• Journal of Surface Science and Engineering
• /
• v.50 no.1
• /
• pp.17-23
• /
• 2017

This work demonstrates arc generation and anodic film formation behaviors on Al1050 alloy during PEO (plasma electrolytic oxidation) treatment under a constant direct current in an alkaline electrolyte containing silicate, carbonate and borate ions. Only one big arc more than 2 mm diameter was generated first at the edges and it was moving on the fresh surface or staying occasionally at the edges, resulting in the local burning due to generation of an extremely big orange colored arc at the edges. Central region of the flat surface was not fully covered with PEO films even after sufficiently long treatment time because of the local burning problem. The anodic oxides formed on the flat surface by arcing once were found to consist of a number of small oxide nodules with spherical shape of $3{\sim}6{\mu}m$ size and irregular shapes of about $5{\sim}10{\mu}m$ width and $10{\sim}20{\mu}m$ length. The anodic oxide nodules showed uniform thickness of about $3{\mu}m$ and rounded edges. These experimental results suggest that one big arc observed on the specimen surface under the application of a constant direct current is composed of a number of small micro-arcs less than $20{\mu}m$ size.

• Journal of the Korean Home Economics Association
• /
• v.25 no.2
• /
• pp.13-23
• /
• 1987

The present study is undertaken to utilize the computer in pattern making of Jeugo-ris for women. The results are as follow: 1. Basic points which can be connected to depict basic pattern are represented with the numerical expreession and the curved lines consist of three types of arc. 2. The patterns of Jeugo-ris were automatically depicted by inputting the standard size(large, medium and small) and body measurements for bodice(bust girth, center back length, sleeve length). 3. This program includes the function of expressing the specific parts of patterns and of extending the patterns with or without standard lines.

• The Transactions of the Korean Institute of Electrical Engineers B
• /
• v.51 no.6
• /
• pp.273-284
• /
• 2002

In this paper, computer simulations of the physical Phenomena occurring in the arc region before and after current zero were carried out to evaluate the dielectric recovery characteristics of two types of double-flow nozzles. A commercial CFD Program "PHOENICS" is used for the simulation and the user-coded subroutines to consider the arcing phenomena were added to this program by the authors. The computed results were verified by the comparison with the test results presented by the research group of BBC. In order to investigate the state of the arc region after current zero, the simulation was carried out with four steps. They are cold gas flow analysis, steady state arc simulation, transient arc simulation before current zero, transient hot gas flow simulation after current zero. The semi-experimental arc radiation model is adapted to consider the radiation energy transport and Prandtl′s mixing length model is employed as the turbulence model. The electric field and the magnetic field were calculated with the same grid structure used for the simulation of the flow field. The streamer criterion was introduced to evaluate the dielectric recovery characteristics after current zero. Compared with the results obtained by assuming the current zero state in the former studies, it has been found that the results obtained by considering the state before current zerowere more accurate.

• Journal of Ocean Engineering and Technology
• /
• v.25 no.6
• /
• pp.1-8
• /
• 2011

This paper describes a new method for a digital gas metal arc welding (GMAW) system. The GMAW system is an arc welding process that incorporates the GMAW power source (PS-GMAW) with a wire feed unit (WFU). The PS-GMAW requires an electric power of constant voltage. A constant magnitude is maintained for the arc current by controlling the wire-feed speed of the WFU. A mathematical model is derived, and a self-tuning fuzzy proportional-integral-derivative (PID) controller is designed and applied to control the welding current. The electrode wire feeding mechanism with this controller is driven by a DC motor, which can compensate for both the molten part of the electrode and undesirable fluctuations in the arc length during the welding process. By accurately maintaining the output welding current and welding voltage at constant values during the welding process, excellent welding results can be obtained. Simulation and experimental results are shown to prove the effectiveness of the proposed controller.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.44 no.1
• /
• pp.12-18
• /
• 2007

As an arc fault interrupter, the AFCI mentioned in this paper has been designed to detect and interrupt arc faults due to wire deterioration, insulation, wire damage, loose connection, and excessive mechanical damage. Since AFCI is digital and uses mechanical and electric stress, the length of interruption against overload and over-current is much shorter than the current bi-metal method. Therefore, the risk of electrical fires has been reduced.

• Nuclear Engineering and Technology
• /
• v.36 no.4
• /
• pp.357-363
• /
• 2004

A prototype long pulse ion source was developed, and the beam extraction experiments of the ion source were carried out at the Neutral Beam Test Stand (NBTS) of the Korea Superconducting Tokamak Advanced Research (KSTAR). The ion source consists of a magnetic bucket plasma generator, with multi-pole cusp fields, and a set of tetrode accelerators with circular apertures. Design requirements for the ion source were a 120kV/65A deuterium beam and a 300 s pulse length. Arc discharges of the plasma generator were controlled by using the emission-limited mode, in turn controlled by the applied heating voltage of the cathode filaments. Stable and efficient arc plasmas with a maximum arc power of 100 kW were produced using the constant power mode operation of an arc power supply. A maximum ion density of $8.3{\times}10^{11}\;cm^{-3}$ was obtained by using electrostatic probes, and an optimum arc efficiency of 0.46 A/kW was estimated. The accelerating and decelerating voltages were applied repeatedly, using the re-triggering mode operation of the high voltage switches during a beam pulse, when beam disruptions occurred. The decelerating voltage was always applied prior to the accelerating voltage, to suppress effectively the back-streaming electrons produced at the time of an initial beam formation, by the pre-programmed fast-switch control system. A maximum beam power of 0.9 MW (i.e. $70\;kV{\times}12.5\;A$) with hydrogen was measured for a pulse duration of 0.8 s. Optimum beam perveance, deduced from the ratio of the gradient grid current to the total beam current, was $0.7\;{\mu}perv$. Stable beams for a long pulse duration of $5{\sim}10\;s$ were tested at low accelerating voltages.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.59 no.1
• /
• pp.21-30
• /
• 2017

Soil erosion has been issued in many countries since it causes negative impacts on ecosystem at the receiving water bodies. Therefore best management practices to resolve the problem in a watershed have been developed and implemented. As a prior process, there is a need to define soil erosion level and to identify the area of concern regarding soil erosion so that the practices are effective as they are designed. Universal Soil Loss Equation (USLE) were developed to estimate potential soil erosion and many Geographic Information System (GIS) models employ USLE to estimate soil erosion. Sediment Assessment Tool for Effective Erosion Control (SATEEC) is one of the models, the model provided several opportunities to consider various watershed peculiarities such as breaking of slope length, monthly variation of rainfall, crop growth at agricultural fields, etc. SATEEC is useful to estimate soil erosion, however the model can be implemented with ArcView software that is no longer used or hard to use currently. Therefore SATEEC based on ArcView was rebuild for the ArcGIS software with all modules provided at the previous version. The rebuilt SATEEC, ArcSATEEC, was programmed in ArcPy and works as ArcGIS Toolset and allows considering monthly variations of rainfall and crop growth at any watershed in South-Korea. ArcSATEEC was applied in Daecheong-dam watershed in this study, monthly soil erosion was estimated with monthly rainfall and crop growth variation. Annual soil erosion was computed by summing monthly soil erosion and was compared to the conventional approach to estimate annual soil erosion. The annual soil erosion estimated by the conventional approach and by summing monthly approach did not display much differences, however, ArcSATEEC was capable to provide monthly variation of soil erosion.

• Communications of the Korean Mathematical Society
• /
• v.12 no.3
• /
• pp.679-683
• /
• 1997

We obtain new upper bound of the area of a constant breath curve. We estimate the area of a constant breadth curve in terms of its breadth and minimal radius and the arc length of its pedal curve.

• Honam Mathematical Journal
• /
• v.32 no.1
• /
• pp.53-60
• /
• 2010

The concept of discrete curvature is a discretization of the curvature. Many literatures introduce discrete curvatures derived from arc length of circular arcs. We propose a new concept of discrete curvature of a polygon at each vertex, which is derived from area of fan shapes. We estimate the error of the discrete curvature and compare the discrete curvature with old one.

• Proceedings of the KWS Conference
• /
• 2007.11a
• /
• pp.82-84
• /
• 2007