• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.26 no.2
• /
• pp.349-356
• /
• 2002

For two kinds of 25Cr-20Ni stainless steels, STS310J1TB and STS310S with and without a small amount of Nb and N, creep behavior has been studied in a stress and temperature range from 147 to 392 MPa and from 923 to 773 K with a special reference to tertiary creep. The average creep life of STS310J1TB was about 100 times longer than that of the STS310S. The apparent activation energy for the initial creep rate was 330 kJ/mol in STS310J1TB, while that of the STS310S was 274kJ/mol in a power law creep region and 478 kJ/mol in a region of power law breakdown (PLB). The activation energy for STS310S below PLB is close to the for self-diffusion. When compensating for the temperature dependence of the Young's modulus and the omega value, it was found that the apparent activation energy for STS310J1TB was reduced to the activation energy for diffusion of chromium atom in gamma steel. The stress exponent of STS310S was about 12.3 above PLB and 5.1 in a power law creep region. Notwithstanding that the creep condition for STS310J1TB was in a power law creep region, its stress exponent was 7.9 larger than that of STS310S corresponding to the same creep conditions. This was ascribed to the presence of fine precipitates in STS310J1TB.

• Journal of Nutrition and Health
• /
• v.29 no.7
• /
• pp.788-805
• /
• 1996

This study was performed to investigate effects of examination-stress and protein supplementation on nitrogen metabolism and blood protein levels of Korean college students. Experiment was conducted at the beginning of a academic term and during midterm examination. During midterm examination, subjects were classified into two groups randomly : protein supplemental group(male n=6, female n=10) and placebo group(male n=4, female n=9). Protein capsules(2g/day) above 10% of indispensible amino acids requirement estimates were given to supplemental group for 10 days. At the begining of the term, male students(n=12) ingested 223.15mgN/kg/d, excreted 20.7mgN/kg/d in feces, and excreted 94.31mgN/kg/d in urine. Their apparent protein protein digestibility was 90.72%, true N balance was +100.11mgN/kg/d, and the mean maintenance N requirement of mixed Korena diet calculated was 112.13mgN/kg/d. Female students(n=19) ingested 171.44mgN/kg/d, excreted 22.13mgN/kg/d in feces, and excreted 122.92mgN/kg/d in urine. Their apparent protein digestibility was 86.76%, true N blance was + 18.39mgN/kg/d, and the mean maintenance N requirement calculated was 135.31mgN/kg/d. Blood levels of serum total protein, albumin, and BUN were within normal range. During midterm examination, fecal and urinary N excretions of female subjects(n=19) were increased, especially urea N markedly, and urea N/creatinine N ratio was augumented significantly. Apparent protein digestibility of male subjects(n=10) was decreased. Examination-stress showed 8.05mgN/kg/d (7.2%) increase of mean maintenance N requirement in male and 8.55mgN/kg/d(6.3%) increase in female students in comparison with that of the beginning of the term. Serum total protein and albumin levels showed no significant change, but serum transferrin level of female were decreased significantly. During midterm examination, females supplemented with protein capsules(2g/d)had no significant increase in fecal and urinary N excretions.

• Proceedings of the KSME Conference
• /
• 2001.11a
• /
• pp.117-122
• /
• 2001

For two kinds of 25Cr-20Ni stainless steels, SUS310J1TB TB and SUS310S with and without a small amount of Nb and N, creep behavior has been studied in a stress and temperature range from 147 to 392MPa and from 923 to 973K with a special reference to tertiary creep. The average creep life of SUS310J1TB was about 100 times longer than that of the SUS310S. The apparent activation energy for the initial creep rate was 330 kJ/mol in SUS310J1TB, while that of the SUS310S was 274 kJ/mol in a power law creep region and 478 kJ/mol in a region of power law breakdown (PLB). The activation energy for SUS310S below PLB is close to the that for self-diffusion. When compensating for the temperature dependence of the Young's modulus and the omega value, it was found that the apparent activation energy for SUS310J1TB was reduced to the activation energy for diffusion of chromium atom in a gamma steel. The stress exponent of SUS310S was about 12 above PLB and 5.1 in a power law creep region. Notwithstanding that the creep condition for SUS310J1TB was in a power law creep region, its stress exponent was 8.3 larger than that of SUS310S corresponding to the same creep conditions. This was ascribed to the presence of fine precipitates in SUS310J1TB.

• Geomechanics and Engineering
• /
• v.11 no.5
• /
• pp.639-655
• /
• 2016

The effect of particle breakage and intermediate principal stress ratio on the behaviour of crushable granular assemblies under true triaxial stress conditions is studied using the discrete element method. Numerical results show that the increase of intermediate principal stress ratio $b(b=({\sigma}_2-{\sigma}_3)/({\sigma}_1-{\sigma}_3))$ results in the increase of dilatancy at low confining pressures but the decrease of dilatancy at high confining pressures, which stems from the distinct increasing compaction caused by breakage with b. The influence of b on the evolution of the peak apparent friction angle is also weakened by particle breakage. For low relative breakage, the relationship between the peak apparent friction angle and b is close to the Lade-Duncan failure model, whereas it conforms to the Matsuoka-Nakai failure model for high relative breakage. In addition, the increasing tendency of relative breakage, calculated based on a fractal particle size distribution with the fractal dimension being 2.5, declines with the increasing confining pressure and axial strain, which implies the existence of an ultimate graduation. Finally, the relationship between particle breakage and plastic work is found to conform to a unique hyperbolic correlation regardless of the test conditions.

• Geomechanics and Engineering
• /
• v.14 no.6
• /
• pp.581-588
• /
• 2018

In order to explore the comprehensive evaluation means of the extent of hydraulic fracturing region in coal seams, we analyzed the feasibility of detecting the response of coal rock direct current (DC) apparent resistivity to hydraulic-fracturing using Archie's theory, and conducted experimental researches on the response of DC resistivity in the hydraulic fracturing process using small-scale coal rock samples. The results show that porosity and water saturation are the two factors affecting the apparent resistivity of coal rock while hydraulic fracturing. Water has a dominant effect on the apparent resistivity of coal rock samples. The apparent resistivity in the area where water flows through is reduced more than 50%, which can be considered as a core affect region of hydraulic fracturing. Stress indirectly impacts the apparent resistivity by changing porosity. Before hydraulic fracturing, the greater axial load applied, the more serious the rupture in the samples, resulting in the greater apparent resistivity. Apparent resistivity testing is a potential regional method to evaluate the influence range of hydraulic fracturing in coal seams.

• The Korean Journal of Zoology
• /
• v.35 no.4
• /
• pp.456-465
• /
• 1992

The 94 KDa glucose-resulsted Protein (SH 94), one of stress Proteins, is a Ca2+-binding protein in the endoplasmic reticulum (ER). In this study, the possible effect of Ca2+ on the native conformation of grp 94 was examined. When the purified grp 94 was analyzed by Sel filtration in the presence of either EGTA or CaCl2, it was eluted with apparent molecular weight (MW) of 100 KDa in both cases. When similarly analyzed with microtome or cell Ivsate, however, srp 94 was eluted with apparent IW of 200 KDa in the presence of E6TA, while with apparent MW of 100 KDa in the presence of CaCl2, indicating possible association of grp 94 with one or more other proteins in the absence of CaCl2. Consequently, immunoprecipitation with anti-grp 94 was carried out to determine which proteins specifically interact with grp 94. It is sho%un that srp 94 may interact, in a Ca2+_dependent manner. with other proteins including BiP (grp 78) which is also a stress protein in the ER.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 1994.03a
• /
• pp.101-108
• /
• 1994

The sheet perforated with a uniform triangular pattern of round holes and subjected to in-plane stress f arbitrary biaxiality was investigated. The equivalent continuum approach was employed to develop a theoretical model for global analysis, which includes defining a yield criterion and the strain hardening in terms of apparent stresses and apparent strains. Finit element analysis and experiment tension test were performed to examine the validity of proposed yield criterion and strain hardening models of perforated sheets.

• Proceedings of the KSME Conference
• /
• 2004.11a
• /
• pp.388-393
• /
• 2004

Creep behavior of Ti had been studied in a stress from 9.8 to 29.4 MPa and temperature rang from 873K to 973K with a special reference to tertiary creep. It was found that stress exponent of Ti was larger than that of the general pure metal and the compound metal. The relationship between true strain and strain rate in tertiary creep was appeared as the equation, $ln{\dot{e}}$ = $ln{\dot{e}}_{0}$ + ${\Omega}$ e Also, Apparent activation energy of was appeared as 274.92kJ/mol by using the equation ${\dot{\varepsilon}}_{0}$ = A ${\sigma }_{0}^{\ast_0}$ exp$(-Q_{0}/RT)$

• 연구논문집
• /
• s.30
• /
• pp.93-99
• /
• 2000

Electro-Rheological(ER) fluids change their apparent viscosity according to the electric field strength. The electrical and rheological properties of zeolite based the ER fluids were reported. The electric field dependent yield stress are obtained from experimental investigation on the Bingham property of the ER fluid. Using ER fluids, it is possible to directly interface between electric drop and flow rate of the ER fluid was hydraulic control valve measured under application of an electric field. The purpose of the present study is pressure drop measurement of an ER valve by using strain gage. The performance characteristics of the valve system are evalusted in terms of pressrue fixed with respect to the intensity of employed electric fields and flow rates. As a result, it is esperimentally confirmed that pressure control valve using ER fluids applicable to use in hydraulic power systems.

• The Journal of Korean Academy of Prosthodontics
• /
• v.33 no.3
• /
• pp.397-412
• /
• 1995

The purpose of this study was to analyze the stress distribution in the dentin and post structures by the various post core materials and the amount of remaining coronal tooth structures. The 2-dimensional finite element models of mandibular 2nd premolars was divided into seven types according to the various amount of remaining coronal tooth structures. All types were modeled using equal length, diameter and shape of the post. 2 types of post and core materials were used : 1) cast gold post and core 2) stainless steel post and compsite resin core 10 Newton force was applied as follows 1) vertical force on occlusal fossa 2) $45^{\circ}$ oblique force on buccal surface of buccal cusp tip The results were as follows : 1. There was no apparent difference in the pattern of stress distribution according to the amount of remaining coronal tooth structure. 2. There was no apparent difference in the pattern of stress distribution within the dentin according to the post and core materials. A cast gold post and core generated lower dentin stress than a stainless steel post and resin core. 3. Max. dentinal stress resulting from vertical force was observed in the lingual side of dentin around the crown margin.This stress resulting from oblique force was observed in the lingual root surface of alveolar bone crest level.