• Applied Biological Chemistry
• /
• v.49 no.2
• /
• pp.140-144
• /
• 2006

Sajabalssuk (Artemisia herba) was extracted with 80% aqueous MeOH, and the concentrated extract was partitioned with EtOAc, n-BuOH and $H_2O$, successively. From the EtOAc and n-BuOH fractions, four sterols were isolated through the repeated silica gel and ODS column chromatographies. From the results of physico-chemical data including NMR, MS and IR, the chemical structures of the sterols were determined as ${\beta}-sitosterol$ (1), ergosterol peroxide (2), stigmasterol (3) and daucosterol (4). They were the first to be isolated from Sajabalssuk (Artemisia herba).

• Applied Chemistry for Engineering
• /
• v.8 no.6
• /
• pp.1022-1028
• /
• 1997

This work was performed to study the characteristics of electrochemical intercalation reactions occurring at the interface between the organic electrolyte and tungsten trioxide thin film (thickness of $4000{\AA}$) prepared by e-beam evaporation method as cathodically coloring oxide with regard to the electrochromism by the intercalating reactions of the lithium cation in the 1M $LiClO_4/PC$ organic solution. The characteristics of electrochemical intercalation reactions were investigated by various DC electrochemical methods such as cathodic Tafel polarization test, multiple and the single sweep cyclic voltammetry and the coulomety titrations method. The surfaces of thin films were observed with the patterns of X ray diffraction after the coloring and bleaching reactions. In comparison with the previous results that $WO_3$ thin film intersely detached from the surface of electrode when the hydrogen cation was intercalated into $WO_3$ thin film in the o.1N $H_2SO_4$ aqueous solution, the intercalation reaction of lithium cation into $WO_3$ thin film in the 1M $LiClO_4/PC$ organic solution was shown that the stable bleaching and coloration was appeared within 1.0V of the applied overpotential. When the overpotential of electrochromic reaction for lithium cation in the 1M $LiClO_4/PC$ organic solution had been applied up to 1.5V, the accumulation phenomenon of lithium in amorphous $WO_3$ thin film layer occurred because the inserted lithium into amorphous $WO_3$ thin layer for coloring process was not fully removed from the thin layer to the electrolyte during bleaching process. It was found that there is a limitation of applied overpotential for coloring process by the reduction of the current densities of bleaching and coloration after few number of coloring and bleaching cycles.

• Applied Chemistry for Engineering
• /
• v.8 no.6
• /
• pp.1006-1013
• /
• 1997

This study was carried out to elucidate the chemical characteristics of mutual separation for Am and Eu, which were selected as a stand-in from minor actinide and rare earth elements, by solvent extraction with di-(2-ethylhexyl)phosphoric acid containing zirconium at batch system. As results, 92.3% of Am and 99.1% of Eu were coextracted with 1M DEHPA/n-dodecane containing zirconium (Zr $concentration=8.7g/{\ell}$) at 0.5M $HNO_3$ in the extraction step. The extraction yields of Am and Eu were proportionally increased with the concentration of Zr in Zr salt of 1M DEHPA/n-dodecane having the synergistic effect. In the lst stripping step for the selective separation of Am, 38.1% of Am and 3% of Eu were stripped with the mixed solution of 0.05M DTPA and 1M lactic acid adjusted pH of 3.0. At that time, the separation factor calculated from the distribution coefficients of Am and Eu was 14.2. In the 2nd Stipping step to remove the Eu remained the organic phase after the lst stripping step, 94.4% 0f Eu was stripped into aqueous phase with 6M $HNO_3$.

• Applied Chemistry for Engineering
• /
• v.19 no.5
• /
• pp.554-558
• /
• 2008

$(1-x)SiO_2-(x)TiO_2$ composite fibers with various compositions of $TiO_2$ were prepared by electrospinning their sol-gel precursors of titanium (IV) iso-propoxide (TiP), and tetraethyl orthosilicate (TEOS). The surface morphology and structure of sintered composite fibers were characterized using X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), simultaneous thermogravimetric analysis-differential scanning calorimetry (TGA-DSC) and Fourier transform infrared spectroscopy (FT-IR). As the content of $TiO_2$ in $(1-x)SiO_2-(x)TiO_2$ system was increased the average diameter of composite fibers was proportionally increased. Also, the transformation of $TiO_2$ from anatase to rutile form was inhibited by the highly dispersed $TiO_2$ around $SiO_2$ particles up to $0.6SiO_2-0.4TiO_2$ composite fibers even after calcination at $1000^{\circ}C$. The photocatalytic activity of $SiO_2-TiO_2$ composite fibers was examined for the methylene blue (MB) decomposition which was confirmed using UV-vis/DRS spectra. The experiments demonstrated that the MB in aqueous solution was successfully photodegraded using $SiO_2-TiO_2$ composite nanofibers under UV-visible light irradiation.

• Applied Chemistry for Engineering
• /
• v.18 no.5
• /
• pp.483-489
• /
• 2007

Polyaniline (PANI)/Polyimide (PI) membranes were prepared and the effects of PANI contents and doping on the structural properties and gas separation properties were studied. The polyamic acid (PAA) solution was prepared by the polycondensation reaction of 4,4'-(hexafluoroisopropylidene) diphthalic anhydride (6FDA) and 4,4'-oxydianiline (ODA) in 1-methyl-2-pyrrolydinone (NMP) solvent. The PANI/PI blends were obtained by mixing PAA solution and PANI solution, and were doped with 1 M aqueous HCl solution for 24 h. The structural characterizations of the as-cast and doped membranes were examined by FT-IR, XRD, and TGA. The gas permeation experiments with $H_2$, $CO_2$, $O_2$, $N_2$, and $CH_4$ were carried out by variable pressure method at $30^{\circ}C$ and 5 atm. For all gases tested, the permeability coefficients of the blends decreased with increasing PANI content and the magnitude of permeability was in the order of $H_2$ > $CO_2$ > $O_2$ > $N_2$ > $CH_4$. The permeability for PANI/PI membranes decreased after the doping process while the permselectivity increased. For $H_2/CH_4$ separation, the doped PANI/PI (75/25) membrane has a permselectivity of 991.

• Analytical Science and Technology
• /
• v.11 no.6
• /
• pp.460-468
• /
• 1998

Schiff base ligands such as $SOPDH_2$, $SNDH_2$, $EBNH_2$, and $PBNH_2$ and their Co(II) complexes such as [$Co(II)(SND)(H_2O)_2$], [$Co(II)(SOPD)(H_2O)_2$], [$Co(II)(EBN)(H_2O)$], and [$Co(II)(PBN)(H_2O)$] have been synthesized. The mole ratio of Shiff base ligand to cobalt(II) for the Co(II) complexes was found to be 1:1. Also these complexes have been configurated with hexa-coordination. Reduction of dioxygen was investigated by cyclic voltammetry at glassy carbon electrodes modified with Schiff base Co(II) complexes in 1 M KOH aqueous solution. At modified glassy carbon electrode with Schiff base Co(II) complexes, reduction peak current of oxygen was increased and peak potential was shifted to more positive direction compared to bare glassy carbon electrode. The electrokinetic parameters such as number of electron and exchange rate constant were calculated from the results of cyclic voltammogrms. The reduction of dioxygen at glassy carbon electrode has been $2e^-$ reaction pathway. Exchange rate constant at glassy carbon electrode modified with Co(II) complexes was increased 2~10 times compared to bare electrode.

• Applied Chemistry for Engineering
• /
• v.17 no.1
• /
• pp.106-110
• /
• 2006

If drugs are made from nanoparticles, their formulations can be more effective than the conventional ones. Especially, water insoluble drugs having low absorption rates into our body could show improvement in their adsorption and bioavailability by decreasing their particle sizes to nanometers. In this study, polyvinylpyrrolidone (PVP) and various sugars were employed as stabilizers for the nanoparticles of a water insoluble drug, Itraconazole. Nanoparticles were successfully produced by the wet slurry process for five days. Then, spray drying converted the aqueous dispersions into dry powders, and the redispersibility of dried nanoparticles into water was investigated. The effects of temperature, pressure, and flow rate were studied to understand the importance of processing variables on redispersibility. It was found in particle size analysis that nanoparticles containing sugars have better redispersibility than those without sugars. Additionally, the mainly spherical morphology of dried nanoparticles was identified by SEM (Scanning Electron Microscopy) and AFM (Atomic Force Microscopy).

• Applied Chemistry for Engineering
• /
• v.9 no.4
• /
• pp.542-547
• /
• 1998

Polyamine type polymer flocculants were synthesized and their characterization, viscosity and flocculation studies were conducted. In order to increase the molecular weight of polyamine flocculant which was prepared by polycondensation reaction from dimethylamine and epichlorohydrin, a small amount of 1,6-hexanediamine was employed. The incorporation of 1,6-hexanediamine up to 5.5 mole % replacing corresponding part of dimethylamine gave a branched type polyamine sample with increased intrinsic viscosity ([${\eta}$]=0.46 in 1 wt % aqueous NaCl solution). The amount of 1,6-hexanediamine above 5.5 mole %, however, resulted in gelation during polymerization. Utilizing raw water from Maegok potable water treatment plant, it was found that the addition of polyamine flocculant at a concentration of 1 mg/L level could reduce the amount of polyaluminum chloride (PAC) inorganic flocculant by half (15 mg/L). It was also observed that the incoporation of polyamine flocculant at 1 mg/L level was effective in the higher pH raw water, while PAC inorganic flocculating agent alone was not effective.

• Applied Chemistry for Engineering
• /
• v.7 no.4
• /
• pp.768-776
• /
• 1996

Carbon Black has various advantageous properties such as reinforcement, tinting, weathering, chemical resistance, electrical resistance, etc., but it has poor affinity in the solution. The purpose of this study is to enhance dispersion in the aqueous solution by altering the surface characteristics. Two different treatments were applied for both channel black and furnace black respectively. Channel black was treated in alkaline solution to replace hydrogen of the carboxyl group with alkaline metal, Li, Na, K. Furnace black has few functional groups, and it was treated with $HNO_3$ to increase the number of functional group on carbon black. It was seen that the substitution of alkaline metal on the surface of channel black enhances the degree of dispersion. Also the higher the acid concentration and reaction temperature, the more the number of some functional groups on the furnace black. Reaction time was not seen to be effective.

• Applied Chemistry for Engineering
• /
• v.7 no.4
• /
• pp.707-714
• /
• 1996

Extraction behaviour of Np with DEHPA(di-(2-ethyhexyl)Phosphoric acid) from the low nitric acid solution(below 1M $HNO_3$) containing $H_2O_2$ as a reducing agent was studied at a batch system in order to establish the conditions of extraction and stripping and to enhance the extraction rate. As results, it was confirmed that the Np was mainly the pentavalent oxidation state in the low nitric acid solution. The extraction yield of Np was increased with increasing the concentration of DEHPA and $H_2O_2$ and decreased more rapidly with the increase of $HNO_3$ concentration. It was also found that the Np could be extracted into DEHPA even without the addiction any redox agents, although the extraction yield is rather low as about 70%. The extraction rate was proportional to the 0.516 power of $H_2O_2$ concentration and inversely proportional to 0.483 power of $HNO_3$ concentration as follows. $d[Np(V)]/dt=-1.391{\times}10^{-2}[H_2O_2]^{0.516}[HNO_3]^{-0.483}[Np(V)]$ Regardless of the $H_2O_2$, the Np extracted in the organic phase was effectively stripped to the aqueous phase with $H_2C_2O_4$. The Np could be stripped more than 92 % with 0.5M $H_2C_2O_4$.