• The International Journal of Costume Culture
• /
• 제2권2호
• /
• pp.80-96
• /
• 1999

This research focused on pattern adjustments of the stable knit garment for women. Fourteen different types of the knitted fabrics by 12 gauge, computerized flat bed machines were cut in as one half of the torso front, one half of the torso back, and one side of the sleeves for each of them. Guidelines such as the center front, the center back, the armhole, the bust-line, the waistline, the hip-line the hemline were basted on the torso patterns in the knitted fabrics. Also the grain-line, the elbow-line, and the hemline were basted on the one side of the sleeves in the same as above knitted fabrics. The torso patterns in the knitted fabrics were exhibited on the dress-forms on top of the torso patterns in Muslin, which also have the same guidelines drawn on. The distances between the guidelines on Muslin and those on the knitted fabrics for each set of the sample fabrics were measured every three days for two weeks. The fabric properties of the fourteen knitted fabrics such as fiber contents, stitch density both in the wale and course directions, weight, thickness, stretch & recovery, residual shrinkage, relaxation and drapability were laboratory tested for how these were related to finished appearance of 12 gauge, computerized flat knit garments and also in order to prove the fourteen knitted fabrics fall to a category of such as the stable knit. The results from the investigation revealed that six fabric properties such as stitch density, thickness, stretch recovery, residual shrinkage and relaxation were not so much significant factors as weight and drapability. In conclusion, fabric weight, and drapability of the fabric resulting from fiber contents were the cause of final appearance distortion of garment. When adapting patterns for stabilized, 12 gauge, computerized flat knitted fabrics, the fiber contents of the fabrics should be taken into consideration to reduce the production cost and produce better-fit garments.

• 복식문화연구
• /
• 제16권3호
• /
• pp.588-594
• /
• 2008

Lookism is spread largely because many people think beautiful people are treated better and receive more favors. This trend has been influenced by mass media and impacted by commercial marketing strategy. The expectation for the beauty have risen higher than ever. People expect beautiful body and beautiful face which are more difficult to meet the standard of beauty. People desire tall and skinny body. The purpuse of this study was to find out body image from college females in the age which they are very sensitive to appearance. This research focused to find out how they perceived their own body shape and their perception of the most ideal body shape. Measuring tool for the research was 9 pictures of body silhouette from very skinny to very fat. To analyse the respondents' objective body image, Body Mass Index were employed. The result of this research indicated that there were distinct differences between their subjective body images and ideal body images. This result indicated that they were not satisfied with their own body shape and hence they were not confident towards their body images. Even though their objective bodies were normal or under weight, they still felt they were over weight. This meant their body images were misrepresented. They preferred thinner bodies even though their bodies were perfectly normal and healthy. But these misrepresented body images could be unhealthy physically, psychologically, or socially. These results showed that college females were overly obsessive with superficial appearance rather than improving ones capability to be more competitive in the society. From this research, I tried to find out perception of body image and it's distortion which was debated a lot in our society. I also want to provide basic reference material for establishing the body image study.

• 대한치과보철학회지
• /
• 제35권4호
• /
• pp.706-718
• /
• 1997

Ceramometal crowns are common restorations in fixed prosthodontics because of their casting accuracy, the high strength properties of the metal, and the cosmetic appearance of porcelain. However, deterioration of the initial fit of the metal coping has been observed after the porcelain firing cycle. The distortion due to repeated firing makes it difficult to fit crown margin and elicits microleakage. The major causes of distortion are the residual stress that accumulate during wax-up, casting, cold work and the induced stress caused by the mismatch of porcelain-metal thermal contraction. This study examined the marginal fit changes of metal copings in relation to repeated firing and the effects of heat treatment that reduce the distortion resulted from residual stress. The marginal changes of the copings that were treated with conventional method and those treated with heat before repeated firing, were evaluated. The metal die which represented preparations of a maxillary central incisor was fabricated, and 45 wax patterns were cast with nonprecious metal alloys. The heat treatment of each group was performed as follows. Group 1(control) : Casting - Devesting - Cold work - Firing Group 2 : Casting - Heat treatment - Devesting - Cold work - Firing Group 3 : Casting - Devesting - Cold work - Reinvesting - Heat treatment - Devesting - Firing The copings were fired 3 times. After each firing, the marginal fit changes were measured with inverted metallurgical microscope at the 4 reference points located at labial, lingual, and both proximal surface. Measurements were compared, and statistically analyzed. The results were as follows ; 1. In all groups, the highest value of marginal fit changes of the copings studied were found after the first firing cycle. 2. When the distortion of each experimental group at the first firing cycle were compared, group 1 exhibited the greatest changes($20-27{\mu}m$), followed by group 2($9-13{\mu}m$), and group 3($8-10{\mu}m$). 3. The copings treated with heat before devesting(group 2) revealed significantly smaller marginal fit changes than the copings treated with conventional method(group 1). (p<0.01) 4. The copings treated with heat after reinvesting(group 3) revealed significantly smaller marginal fit changes than the copings treated with conventional method(group 1). (p<0.01) 5. No siginificant differences in marginal fit changes were found between the copings treated with heat before devesting(group 2) and the copings treated with heat after reinvesting(group 3). (p>0.01)

• 한국방송∙미디어공학회:학술대회논문집
• /
• 한국방송∙미디어공학회 2018년도 추계학술대회
• /
• pp.90-92
• /
• 2018

본 논문에서는 입력 영상을 카메라의 자세 정보에 따라 적절히 와핑한 후 이들을 심(Seam)을 따라 이어붙인 360VR 에서 갑작스런 객체 출현에 의해 중첩 영역에서 발생하는 왜곡 문제를 해결할 방법을 제안한다. 임의의 객체가 나타났을 때, 객체의 윤곽선을 반영하여 심(Seam)을 재설정함으로써 객체가 우그러지거나, 잘려나가는 등의 왜곡 문제를 해결한다. 이를 위해 본 논문에서는 가우시안(Gaussian) 혼합 모델 기반 전경/배경분리에 의한 움직이는 객체 추출, 객체 윤곽선 검출, 윤곽선에 기반한 심(Seam) 조정, 새로운 심(Seam) 기반 스티칭으로 왜곡을 없애는 방법을 제안하였다. 그리고 이를 실제 촬영 영상에 적용하여 왜곡 개선 효과를 보였다.

• Journal of Korean Neurosurgical Society
• /
• 제66권3호
• /
• pp.298-307
• /
• 2023

Remarkable advances in neonatal care have significantly improved the survival of extremely low birth weight infants in recent years. However, intraventricular hemorrhage (IVH) continues to be a major complication in preterm infants, leading to a high incidence of cerebral palsy and cognitive impairment. IVH is primarily caused by disruption of the fragile vascular network of the subependymal germinal matrix, and subsequent ventricular dilatation adversely affects the developing infant brain. Based on recent research, periventricular white matter injury is caused not only by ischemia and morphological distortion due to ventricular dilatation but also by free iron and inflammatory cytokines derived from hematoma and its lysates. The current guidelines for the treatment of posthemorrhagic hydrocephalus (PHH) in preterm infants do not provide strong recommendations, but initiating treatment intervention based on ultrasound measurement values before the appearance of clinical symptoms of PHH has been proposed. Moreover, in the past decade, therapeutic interventions that actively remove hematomas and lysates have been introduced. The era is moving beyond cerebrospinal fluid shunt toward therapeutic goals aimed at improving neurodevelopmental outcomes.

• 한국아동복지학
• /
• 제26호
• /
• pp.7-30
• /
• 2008

의학기술의 발전으로 소아암 환아의 생존율이 1960년대 30%미만에서 최근 75%이상으로 향상되었다. 이에 따라 소아암은 더 이상 불치병이 아닌 만성질환으로 분류되고 있으나, 장기간의 투병생활로 인해 소아암 환아들은 신체적, 심리사회적 문제를 겪고 있다. 특히 외모에 관심이 많고, 또래관계가 중요한 10대 소아암 환아들에게 있어 신체적, 심리사회적 변화는 이들의 신체상과 질병적응에 영향을 미칠 것으로 예상된다. 이에 본 연구에서는 소아암 환아의 신체상(신체왜곡도) 및 질병적응 수준을 알아보고, 인구사회학적 특성, 질병관련 특성 및 신체상이 소아암 환아의 질병적응에 미치는 영향에 대해 알아보았다. 본 연구는 2007년 10월 22일부터 11월 16일까지 자기기입식 설문조사로 이루어졌으며, 조사대상자는 암진단 후 3년 이내의 10세에서 18세 환아 82명이었다. 수집된 자료는 기술통계, t-검정, 상관관계, 위계적 다중회귀방법으로 분석하였다. 분석결과, 연령, 학교생활여부, 신체상이 소아암 환아의 질병적응에 영향을 미치는 요인으로 나타났다. 즉, 연령이 높을수록, 학교생활을 하고 있는 환아가 그렇지 않은 환아보다, 신체왜곡도가 낮을수록 질병적응에 긍정적 영향을 미치는 것으로 나타났다. 소아암 환아의 질병적응을 돕기 위해서는 소아암 환아가 학교생활을 지속할 수 있도록 돕는 정책적 제도 구축, 긍정적 신체상 형성을 위한 프로그램 개발, 소아암 환아의 연령을 고려한 심리사회적 접근 등이 필요하며, 이를 위해 사회복지사의 적극적인 개입이 이루어져야 할 것이다.

• 복식문화연구
• /
• 제26권1호
• /
• pp.73-81
• /
• 2018

Developments in the recent media era has made distortion possible in accordance with changes in the fashion industry as new clothing, technologies, and fusions have become available. Nevertheless, previous studies of specific types of clothing, and their classification for the purpose of research are lacking. Thus, this study examines the development of the Pomme de look and the form of modern variant that appears in fashion clothing and new technologies, and largely examines the clothing case to clean it up. The method employed is leading research that examines the transformation about the concept of the Pomme de look with regard to the fashion about the type of look in the 2000s and onwards. This is organized in accordance with the analytical and physical characteristics, and the esthetic aspects of the results are as follows. The conclusions reached as follows are based on this; first, the physical characteristic manner when based on previous looks, the two-dimensional deformation for making clothes, if there was a simple way, now has more dimensions. Clothes are made in a complex manner and variations emerge. Second, esthetic characteristics strive for beauty while also displaying the modified and more complex manners of clothing that are emerging. Third, the fusion clothing with machines effects to physical and psychological changes through the details about how the sensor is worn. The enemy, the appearance of distortion, and clothing are emerging. This is expected to grow further based on the rapid development of new technologies and the transformation of Pomme de look and design will appear in more varied ways to create a convergence.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2005년도 Proceedings of ISRS 2005
• /
• pp.628-632
• /
• 2005

Remote sensing through atmospheric turbulence had been hard works for a long time, because wavefront distortion due to the Earth's atmospheric turbulence deteriorates image quality. But due to the appearance of adaptive optics, it is no longer difficult things. Adaptive optics is the technology to correct random optical wavefront distortions in real time. For past three decades, research on adaptive optics has been performed actively. Currently, most of newly built telescopes have adaptive optical systems. Adaptive optical system is typically composed of three parts, wavefront sensing, wavefront correction and control. In this work, the wavefront sensing technology for adaptive optical system is treated. More specifically, shearing interferometers and Shack-Hartmann wavefront sensors are considered. Both of them are zonal wavefront sensors and measure the slope of a wavefront. . In this study, the shearing interferometer is made up of four right-angle prisms, whose relative sliding motions provide the lateral shearing and phase shifts necessary for wavefront measurement. Further, a special phase-measuring least-squares algorithm is adopted to compensate for the phase-shifting error caused by the variation in the thickness of the index-matching oil between the prisms. Shack-Hartmann wavefront sensors are widely used in adaptive optics for wavefront sensing. It uses an array of identical positive lenslets. And each lenslet acts as a subaperture and produces spot image. Distortion of an input wavefront changes the location of spot image. And the slope of a wavefront is obtained by measuring this relative deviation of spot image. Structures and measuring algorithms of each sensor will be presented. Also, the results of wavefront measurement will be given. Using these wavefront sensing technology, an adaptive optical system will be built in the future.

• 한국멀티미디어학회논문지
• /
• 제18권9호
• /
• pp.1027-1038
• /
• 2015

For last several decades, the color correction methods have been proposed for HDR(high dynamic range) images. However, color distortion problems take place after correcting the colors such as halos, dominant color as well known. Accordingly, this article presents a novel approach in which the method consists of tone-mapping method and cone response function. In the proposed method, the tone mapping method is used to improve the contrast in the given HDR image based on chromatic and achromatic based on the CIEXYZ tristimulus value, expressed in c/m². The cone response function is used to deal with mismatch between corrected image and displayed image as well as to estimate various human visual effects based on the CMCAT2000 color appearance model. The experimental results show that the proposed method yields better performance of color correction over the conventional method in subjective and quantitative quality, and color reproduction.

• 대한치과보철학회지
• /
• 제38권3호
• /
• pp.366-374
• /
• 2000

FRC/ceromer system provides the clinician with a durable, flexible, and esthetic alternative to conventional porcelain fused to metal crowns. FRC is the matrix which is silica-coated and embedded in a resin matrix. The ceromer material which is a second generation indirect composite resin contains silanized, microhybrid inorganic fillers embedded in a light-curing organic matrix. FRC/ceromer restoration has a several advantages: better shock absorption, less wear of occluding teeth, translucency, color stability, bonding ability to dental hard tissues, and resiliency. It has versatility of use including inlay, onlay, single crown, and esthetic veneers. With adhesive technique, it can be used for single tooth replacement in forms of inlay adhesion bridge. In single tooth missing case, conventional PFM bridge has been used for esthetic restoration. However, this restoration has several disadvantages such as high cost, potential framework distortion during fabrication, and difficulty in repairing fractures. Inlay adhesion bridge with FRC/ceromer would be a good alternative treatment plan. This article describes a cases restored with Targis/Vectris inlay adhesion bridge. Tooth preparation guide, fabrication procedure, and cementation procedure of this system will be dealt. The strength/weakness of this restoration will be mentioned, also. If it has been used appropriately in carefully selected case, it can satisfy not only dentist's demand of sparing dental hard tissue but also patient's desire of seeking a esthetic restorations with a natural appearance.