• Asian Pacific Journal of Cancer Prevention
• /
• 제16권9호
• /
• pp.3945-3949
• /
• 2015

Background: For brachytherapy of cervical cancer, applicator shifts can not be avoided. The present investigation concerned Utrecht interstitial applicator shifts and their effects on organ movement and DVH parameters during 3D CT-based HDR brachytherapy of cervical cancer. Materials and Methods: After the applicator being implanted, CT imaging was achieved for oncologist contouring CTVhr, CTVir, and OAR, including bladder, rectum, sigmoid colon and small intestines. After the treatment, CT imaging was repeated to determine applicator shifts and OARs movements. Two CT images were matched by pelvic structures. In both imaging results, we defined the tandem by the tip and the base as the marker point, and evaluated applicator shift, including X, Y and Z. Based on the repeated CT imaging, oncologist contoured the target volume and OARs again. We combined the treatment plan with the repeated CT imaging and evaluated the change range for the doses of CTVhr D90, D2cc of OARs. Results: The average applicator shift was -0.16 mm to 0.10 mm for X, 1.49 mm to 2.14 mm for Y, and 1.9 mm to 2.3 mm for Z. The change of average physical doses and EQD2 values in Gy${\alpha}/{\beta}$ range for CTVhr D90 decreased by 2.55 % and 3.5 %, bladder D2cc decreased by 5.94 % and 8.77 %, rectum D2cc decreased by 2.94 % and 4 %, sigmoid colon D2cc decreased by 3.38 % and 3.72 %, and small intestines D2cc increased by 3.72 % and 10.94 %. Conclusions: Applicator shifts and DVH parameter changes induced the total dose inaccurately and could not be ignored. The doses of target volume and OARs varied inevitably.

• Journal of Electrical Engineering and Technology
• /
• 제11권6호
• /
• pp.1744-1753
• /
• 2016

The main purpose of this article is a complex hyperthermia applicator system design for treatment of head and neck region. The applicator system is composed of four waveguides with a stripline horn aperture and circular water bolus. The specific absorption rate (SAR) and temperature distribution from this applicator in various numerical phantom models was investigated. For used targets, the treatment planning based on the optimization process made through the SEMCAD X software is added to show the steering possibilities of SAR and thereby temperature distribution. Using treatment planning software, we proved that the SAR and temperature distribution can be effectively controlled (by amplitude and phase changing) improving the SAR and temperature target coverage approximately by 20 %. For the proposed applicator system analysis and quantitative evaluation of two parameters 25 % iso-SAR and $41^{\circ}C$ iso-temperature contours in the treatment area with the respect to sensitive structures in treatment area were defined. To verify our simulation results, the real measurement of reflectivity coefficient as well as the temperature distribution in a homogenous phantom were performed.

• 한국의학물리학회:학술대회논문집
• /
• 한국의학물리학회 2003년도 제27회 추계학술대회
• /
• pp.53-53
• /
• 2003

For evaluating the feasibility of treating recurrent lesions in the vaginal cuff and cervix by hyperthermia, ultrasound applicators were designed, constructed, and characterized. For the treatment A half-cylindrical transducer Cd=1cm, length=lcm) and cylindrical transducer (d=2.5cm, length= 1.5cm) were used to construct ovoid type and cylindrical applicators. For the ovoid type applicator, each element was operated at 1.5MHz and characterized by measuring transducer efficiency and acoustic power distribution. Thermocouple probes were used to measure the temperature rise in phantom. The element sizes used in this study were selected to be comparable for high dose rate brachytherapy colpostat applicator. Each element was powered separately to achieve a desired temperature pattern in a target. The acoustic output power as a function of applied electric power of the element 1 and 2 was linear over this 1 to 40 W range and efficiencies were 32.2${\pm}$3.4% and 46.2${\pm}$0.8%, respectively. The temperature measurements in phantom showed that 6$^{\circ}C$ temperature rise was achieved at 2 cm from the applicator surface. As a conclusion, the ability of the ultrasound colpostat applicator to be used for hyperthermia was demonstrated by measuring acoustic output power, ultrasound field distribution, and temperature rise in phantom. Based on the characteristics of this applicator, it has the potential to be useful for inducing hyperthermnia to the vaginal cuff in clinic.

• Journal of Biosystems Engineering
• /
• 제31권6호
• /
• pp.482-488
• /
• 2006

Application of precision farming technology to rice cultivation could be an effective measure for rice quality improvement and environment-friendly agriculture. This study was conducted to develope a variable rate pneumatic granule applicator. Previous study reported that application uniformity of the prototype machine (C.V. = 23.3%) was not satisfactory. To improve the uniformity, increase of blow-head number from 12 to 16 was suggested. Analysis of the pneumatic conveying system showed that increase of number of blow-head was possible. Three-way variance analysis of the modified applicator showed that inserting length should be changed according to granule metering rate. The range of metering rate from 27.3 to 417.9 g/s were divided into 4 levels and 4 sets of inserting lengths were determined to ensure CV values less than 15%. The revised applicator showed satisfactory C.V. values of 9.4 to 14.6% in the metering rate. Granule conveying pattern was observed using a high speed camera and judged as the homogeneous flow pattern.

• Radiation Oncology Journal
• /
• 제8권2호
• /
• pp.155-162
• /
• 1990

마이크로파온열요법은 피부 및 국소종양에 대한 방사선과 병행요법으로서 치료성과를 얻고 있다. 저자들은 가정용 전기오븐을 이용하여 온도측정 및 조절장치를 할 수 있는 마이크로파온열기를 개발하여 적용가능한 환자를 치료하여 왔다. 그러나 선형단극 안테나로 제작된 applicator는 가열 깊이가 2\~4\;cm$로 낮고 온도분포가 불균일하여 많은 어려움이 있었다. 저자들은 안테나의 길이를 마이크로파의 파장과 같거나 배수로 하여 효율을 높게 하고 모양을 나선형으로 한 applicator를 여러개 제작하여 온열분포를 측정하였다. 안테나 길이가 파장과 같은 12.2cm이고 직경 4 cm 의 나선형모양을 가진 applicator의 온열분포가 대칭적이고 넓으며 (FWHM =3.5 cm) 보다 깊이 가열할 수 있어 ($D_{eff}=4\;cm$) 온열치료에 많은 도움을 줄 수 있다고 사료된다.

• 한국농업기계학회:학술대회논문집
• /
• 한국농업기계학회 1996년도 International Conference on Agricultural Machinery Engineering Proceedings
• /
• pp.519-527
• /
• 1996

Most operation related to the application granular agrochemicals in korea are manual and labour consuming. As a multipurpose granular applicator, a pneumatic granular applicator that can be attached to conventional ride -on machines for paddy field was designed in this study. Experiments and simulations were carried out for determine in the design factors with one fertilizer (DongBu 21-17-17) and one pesticide (SamKong Ivi). The maximum terminal velocity of granular chemicals was estimated as 14.2m/s. A better distribution pattern was obtained at the diffuser having only deflectors without dividing guides. The diffuser spacing 1.0m for the fertilizer and the diffuser spacing 0.8m for the pesticide at the boom height over 0.80m were acceptable for the uniform distribution. In the case that the forward speed of ride-on machines was 0.7m/s, the groove opening and the roller speed of the selected metering device were13mm -15mm at 2 rps for the fertilizer, and 9 mm-11mm at 0.25rps or the pesticide. This study suggested a method of developing a pneumatic applicator for granular agrochemicals.

• Journal of electromagnetic engineering and science
• /
• 제15권1호
• /
• pp.20-25
• /
• 2015

A circularly rotated array for a dual polarized applicator in a superficial hyperthermia system is proposed. The applicator has a wider effective treatment area due to the $180^{\circ}$ phase shift. The dual polarized circularly rotated array (DPCRA) suppresses overheating at the center of the array and helps evenly distribute the heat. This array provides a more effective treatment area than a lattice array when a $2{\times}2$ dual polarized array is fitted to the treatment area. The treatment area is 71.5% of the aperture, whereas the effective treatment areas of the $2{\times}2$ dual polarized lattice array (DPLA) and the single polarized array (SPA) are 57.2% and 38.6% of the same aperture, respectively. The measurement matches the simulation results without blood circulation effects. In a $2{\times}2$ array applicator, the proposed DPCRA has more heat uniformity than the DLA and the SPA.

• 대한방사선치료학회지
• /
• 제18권1호
• /
• pp.13-19
• /
• 2006

목 적: 재발한 vulva 종양의 근접 치료 시 정상조직의 장애와 종양 체적 내의 선량 균등도를 개선하기 위해 modified MUPIT applicator를 자체 고안하였으며 이에 대한 유용성을 평가하고자 한다. 대상 및 방법: Modified MUPIT applicator는 template, cylinder, interstitial needle로 구성 되었으며, 종양 체적을 정하기 위하여 치료 전 CT를 시행하였다. CT 영상을 이용하여 Interstitial needle의 삽입 위치를 결정하고, 수술실에서 template를 치료 부위에 고정을 시키고, cylinder를 vaginal cavity에 삽입한 후, interstitial needle을 종양 체적 내에 삽입하였다. 삽입된 interstitial needle의 정확한 위치를 확인하기 위하여 확인용 CT를 시행하였으며, simulation을 통하여 얻어진 orthogonal film을 이용하여 치료 계획을 수립하였다. 일일 종양 선량은 600 cGy, BID로 3,000 cGy를 조사하였으며, 치료 시 직장 선량을 평가하기 위하여 TLD를 이용하여 anal verge를 기준으로 5개 지점에서의 직장 선량을 측정하였다. 결 과: Modified MUPIT applicator 대한 유용성을 평가하기 위하여 측정된 직장 선량은 34.1 cGy, 57.1 cGy, 103.8 cGy, 162.7 cGy, 165.7 cGy로 측정되었으며, 외부방사선치료(EBRT: External Beam Radiation Therapy), 강내방사선치료(ICR: Intracavitary radiotherapy)와 중첩되는 지점은 34.1 cGy, 57.1 cGy로 매우 우수하게 평가되었다. 결 론: 자체 제작한 modified MUPIT applicator 사용하여 조직 내 근접치료(Interstitial brachytherapy)를 시행함으로써, 외부방사선치료로 접근하기 어려운 종양에 대하여 선량 균등도를 효율적으로 개선할 수 있었고, 직장 선량을 최소화하여 직장의 부작용 발생 확률을 현저히 감소시킬 수 있었다.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 1998년도 추계 학술대회논문집
• /
• pp.102-107
• /
• 1998

Axisymmetric flows in an optical fiber coating applicator were computed by using structured finite volume solver FLUENT. The numerical computations were performed for various draw speeds from 900m/min to 1,200m/min. The physical phenomena in the coating applicator is the main topic of this paper. The results of the simulations covering streamline, pressure, temperature, and fluid-fluid interface are shown in this paper.

• Journal of electromagnetic engineering and science
• /
• 제1권1호
• /
• pp.60-62
• /
• 2001

A novel approach for modeling the thermic endfire interstitial applicator is presented. A hypothetical semi-infinite circular cylinder is added in the endfire direction in order to facilitate the theoretical modeling approach. The Fourier transform and mode-matching technique is utilized to obtain a solution in fast-convergent series Numerical computations for the input impedance are performed to check the Validity of the theoretical model.