• Asian-Australasian Journal of Animal Sciences
• /
• 제2권1호
• /
• pp.1-6
• /
• 1989

Nutritive values and fermentation rates of rice straw treated with 3% anhydrous and 3% aqueous ammonia were evaluated both in vitro and sheep metabolism trials. Daily gain, feed efficiency and feed cost per gain were also determined with growing Holstein bulls fed anhydrous and aqueous ammonia treated rice straw. Crude protein was increased 2.4 fold and NDF was decreased 6.5%, but ADF and cellulose were not different between untreated and ammonia treated rice straw. An average of 35.5% of total added ammonia-N retained in the rice straw and other 64.5% was not retained in the rice straw. Ammonia treatment increased in vitro DM, NDF, ADF and cellulose digestibilities by 44.8%, 43.3%, 49.4% and 42.4%, respectively, and fermentation rates by 63.3%, 132.4%, 49.4% and 42.4%, respectively. In sheep metabolism trials, DM digestibilities of rice straw treated with anhydrous and aqueous ammonia were increased 22% and 36%, respectively, and digestible DM intakes by 48% and 70%, respectively in sheep fed anhydrous and aqueous ammonia treated rice straw over untreated rice straw. Rumen ammonia and blood urea were considerably higher in sheep fed ammonia treated rice straw than sheep fed untreated rice straw. Daily gain of Holstein bulls was increased 20.8% and 29.9% and rice straw intakes were increased 28.4% and 44.3% in anhydrous and aqueous ammonia treated rice straw over untreated rice straw. Feed conversion was improved 9.5% and 10.3% and feed cost/gain was reduced 7.1% and 9.2% respectively in anhydrous and aqueous ammonia treated rice straw group as compared with untreated rice straw group.

• 신재생에너지
• /
• 제6권4호
• /
• pp.6-14
• /
• 2010

Pretreatment of cellulosic biomass is necessary before enzymatic saccharification and fermentation. Extrusion is a well established process in food industries and it can be used as a physicochemical treatment method for cellulosic biomass. Aqueous ammonia soaking treatment at mild temperatures ranging from 60 to $80^{\circ}C$ for longer reaction times has been used to preserve most of the cellulose and hemicellulose in the biomass. The objective of this study was to evaluate the effect of extrusion treatment on aqueous ammonia soaking method. Extrusion was performed with miscanthus sample conditioned to 2mm of particle size and 20% of moisture content at $200^{\circ}C$ of barrel temperature and 175rpm of screw speed. And then aqueous ammonia soaking was performed with 15%(w/w) ammonia solution at $60^{\circ}C$ for 1, 2, 4, 8, 12 hours on the extruded and raw miscanthus samples respectively. In the combined extrusion-soaking treatment, most compositions removal occurred within 1~2 hours and on a basis of 1 hour soaking treatment values, cellulose was recovered about 85% and other compositions, including hemicellulose, are removed about 50% from extruded miscanthus sample. The combined extrusion-soaking treated and soaking only treated samples were subjected to enzymatic hydrolysis using cellulase and ${\beta}$-glucosidase. The enzymatic digestibility value of combined extrusion-2 hours soaking treated sample was comparable to 12 hours soaking only treated sample. It means that extrusion treatment can shorten the conventional long reaction time of aqueous ammonia soaking. The findings suggest that the combination of extrusion and soaking is a promising pretreatment method to solve both problems for no lignin removal of extrusion and long reaction time of aqueous ammonia soaking.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2011년도 춘계학술대회 초록집
• /
• pp.179.1-179.1
• /
• 2011

Pretreatment of cellulosic biomass is necessary before enzymatic saccharification and fermentation. The objective of this study was to evaluate the effect of combined aqueous ammonia-dilute sulfuric acid treatment on cellulosic biomass. Miscanthus was pretreated using aqueous ammonia and dilute sulfuric acid solution under high temperature and pressure conditions to be converted into bioethanol. Aqueous ammonia treatment was performed with 15 %(w/w) ammonia solution at $150^{\circ}C$ of reaction temperature and 20 minutes of reaction time. And then, dilute sulfuric acid treatment was performed with 1.0 %(w/w) sulfuric acid solution at $150^{\circ}C$ of reaction temperature and 10 minutes of reaction time. The compositional variations of this combined aqueous ammonia-dilute sulfuric acid treatment resulted in 68.0 % of cellulose recovery and 95.7 % of hemicellulose, 81.3 % of lignin, 89.1 % of ash removal respectively. The enzymatic digestibility of 90.5 % was recorded in the combined pretreated Miscanthus sample and it was 14.7 times higher than the untreated sample. The ethanol yield in the Simultaneous Saccharification and Fermentation was 90.4 % of maximum theoretical yield based on cellulose content of the combined pretreated sample and it was about 98 % compared to the ${\alpha}$-cellulose ethanol yield.

• Bulletin of the Korean Chemical Society
• /
• 제17권9호
• /
• pp.798-802
• /
• 1996

The photochemical decomposition of aqueous ammonia in the absence (saturated with argon) and the presence of O2 (saturated with air or oxygen) has been investigated using 184.9 nm UV light. The decomposition of ammonia depended on the concentration of oxygen in the solution. With increasing the concentration of oxygen, the decomposition of ammonia diminishes. Hydrazine is found the major product from the irradiation. In the presence of oxygen, hydrogenperoxide was also produced. The product yields depended also on the concentration of oxygen in the solution. The initial quantum yield of the products and of the ammonia decomposed were determined. Probable reaction mechanisms for the reaction were presented from the products analysis.

• Bulletin of the Korean Chemical Society
• /
• 제29권3호
• /
• pp.555-561
• /
• 2008

In air stripping of ammonia from the aqueous solution, a new removal model was presented considering the equilibrium principles for the ammonia in aqueous solution and between the aqueous and air phase. The effects of pH, temperature and airflow rate on the ammonia removal were evaluated with the model. In addition, the saturation degree of ammonia in air was defined and used to evaluate the effect of each experimental factor on the removal rate. As pH (8.9 to 11.9) or temperature (20 to 50 oC) was increased, the overall removal rate constants in all cases were appeared to be increased. Our presented model shows that the degrees of saturation were about the same (0.45) in all cases when the airflow condition remains the same. This result indicates that the effect of pH and temperature were directly taken into consideration in the model equation. As the airflow increases, the overall removal rate constants were increased in all cases as expected. However, the saturation degree was exponentially decreased with increasing the airflow rate in the air phase (or above-surface) aeration. In the subsurface aeration the saturation degree remains a constant value of 0.65 even though the airflow rate was increased. These results indicate that the degree of saturation is affected mainly by the turbulence of the aqueous solution and remains the same above a certain airflow rate.

• Journal of Photoscience
• /
• 제6권4호
• /
• pp.177-181
• /
• 1999

The photochemical transformation of carbon monoxide in aqueous ammonia solution has been investigated at 25${\pm}$0.1$^{\circ}C$ using 184.9 nm UV light. Amination and carbonylation processes were carried out by irradiating the aqueous ammonia solution saturated with carbon monoxide, and the formation of formamide, urea, hexamethylenetetramine, formaldehyde, glyoxal and hydrazine was observed. The formation of hydrazine was affected by the presence of ammonia, and the formation of carbonyl compounds such as formaldehyde and glyoxal was influenced by the presence of carbon monoxide. The formation of formamide, urea and hexamethylenetetramine was affected by both ammonia and carbon monoxide. The initial quantum yields of the products were determined and probable mechanisms for the photochemical reaction were presented on the basis of product analysis.

• Korean Chemical Engineering Research
• /
• 제49권3호
• /
• pp.292-296
• /
• 2011

섬유소계 바이오매스의 전처리를 위한 암모니아수에 의한 침지공정(SAA; Soaking in Aqueous Ammonia)은 낮은 온도와 낮은 압력의 조건에서 수행하는 전처리 공정으로 고온고압이 필요로 하는 다른 전처리방법에 비해 그에 대한 비용을 절감할 수 있다는 장점이 있다. 본 연구에서는 다양한 바이오매스를 SAA공정에 적용시켜 그 특성을 보고자 한다. 실험을 행한 전처리 공정의 온도, 반응시간 그리고 암모니아수의 농도는 각각 $50{^{\circ}C}$, 72시간 그리고 15 wt%이다. 전처리 공정에 의해 초본계열은 탈리그닌이 초기 성분에 대해 60%로 되었고 전처리 전의 10-20%에 불과하던 당전환율이 전처리 후에 60-90%의 당전환율로 약 80%가 향상된 것으로 나타났지만 목본계열의 리그닌 성분은 10%정도만 제거되었고 당전환율은 전처리하지 않는 것과 별다른 차이를 보이지 않았다.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2011년도 추계학술대회 초록집
• /
• pp.114.1-114.1
• /
• 2011

Bioenergy production from lignocellulosic biomass and agriculture wastes have been attracted because of its sustainable and non-edible source. Especially, canola is considered as one of the best feedstock for renewable fuel production. Oil extracted canola and its agriculture residues are reuseable for bioethanol production. However, a pretreatment step is required before enzymatic hydrolysis to disrupt recalcitrant lignocellulosic matrix. To increase the sugar conversion, more efficient pretreatment process was necessary for removal of saccharification barriers such as lignin. Alkaline pretreatment makes the lignocellulose swollen through solvation and induces more porous structure for enzyme access. In our previous work, aqueous ammonia (1~20%) was utilized for alkaline reagent to increase the crystallinity of canola residues pretreatment. In this study, significant factors for efficient soaking in aqueous ammonia pretreatment on canola residues was optimized by using the response surface method (RSM). Based on the fundamental experiments, the real values of factors at the center (0) were determined as follows; $70^{\circ}C$ of temperature, 17.5% of ammonia concentration and 18 h of reaction time in the experiment design using central composition design (CCD). A statistical model predicted that the highest removal yield of lignin was 54% at the following optimized reaction conditions: $72.68^{\circ}C$ of temperature, 18.30% of ammonia concentration and 18.30 h of reaction time. Finally, maximum theoretical yields of soaking in aqueous ammonia pretreatment were 42.23% of glucose and 22.68% of xylose.

• 한국가스학회지
• /
• 제20권2호
• /
• pp.49-57
• /
• 2016

암모니아 수용액은 탈질, 의류의 얼룩제거 등 생활전반에 광범위하게 사용되면서 누출사고도 빈번하게 발생하고 있다. 여기에서는 누출사고 시 비상대응에 필요한 영향범위를 비교적 정확하면서 신속하게 계산할 수 있는 간이 산정표와 산정식을 개발하였다. ALOHA 프로그램을 이용하여 일반적으로 유통되는 암모니아 수용액의 농도(10 % ~ 30 %)에 따른 영향거리를 액면의 크기($1m^2{\sim}500m^2$)별로 산정하여 제시하였다. 또한, 농도와 액면의 크기가 영향거리에 미치는 상관관계를 분석하여 해당 값에서 영향거리를 쉽게 계산할 수 있는 산정식을 개발하였다.

• Korean Chemical Engineering Research
• /
• 제53권4호
• /
• pp.417-424
• /
• 2015

본 연구에서는 목질계 바이오매스인 돼지감자 줄기에 대한 전처리 공정을 수행하였다. 공정은 효소 당화 수율을 높이기 위하여 흐름형 침출 전처리 공정에 2단 전처리 공정으로 적용하였다. 전처리 용매로 암모니아수에 의한 탈 리그닌 효과와 황산 용액에 의한 헤미셀룰로오스의 분해가 효소당화 및 발효에 미치는 영향을 확인하였다. 암모니아수와 황산용액을 이용한 2단 전처리 공정을 수행하였다. 먼저 1단계 공정은 40분 동안 $163.2^{\circ}C$의 온도에서 암모니아수로 처리를 진행하였고 다음 2단계 공정은 $169.7^{\circ}C$에서 20분 동안 황산 용액으로 처리를 수행하여 물질수지를 구하였다. 그리고 앞의 공정과 반대의 순서로 황산 용액을 먼저 처리한 후 암모니아수를 처리한 2단 전처리 공정을 수행하였다. 이때 암모니아수를 먼저 처리한 공정에서 글루코오스 생산량은 30.7 g으로 72.4%의 수율이 나타났다. 반대로 황산 용액을 먼저 처리한 후 암모니아수를 처리한 2단 전처리 공정에서는 글루코오스 생산량이 20.9 g으로 49.3%의 수율을 보였다.