• International Journal of Contents
• /
• v.12 no.4
• /
• pp.53-61
• /
• 2016

Although extensively developed, optical music recognition systems have mostly focused on musical symbols (notes, rests, etc.), while disregarding the chord symbols. The process becomes difficult when the images are distorted or slurred, although this can be resolved using optical character recognition systems. Moreover, the appearance of outliers (lyrics, dynamics, etc.) increases the complexity of the chord recognition. Therefore, we propose a new approach addressing these issues. After binarization, un-distortion, and stave and lyric removal of a musical image, a rule-based method is applied to detect the potential regions of chord symbols. Next, a lexicon-driven approach is used to optimally and simultaneously separate and recognize characters. The score that is returned from the recognition process is used to detect the outliers. The effectiveness of our system is demonstrated through impressive accuracy of experimental results on two datasets having a variety of resolutions.

• Bulletin of the Korean Chemical Society
• /
• v.31 no.4
• /
• pp.999-1003
• /
• 2010

Raman spectra of a single layer graphene sheet placed in different gold substrates were obtained and are discussed in the context of surface enhanced Raman scattering (SERS). The gold substrates were composed of a combination of a thermally deposited gold film and a close-packed gold nanosphere layer. The SERS effects were negligible when the excitation wavelength was 514 nm, while the Raman signals were enhanced 3-to 50-fold when the excitation wavelength was 633 nm. The large SERS enhancement accompanied a spectral distortion with appearance of several unidentifiable peaks, as well as enhancement of a broadened D peak. These phenomena are interpreted as the local field enhancement in the nanostructure of the gold substrates. The difference in the enhancement factors among the various gold substrates is explained with a model in which the spatial distribution and polarization of the local field and the orientation of the inserted graphene sheet are considered important.

• The Journal of Information Systems
• /
• v.21 no.1
• /
• pp.93-116
• /
• 2012

Internet users' desire to share shopping experiences has resulted in the appearance of the paradigm shift called social commerce, which combines social media with commerce. However, while foreign market realizes social commerce in a various way, current domestic social commerce market still seems to be highly filled with social shopping sites offering 50 percent discount, thus causing concerns about market distortion from a cutthroat competition. In order to overcome the limitations of social commerce remaining in the early stage, and to enhance the communication among consumers, this study conducted an empirical study on the social-commerce business models design based on context. The results of the study brought the imaginary, optimal combination model by conjoint analysis, using the segmented group through cluster analysis. To overcome the uniformity of social commerce and to enhance communication among consumers, the context-based optimal combination model should be proposed as the alternative social commerce business model in the domestic market which remains as a simple group-purchase function. Furthermore, this study will be used as an informative reference designing customer oriented service model for social commerce business.

• Journal of Korea Multimedia Society
• /
• v.16 no.1
• /
• pp.29-41
• /
• 2013

The digital camera is impossible to preserve the appearance of a scene containing high dynamic range due to a limitations of the sensing hardware. The Retinex was proposed on the purpose to solve these problems. While the Retinex enhances visibility and color constancy, it sometimes suffers from color distortion, halo effect and reduced global contrast. This paper presents an advanced Retinex algorithm working on the YCbCr color coordinate to reduce the processing time and to improve the global contrast and color. Simulation results show that our algorithm significantly reduces the total processing time, and provide the superior result image by improving the global contrast and color consistency as well as by reducing the halo effect around the boundaries.

• The Research Journal of the Costume Culture
• /
• v.30 no.2
• /
• pp.226-242
• /
• 2022

For clothing items that combine the top with the bottom, such as a jumper suit, it is necessary to design original forms to develop clothes in various styles that can satisfy aesthetic and functional needs. Therefore, to determine the original forms of women's jumper suits, this study aimed to analyze the patterns of women's jumper suits being sold in the market comparatively and evaluate their fitness. For the study method, this researcher obtained five types of women's jumper suits from local brands and compared the patterns' measured sizes, then conducted exterior evaluation on the surplus according to five different movements and analyzed the values of distortion of clothing pressure comparatively. According to the results, in the basic posture, brands A and C received favorable results, while in the other movements, brand B, which had the biggest surplus on the bottom, was evaluated favorably. In conclusion, in the patterns of women's jumper suits, a bigger surplus is added to either the crotch length or crotch girth rather than the top length, and the top and the bottom tend to have a different surplus according to the design. In addition, based on the values of body surface lengths according to the range of movements, this study suggests that an additional surplus be added to the length.

• Journal of Korean Society of Steel Construction
• /
• v.19 no.6
• /
• pp.559-573
• /
• 2007

Orthotropic steel decks are manufactured by welding thin plates therefore it is inevitable that there are abundant works of welding process. On connection of transverse rib web, crossing point of longitudinal rib, transverse rib and deck plate and cut-out parts of transverse rib are the significant position of stress concentration because of out of plane and oil-canning deformation caused by longitudinal rib distortion with shear force and distortion. At the current research, the crossing point where the orthotropic steel decks's effect of improving fatigue performance are high, not placing scallop and diaphragm which have same plane with transverse rib placed inside of longitudinal rib at the same time, the reduce effects of stress concentration at the cut-out section and the crossing are high. Especially the installation of the diaphragm causing great effects based on research results to stress concentration appearance reduce effects at the cut-out section, putting radius of curvature of the diaphragm's top and bottom as a target, as a result of carrying out the parametric analysis an optimal diaphragm form that has great effects in fatigue performance came to a conclusion. Also based on optimal diaphragm form, an advantage of the diaphragm optimal setting position for improvement of the fatigue performance came to a conclusion.

• International Journal of Highway Engineering
• /
• v.10 no.2
• /
• pp.125-133
• /
• 2008

Achieving consistent geometric design is an important goal in highway design to ensure obtaining safe, economical and smooth traffic operation. Most evaluation of consistency is based on 'speed change' in speed profile. According to literature, the speed depends on geometric elements, speed on tangent section prior to a curve, and background around roads. Especially, the radius is the most main element mentioned in various literature. Therefore, this paper shows two ways of calculating horizontal radius on real road, that is, three-dimensional road. First of all, the radius of horizontal curve is calculated based on physical method. The calculated radius contains not only superelevation but also longitudinal grade while the current minimum radius is calculated by considering superelevation and side friction according to the point-mass equation. Secondly, the problem of composed curves with distorted appearance by overlaying sag or crest vertical alignment has been known. To quantify the extent of distortion effects, the method of calculation of real seen so called 'Perspective Radius' is developed. The paper presents the perspective radius and recommended perspective radius.

• Journal of the Korean Ceramic Society
• /
• v.50 no.2
• /
• pp.142-148
• /
• 2013

Conventional cold isostatic pressing, slip casting, and filter pressing are not completely suitable for fabricating large plates because of disadvantages such as the high cost of equipment and formation of density gradient. These problems could be avoided by employing pressure-vacuum hybrid slip casting (PVHSC). In the PVHSC, the consolidation occurs not only by the compression of the slip in casting room, but also by vacuum sucking of the dispersion medium around the mold. We prepared the alumina bodies by the PVHSC in a static- or stepwise-pressure manner for loading up to 0.5 MPa using an aqueous slip. The green bodies were dried at $30^{\circ}C$ with 40 ~ 80% relative humidity. Under static pressure, casting induced a density gradient in the formed body, resulting in cracking and distortion after the firing. However, the stepwise pressure loading resulted in green bodies with homogeneous density, and the minimization of the appearance of those defects in final products. Desirable drying results were obtained from the cast bodies dried with 80% RH environment humidity. When sintered at $1650^{\circ}C$ for 4 h, the alumina plate made by stepwise-pressure casting reached full density (> 99.7% relative density).

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.41 no.1
• /
• pp.49-55
• /
• 2017

Welding deformation is a permanent deformation that is caused in structures by welding heat. Welding distortion is the primary cause of reduced productivity, due to welded structural strength degradation, low dimensional accuracy, and appearance. As a result, research and numerous experiments are being carried out to control welding deformation. The aim of this study is to analyze the mechanism of longitudinal bending deformation due to welding. Welding experiments and numerical analyses were performed for this study. The welding experiments were performed on 4 mm and 8.5 mm thickness steel plates, and the numerical analysis was conducted on the welding deformation using the FE software MSC.marc.

• Archives of Plastic Surgery
• /
• v.37 no.3
• /
• pp.250-255
• /
• 2010

Purpose: Pincer nail is a relatively rare deformity characterized by an increase in transverse curvature along the longitudinal axis of the nail. This curvature commonly increases from proximal to distal end of nail, leading to pinching, curling, and distortion of the underlying soft tissue and resulting frequently in severe pain. Numerous surgical procedures have been reported. Preserving the width of the nail in the correction of the pincer nail is very important for functional and aesthetic reasons. We report the results of the correction of the pincer nail using autogenous dermofat graft with a good result. Methods: From May 2006 to September 2008, dermofat graft was performed in 6 patients with pincer nail. Patients were four women and two men, and the average age was 51. The affected digits were the unilateral great toes in four patients and the unilateral thumbs in two patients. Average follow-up period was 13 months. Surgical procedure was removal of nail using an elevator to avoid damage to the nail bed. An incision was created in distal portion of hyponychium. Paronychium was dissected from distal phalanx by periosteal elevator through incision of hyponychium and tunnel was made. Then dermofat grafts harvested from inguinal area were inserted into the tunnel. Finally, a silicone sheet was inserted eponychial fold for prevention of synechia. Objective assessment was evaluated by use of the width index and height index. Results: All patients reported resolution of the pain and soft tissue pinching sensation that they had before the operation. There was good adherence between the nail plate and the underlying nail bed. The nails have regrown and were corrected in a normal and flattened appearance. The width index and height index were improved. Conclusion: The autogenous dermofat graft seems to provide an effective treatment of the pincer nail with preservation of the nail matrix.