• 한국지진공학회논문집
• /
• 제23권2호
• /
• pp.131-140
• /
• 2019

Diagonally reinforced concrete coupling beams (DRCBs) have been widely adopted in reinforced concrete (RC) bearing wall systems. DRCBs are known to act as a fuse element dissipating most of seismic energies imparted to the bearing wall systems during earthquakes. Despite such importance of DRCBs, the damage estimation of such components and the corresponding consequences within the knowledge of performance based seismic design framework is not well understood. In this paper, drift-based fragility functions are developed for in-plane loaded DRCBs. Fragility functions are developed to predict the damage and to decide the repair method required for DRCBs subjected to earthquake loading. Thirty-seven experimental results are collected from seventeen published literatures for this effort. Drift-based fragility functions are developed for four damage states of DRCBs subjected to cyclic and monotonic loading associated with minor cracking, severe cracking, onset of strength loss, and significant strength loss. Damage states are defined in a consistent manner. Cumulative distribution functions are fit to the empirical data and evaluated using standard statistical methods.

• 한국지진공학회논문집
• /
• 제19권6호
• /
• pp.273-282
• /
• 2015

In this study, shaking table test has been carried out for the dual frame passive control system for seismic performance verification of the proposed system. The proposed system was separated into two independent frameworks that are strength resistant core and frame structure by connecting to the damper. Moreover, the seismic performance improvement of the proposed system has been verified by comparing and analyzing the experimental results of the proposed system with an existing core system. As a result of the shaking table test, acceleration and displacement responses of dual-frame vibration control system are decreased than those of the existing strength resistant type core system. In the case of the core system, while the damage was concentrated on the column of first floor, the damage of the dual system was dispersed in each layer. The damage also was concentrated on the damper, almost no damage occurs to the structural members. It has been emphasized that installed dampers in the proposed dual system reduce the input energy of whole structure by absorbing seismic input energy, which leads overall system damage to be reduced.

• 한국지진공학회논문집
• /
• 제20권6호
• /
• pp.391-400
• /
• 2016

For earthquake loss estimation of building structures in Gangnam-Gu district in Seoul, three scenario earthquakes were selected by comparison of the response spectra of these scenario earthquakes with the design spectrum in Korean Building Code (KBC 2009), and then direct losses of the building structures in the Gangnam-Gu district under each scenario earthquake are estimated. The following conclusions are drawn from the results of damage and loss in the second scenario earthquake, which has a magnitude = 6.5 and epicentral distance =15 km: (1) The ratio of building stocks undergoing the extensive and complete damage level is 40.0% of the total. (2) The amount of direct economic losses appears approximately 19 trillion won, which is 1.2% of the national GDP of Korea. (3) About 25% of high-rise (over 10-story) RC building wall structures, were inflicted with the damage exceeding moderate level, when compared to 60% of low-rise building structures. (4) From the economical view point, the main loss, approximately 50%, was caused by the damage in the high-rise RC wall building structures.

• 국제초고층학회논문집
• /
• 제6권3호
• /
• pp.207-216
• /
• 2017

Installing accelerometers in a building is an effective way to know how the building shakes when an earthquake happens. In this paper, we will introduce an example of an analysis that captures the acceleration reduction effect of the vibration damping device using data observed by the accelerometer at Roppongi Hills Mori Tower in Minato-ku, Tokyo, during the Great East Japan Earthquake on March 11, 2011. Moreover, as the latest effort, from the standpoint of a developer who builds and operates a number of high-rise buildings in Japan, where frequent earthquakes are experienced, a system for real-time processing of accelerometer data was developed to instantly diagnose the degree of damage to high-rise buildings, and the actual system of earthquake damage health monitoring is discussed. This system is currently in operation in twelve high-rise buildings including Roppongi Hills Mori Tower.

• Smart Structures and Systems
• /
• 제9권1호
• /
• pp.55-70
• /
• 2012

It is not easy to experimentally obtain the FRF (Frequency Response Function) matrix corresponding to a full set of DOFs (degrees of freedom) for a dynamic system. Utilizing FRF data measured at specific positions, with DOFs less than that of the system, as constraints to describe a damaged system, this study identifies parameter matrices such as mass, stiffness and damping matrices of the system, and provides a damage identification method from their variations. The proposed parameter identification method is compared to Lee and Kim's method and Fritzen's method. The validity of the proposed damage identification method is illustrated in a simple dynamic system.

• 대한건축학회논문집:계획계
• /
• 제34권8호
• /
• pp.129-136
• /
• 2018

Termites are important sub-baits of natural ecosystems and are beneficial insects that are natural decomposer. However, the building materials used by human beings can not coexist with each other on timber which is a termite food. As of 2017, due to fertile forests, warming, and the spread of boilers, termite damage to timber construction is increasingly occurring day by day. Currently, Korea utilizes fumigation, Beit system, preserved wood, etc. of chemical products as termite control measures. But in the case of control measures, timber that has already been eaten by termites can not serve as a structural material and must be repaired. On the other hand, in the case of overseas, Scale of damage to termites the influence on the construction is also large, and a lot of research has been carried out on the prevention methods. In this thesis, investigate such foreign control measures, Would like to suggest a suitable method for Korea.

• 한국건축시공학회지
• /
• 제16권5호
• /
• pp.437-445
• /
• 2016

태풍은 인류에 큰 피해를 주는 재난재해로 몇몇 선진국에서는 태풍으로 인한 건축물 피해액 사전예측 모델에 관한 연구가 진행되고 있다. 국내에서도 해외 연구를 토대로 국내에 적용시키는 연구가 진행되었지만, 태풍의 특성이나 크기 등이 차이가 나므로 국내에 적합한 모델이 필요한 실정이다. 또한, 국내의 연구는 태풍의 특성, 지역적 특성만을 고려하여 진행 하였으나, 태풍은 복합재해로서 태풍의 특성, 지리적 특성만이 아닌 태풍의 진로, 건설환경, 등 다양한 요인을 고려하여야한다. 이에 본 연구에서는 국내에 영향을 미친 태풍을 7가지 타입으로 분류하여 건물피해액 영향인자를 도출하고, 회귀분석을 실시하여 태풍 타입별 건물피해율 예측모델을 개발 목적으로 한다. 이는 선진국의 자연재해 예측모델들과 같이 국내의 상황에 맞는 태풍에 따른 피해를 예측하기 위한 모델 개발을 위한 자료로 활용 될 것이다.

• 한국농촌건축학회논문집
• /
• 제13권1호
• /
• pp.37-44
• /
• 2011

The maintenance works for brick-structured buildings are a new field in Korea, and practical cases are yet inadequate so that such works may cause adverse effects of damaging the buildings after all. Therefore, this study has extracted a preservation technology believed to be most desirable in minimizing the damage to the original state of the buildings and preserving the value as the cultural assets through maintenance work details from 1986 to 2010 regarding brick-structured buildings designated as cultural properties. Firstly, a brick replacement method of using the brick used at the time of construction is efficient in replacement and repair of brick material for preserving value of cultural assets and minimizing damage of the original form. Secondly, use of lime mortar through material analysis is effective in repair of masonry joint and mortar but it is not used often due to high experimental cost. Finally, reinforcement of structure using a form for a building with severe damage is most efficient when considering additional problems. However, damage on the original form of a building can be minimized and value of a building can be preserved only when consideration on sufficient case analysis, materials to be used, and conditions of a building is supported.

• 한국공간구조학회논문집
• /
• 제17권1호
• /
• pp.49-58
• /
• 2017

The result of the previous work leads to the idea that the inner area of the hyperbolic shell generator should be minimized for the cooling tower with higher first natural frequency. In this study the inner area of the hyperbolic shell generator was graphically established under varying height of the throat and angle of the base lintel. From the graph, several shell geometries were selected and analysed in the aspect of the natural frequency. Three representative towers reinforced differently due to different first natural frequencies were analysed non-linearly and evaluated using a damage indicator based on the change of natural frequencies. The results demonstrated that the damage behaviour of the tower reinforced higher due to a lower first natural frequency was not necessarily advantageous than the others.

• 한국전산구조공학회논문집
• /
• 제32권1호
• /
• pp.45-54
• /
• 2019

본 논문에서는 EKF기법의 초기 파라미터 설정에 따른 상태벡터의 발산 문제를 해결하고자 AEKF기법을 제시한다. EKF기법의 초기 파라미터는 상태벡터 수렴 및 안정성에 중요한 역할을 함으로 초기 파라미터의 적절한 설정은 EKF를 사용함에 있어 매우 중요하다. AEKF방법은 초기 파라미터인 P행렬을 k스텝마다 업데이트하여 초기 상태벡터의 변화에 민감하게 반응할 수 있으며, 또한 초기 상태벡터와 실제 시스템 모델과의 차이가 크게 발생하여도 적응적으로 P행렬의 값을 조절하여 상태벡터의 수렴을 가능하게 한다. 또한 Q행렬 및 R행렬을 k스텝 업데이트하여 상태벡터의 수렴 안정성을 더욱 확보하였다. 3DOF시스템을 통해서 AEKF기법의 결과와 EKF, UKF기법을 비교 검증하였다.