• Korean Institute of Interior Design Journal
• /
• v.22 no.5
• /
• pp.328-335
• /
• 2013

This study investigated the ratios of area, according to the domains and functions, of a public library. To this end, 20 public libraries were selected as samples from the 2012 Public Library Construction Casebook and from cases of consulting on the construction and operation of public libraries. The domains of a public library were categorized into data reading, cultural education, operation, common use, and others. There was a large difference in the area ratios between public libraries that were built with the aid of consulting (Group B) and those without consulting (Group A). In functional terms, the data(bookshelf) space and reading space had similar ratios within a data reading room, while the ratio of the library information space was smaller. Within a general data reading room, the ratio of the library information space was 12%, while the ratios of the data space and seating space were 44%, respectively. Moreover, within a data reading room for children, the ratios of the library information space and children's space were adjusted to 14%, respectively, while the data space and seating space each accounted for 36%, with either 3- or 5-decker bookshelves installed. This study has identified how to calculate the area for each domain, capacity of books, and seating capacity by applying area ratios through functions in the data storage domain, along with numbers of books and seats per unit space. This study has also succeeded in calculating the required area and seats for each type of data storage room by applying the number of books that exist. However, this study has its limitation in that the regional characteristics(Metropolis, Small & medium size cities, Rural areas) were not considered because the number of samples was only 20 libraries.

• Asian Pacific Journal of Cancer Prevention
• /
• v.16 no.18
• /
• pp.8605-8611
• /
• 2016

The reliability of using diagnostic binary ratios of particulate carcinogenic polycyclic aromatic hydrocarbons (PAHs) as chemical tracers for source characterisation was assessed by collecting PM10 samples from various air quality observatory sites in Thailand. The major objectives of this research were to evaluate the effects of day and night on the alterations of six different PAH diagnostic binary ratios: An/(An + Phe), Fluo/(Fluo + Pyr), B[a]A/(B[a]A + Chry), B[a]P/(B[a]P + B[e]P), Ind/(Ind + B[g,h,i]P), and B[k]F/Ind, and to investigate the impacts of site-specific conditions on the alterations of PAH diagnostic binary ratios by applying the concept of the coefficient of divergence (COD). No significant differences between day and night were found for any of the diagnostic binary ratios of PAHs, which indicates that the photodecomposition process is of minor importance in terms of PAH reduction. Interestingly, comparatively high values of COD for An/(An + Phe) in PM10 collected from sites with heavy traffic and in residential zones underline the influence of heterogeneous reactions triggered by oxidising gaseous species from vehicular exhausts. Therefore, special attention must be paid when interpreting the data of these diagnostic binary ratios, particularly for cases of low-molecular-weight PAHs.

• Journal of Electrical Engineering and Technology
• /
• v.13 no.3
• /
• pp.1089-1098
• /
• 2018

This study aims at developing and applying a hybrid model to the wind power prediction (WPP). The hybrid model for a very-short-term WPP (VSTWPP) is achieved through analytical data, multiple linear regressions and least square methods (MLR&LS). The data used in our hybrid model are based on the historical records of wind power from an offshore region. In this model, the WPP is achieved in four steps: 1) transforming historical data into ratios; 2) predicting the wind power using the ratios; 3) predicting rectification ratios by the total wind power; 4) predicting the wind power using the proposed rectification method. The proposed method includes one-step and multi-step predictions. The WPP is tested by applying different models, such as the autoregressive moving average (ARMA), support vector machine (SVM), and artificial neural network (ANN). The results of all these models confirmed the validity of the proposed hybrid model in terms of error as well as its effectiveness. Furthermore, forecasting errors are compared to depict a highly variable WPP, and the correlations between the actual and predicted wind powers are shown. Simulations are carried out to definitely prove the feasibility and excellent performance of the proposed method for the VSTWPP versus that of the SVM, ANN and ARMA models.

• Computers and Concrete
• /
• v.29 no.3
• /
• pp.169-186
• /
• 2022

Mortar is produced with different degrees of temperature and ratios of admixture materials. In order to produce strength mortar, the degree of temperature and the ratio of admixture materials must be optimized. This paper examines experimental effects by applying certain degrees of temperature and ratios of admixture materials to statistically understand the changes in the strength of mortar. The Taguchi method is used for the above-mentioned optimization problem. Firstly, factorial ANOVA is used to investigate the difference of means between the experiments. Due to the significant differences in obtained means, the regression analysis is applied. On the other hand, the effects of the varying degrees of temperature and admixture ratios are presented via 3D plots. Finally, the statistical results of ANOVA and Taguchi indicate that degree of temperature and the different ratios of admixture materials can affect the behaviour of mortar under the tests.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 1997.10a
• /
• pp.109-112
• /
• 1997

In this study, we attempt to improve analytical methods in auditing by applying Artificial Intelligence(AI) methods including Artificial Neural Networks(ANN) and Case-Based Reasoning(CBR), and to perform pattern recognition of the investigation signals generated by analytical procedures. Five years of audited financial data from a large-sized firm were used to calculate four commonly applied financial ratios. This exploratory study shows that the use of AI methods to analyze patterns of related fluctuations across numerous financial ratios provides improved performance in recognizing material misstatements within the financial accounts.

• Physical Therapy Korea
• /
• v.23 no.3
• /
• pp.57-67
• /
• 2016

Background: Many previous studies recommended the side-lying hip abduction (SHA) exercise for targeting the gluteus medius (Gmed) and gluteus maximus (Gmax) muscle activity while the decreasing tensor fasciae latae (TFL) activation. Mischoice of hip position and angle in SHA may increase the risk of lower extremity injuries and undesirable muscle activation. However, information is limited on the effect of composite hip flexion angles and hip rotation on the gluteal muscle activity during SHA. Objects: This study aimed to compare muscle activity (Gmed, TFL, and Gmax) and activity ratios (Gmed/TFL, Gmax/TFL, and Gmed/Gmax) using surface electromyography (EMG) during SHA exercise at three different hip flexion angles either with or without internal rotation (IR) in subjects with Gmed weakness. We hypothesized that applying hip flexion and IR during SHA would increase gluteal muscle activity and decrease TFL activity. Methods: Muscle activity and activity ratios in 20 volunteers with Gmed weakness during 6 different SHA were investigated with surface EMG. One-way repeated-measures analysis of variance was used to determine the statistical significance. Results: Significant differences were found among the six different exercises for Gmed ($F_{2,41}=11.817$, p<.001) and Gmax ($F_{3,52}=5.513$, p=.003) muscle activity, and Gmed/TFL ($F_{3,54}=8.735$, p<.001) and Gmax/TFL ($F_{2,37}=4.019$, p=.028) activity ratios. Conclusion: Applying hip flexion is an effective method for increasing gluteal activity, and it elicits great Gmed/TFL and Gmax/TFL activity ratios during SHA in subjects with Gmed weakness.

• The Korean Journal of Applied Statistics
• /
• v.28 no.4
• /
• pp.621-641
• /
• 2015

Benefit-cost ratios are estimated using life-expectancies of the national pension old-age pensioners in Korea and a compared to whole nation. To obtain the ratios, future mortalities are estimated by multiplying the ratios of experienced mortalities for old-age pensioners to those of the whole nation and the future mortalities of the whole nation projected on an expanded CBD model. The results indicate that the life expectancies of old-age pensioners are longer than the whole nation that lead to higher benefit-cost ratios for old-age pensioners.

• Bulletin of the Society of Naval Architects of Korea
• /
• v.22 no.1
• /
• pp.1-8
• /
• 1985

The buckling characteristics of cylindrical shells with a circular hole, under axially compressed loads, have been analyzed and the results have been compared with existed experimental results. Deflection function with decay factor is assumed, and stress distribution around a circular hole in tensioned infinite plate is used for formulating buckling energy function. Applying Rayleigh Ritz procedure to this energy function, characteristic equation of eigenvalue problem is determined. Buckling load is defined by the minimum value of eigenvalues calculated according to several decay factors, and as the radius ratios of a circular hole (a/R) and shell thickness ratios (R/t) are varied, the reducing characteristics of buckling load are studied. As a result, buckling loads are reduced by about 50% according to some radius ratios ($a/R{\geq}0.15$) of circular hole and are not nearly affected by shell thickness ratio(R/t).

• Elastomers and Composites
• /
• v.55 no.4
• /
• pp.281-288
• /
• 2020

A calibration curve is needed to determine the SBR and BR blend ratio of SBR/BR blend rubber compounds using pyrolysis-gas chromatography/mass chromatography (Py-GC/MS) or Py-GC. In general, a calibration curve is obtained using reference SBR/BR vulcanizates with various blend ratios. In this study, the calibration curves were obtained using reference samples made of rubber solutions and were compared to those plotted using the reference SBR/BR vulcanizates. Calibration curves using variations of 1,3-butadiene/styrene, 4-vinylcyclohexene (VCH)/styrene, 2-phenylpropene (PhP)/butadiene, PhP/VCH, 4-phenylcyclohexene (PhCH)/butadiene, and PhCH/VCH ratios with the BR content were examined for the suitability. We found that the calibration curves obtained using the mixed rubber solution references (1,3-butadiene/styrene and PhP/butadiene) could replace those constructed using the reference SBR/BR vulcanizates. The calibration curves of 1,3-butadiene/styrene and PhP/butadiene obtained using the raw references can be used for the determination of the SBR/BR blend ratios by applying some correction factors.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2023.11a
• /
• pp.17-18
• /
• 2023

This study aims to compare the hardness value development characteristics according to the water-cement ratio during a series of experiments to develop a setting estimator for an AI-based concrete finishing automation system. For the test variables, water-cement ratios are varied with 30, 40 and 50%. Proctor penetration test and surface hardness test by setting time estimator are conducted to estimate the setting time. For the effect of water-cement ratios, they did not affect the surface hardness either, while initial set time and final set time are not constant with water-cement ratios.