• Magazine of the Korean Society of Agricultural Engineers
• /
• 제17권3호
• /
• pp.3848-3859
• /
• 1975

The author attempted to find most suitable formulas for probable rainfall intensities with analysis and consideration for characteristics of rainfall intensities according to the short and long period return periods at Cheong-Joo district. Above mentioned formulas induced by this study can be contributed to the credibility of runoff estimation for urban sewerage system, drainage works in small catchment area and embankment works in the rivers. The results of this study are summarized as follows: 1 Calculation values by Gumbel-Chow method were selected as a mean values for the calculation of probable rainfall intensities according to return periods in the short period. 2. Calculations for probable rainfall intensities for long period are based upon to the result by Iwai's method. Talbot type, {{{{I= {a} over {t+b} }}}} is confirmed as a most suitable formula for probable rainfall intensities among calculation methods in the short periods at Cheong-Joo district. 4. Specific coefficient method, I24=RN24${\beta}$N was selected as a means of calculation for suitable formulas of probable rainfall intensities according to return periods in case of long period. 5. Runoff estimation with high credibility by rational formula can be anticipated by establishment for the most suitable probable rainfall intensities at Cheong-Joo district.

• KIPS Transactions on Software and Data Engineering
• /
• 제5권8호
• /
• pp.385-392
• /
• 2016

Market analysis for a business plain is required for the success in the modern world. Most important part in this analysis is pedestrian traffic counting. A traditional way for this is counting it in person. However, it causes high labor costs and mistakes. This paper proposes an automatic algorithm to measure the pedestrian traffic count using images with webcam. The proposed algorithm is composed of two parts: pedestrian area detection and movement tracking. In pedestrian area detection, moving blobs are extracted and pedestrian areas are detected using HoG features and Adaboost algorithm. In movement tracking, multi-level matching and false positive removal are applied to track pedestrian areas and count the pedestrian traffic. Multi-level matching is composed of 3 steps: (1) the similarity calculation between HoG area, (2) the similarity calculation of the estimated position with Kalman filtering, and (3) the similarity calculation of moving blobs in the pedestrian area detection. False positive removal is to remove invalid pedestrian area. To analyze the performance of the proposed algorithm, a comparison is performed with the previous human area detection and tracking algorithm. The proposed algorithm achieves 83.6% accuracy in the pedestrian traffic counting, which is better than the previous algorithm over 11%.

• The Journal of Korean Society for Radiation Therapy
• /
• 제24권2호
• /
• pp.137-147
• /
• 2012

Purpose: Analyze the Effectiveness of Radiation Treatment Planning by dose calculation and optimization algorithm, apply consideration of actual treatment planning, and then suggest the best way to treatment planning protocol. Materials and Methods: The treatment planning system use Eclipse 10.0. (Varian, USA). PBC (Pencil Beam Convolution) and AAA (Anisotropic Analytical Algorithm) Apply to Dose calculation, DVO (Dose Volume Optimizer 10.0.28) used for optimized algorithm of Intensity Modulated Radiation Therapy (IMRT), PRO II (Progressive Resolution Optimizer V 8.9.17) and PRO III (Progressive Resolution Optimizer V 10.0.28) used for optimized algorithm of VAMT. A phantom for experiment virtually created at treatment planning system, $30{\times}30{\times}30$ cm sized, homogeneous density (HU: 0) and heterogeneous density that inserted air assumed material (HU: -1,000). Apply to clinical treatment planning on the basis of general treatment planning feature analyzed with Phantom planning. Results: In homogeneous density phantom, PBC and AAA show 65.2% PDD (6 MV, 10 cm) both, In heterogeneous density phantom, also show similar PDD value before meet with low density material, but they show different dose curve in air territory, PDD 10 cm showed 75%, 73% each after penetrate phantom. 3D treatment plan in same MU, AAA treatment planning shows low dose at Lung included area. 2D POP treatment plan with 15 MV of cervical vertebral region include trachea and lung area, Conformity Index (ICRU 62) is 0.95 in PBC calculation and 0.93 in AAA. DVO DVH and Dose calculation DVH are showed equal value in IMRT treatment plan. But AAA calculation shows lack of dose compared with DVO result which is satisfactory condition. Optimizing VMAT treatment plans using PRO II obtained results were satisfactory, but lower density area showed lack of dose in dose calculations. PRO III, but optimizing the dose calculation results were similar with optimized the same conditions once more. Conclusion: In this study, do not judge the rightness of the dose calculation algorithm. However, analyzing the characteristics of the dose distribution represented by each algorithm, especially, a method for the optimal treatment plan can be presented when make a treatment plan. by considering optimized algorithm factors of the IMRT or VMAT that needs to optimization make a treatment plan.

• Journal of the Korean Society for Advanced Composite Structures
• /
• 제6권2호
• /
• pp.17-22
• /
• 2015

In this paper, we study the calculation for the fracture area of the composite material specimens using digital image processing techniques. This study was able to calculate the area of the fracture region through the main operation step 7 on the basis of improved image. To extract the area in the original image, we have to use opening operation, close operation, the Hit-or-Miss operation and Bottom hat filter, Top hat filter, etc. In particular, to extract the area of the composite specimen discussed in this study, we have to use the combination of the operations and filters because it is non-isotropic material, or should develop a new algorithm based on it.

• Journal of the Korean Institute of Educational Facilities
• /
• 제23권5호
• /
• pp.3-10
• /
• 2016

The purpose of this study is to provide a basis for planning of school foodservice facilities to operate with hygiene and efficiency corresponding a decrease of the number of students. This study analyzes the composition of space for foodservice facilities categorizing by the functions which are preparation area, cooking area, cleaning area, storage, and worker's room on elementary, middle and high school in Seoul Metropolitan city since 2009 that the Seoul School Health Promotion Center published a manual for school foodservice facilities. The calculation can be a basis for school planners and the general schools to use available area in each school and can manage the school usage plan appropriately. The number of students in each school has been regarded as the space planning element, but the number of students would considered with using the specific area and time.

• Journal of the Korean Geotechnical Society
• /
• 제19권4호
• /
• pp.299-310
• /
• 2003

In the evaluation of the subgrade stiffness structure by the SASW method, the calculation of the phase velocities is the important task controlling the reliability of the result. The interpretation of the phase spectrum should precede the phase-velocity calculation in the current practice of the SASW method. The difficulty involved in the interpretation prohibited the SASW method from being spread over to the industry. This study proposed a new method called the frequency-wave number technique, which is based on the frequency-wave number relationship of the surface wave in the multi-layered system. The frequency-wave number technique eliminates the expertise in the interpretation of the phase spectrum, automates the phase-velocity calculation and expedites the determination of the phase-velocity dispersion curve. To verify the validity of the proposed frequency-wave number method, the transfer function determined from the numerical simulation of the SASW measurements was used fir the calculation of the automatic calculation of the phase velocities and compared with the phase velocities by WinSASW employing the phase-unwrapping method. Also, the proposed method was applied to the real SASW measurements performed at$\bigcirc$$\bigcirc$area in GyeongGi-Do to see how the proposed method works with the real measurements.

• The Research Journal of the Costume Culture
• /
• 제7권2호
• /
• pp.275-288
• /
• 1999

The purpose of this is providing a simple, relatively errorless body surface area calculation. Subjects were 10 married women and 10 singles women whose age was 20 to 29 years old. The Gypsum method has applied for the sampling of body surface. The Weight method has been used to measure body surface by means of transferring gypsum shape on uniform plane polypropylene films. In this study, compare analyzed errors between the traditional formulas for measuring body surface area and measuring data in this experiment. More than all, it has been to induce a regression equation for measuring body surface area, which is so simple to calculate with less errors, with variable factors as weight and height. The results of this experiment as follows : 1. In the traditional formulas, weight formula was shown high average error : Niya\`s height formula. which was modified K value as 0.62 in the height formula (S = KH) is shown lower average error than Lassabliere\`s Height formula. 2. In the weight-height formula (S=K √WH), it was shown high average error according to the increasing of K value. Kawanami\`s formula, which 5.378 as K value, was shown low average error both the singles and the married women. 3. Dubois weight-heingt formula (S=W/sup a/·H/sub b/·K) was shown low average error than the weight, height, weight-height (S=K√WH) formula. 4. The regression equations with variable factors as weight and height are 156.74W + 86.05H - 660.25 (Single women) and 136.02W + 90.57H - 6241.32 (Married women) the average error and absolute average error to the singles are 0.09%, 0.94% and resoectively -0.13%, 1.16% for the married women.

• Journal of Korean Society of Rural Planning
• /
• 제16권4호
• /
• pp.53-60
• /
• 2010

This study aims at suggesting the attributes and limitations of each methods through the evaluation of the verified analysis results, so that it will be possible to select an efficient method that may be applied to assess the green coverage ratio. Green coverage areas of each sites subject to this study were assessed utilizing the following four methods. First, assessment of green coverage area through direct planimetry of satellite images. Second, assessment of green coverage area using land cover map. Third, assessment of green coverage area utilizing the band value in satellite images. Forth, assessment of green coverage area using and land cover map and reference materials. For this study, four urban zones of the City of Seosan in Chungcheongnam-do. As a result, this study show that the best calculation method is the one that combines the merits of first and second methods. This method is expected to be suitable for application in research sites of middle size and above. It is also deemed that it will be possible to apply this method in researches of wide area, such as setting up master plans for parks and green zones established by each local self-government organizations.

• Proceedings of the IEEK Conference
• /
• 대한전자공학회 2000년도 추계종합학술대회 논문집(4)
• /
• pp.255-258
• /
• 2000

This thesis shows controlling the mobile robot with distance information gotten with ultrasonic sensors, and analysis of captured image. The ultrasonic sensors supplies more accurate distance data in limited area but shows unstable data unlimited area while image data generally shows stable data, but this requires so much time because of amounts of calculation. So this thesis considers the merits of ultrasonic sensors and image to implement robot system .

• Proceedings of the Korean Society of Agricultural Engineers Conference
• /
• 한국농공학회 2002년도 학술발표회 발표논문집
• /
• pp.397-400
• /
• 2002

Discharge characteristics of pollutant loadings from sewage systems were estimated in the catchment area of a reclaimed area - Saemangeum -. Pollutant loadings were estismated according to the discharge pattern of small treatment facilities. BOD pollutant loadings produced by population were 84,380kg/day, which were composed of nightsoil 35% and sewage 65%.