 상호의존성과 상호작용과 통계적 상관분석을 이용하여 서비스업종간의 상관분석법을 제시하고자 하며, 또한 근린상권의 업종 간 상관관계분석의 도출을 통하여 공간특성에 대한 분석을 하기 위함이다.

• 한국지구물리탐사학회:학술대회논문집
• /
• 한국지구물리탐사학회 2004년도 정기총회 및 제6최 특별 심포지움
• /
• pp.157-179
• /
• 2004

The application of magnetic method for archaeoprospection has been carried out through two archaeological areas in Egypt, Abydos and Abu Sir, In order to find out tile ancient Egyptian archaeological features. The magnetic work at the selected archaeological site of Abydos area was carried out by gradiometer survey, while magnetic work at the selected archaeological site of Abu Sir area was carried out by gradiometer survey and magnetic susceptibility measurements. A gradiometer survey with raster of 0.5 m/0.5 m has been carried out on a surface area of $9600 m^2$ at Abydos area to relocate the buried Solar Boats. The magnetic data were processed using Geoplot software to treat the field noises and enhance the quality of the obtained images. The final magnetic images indicate the existence of 12 Solar Boats as well as tombs, remains of ancient rooms and walls. All of them are expected to belong to the Middle Kingdom, particularly from the 18th to 20th Dynasties. Two magnetic tools have been applied over a selected site of $25600 m^2$ at Abu Sir area in order to detect the hidden archaeological features nearby the Sun Temple. The acquisition of the magnetic data was initiated by the measurements of the topsoil magnetic susceptibility of 272 samples collected from the whole studied area, and then followed by the gradiometer survey to measure tile vertical gradient of the geomagnetic field over an area of $14400 m^2$. The magnetic susceptibility results show the presence of high concentration at the middle part of the study area with a little extension to the south western side, with maximum value of about $36{\times}10^5$ SI. They may indicate the proximity of ritual monuments. Also, they offered the site of interest for carrying out a gradiometer survey. The gradiometer results show tile existence of numerous distributed archaeological features made of mud-bricks with different shapes and sizes. They may indicate tombs, burial rooms, dissected walls; all of them are expected to belong to the 5th Dynasty of pharaohs, who used to build their buildings by mud bricks. The depth of the expected buried archaeological features has been estimated from tihe gradiometer. It is around 1.2m for deep features and 0.42 m for shallow features.