• Journal of Forest and Environmental Science
• /
• v.29 no.2
• /
• pp.109-115
• /
• 2013

Fast-grown wood generally contains a high proportion of juvenile wood that results in inferior dimensional stability and durability against biological deteriorations. In the present research, the Acacia mangium wood from plantation forests in Vietnam was treated with high temperature in air. The effects of heat treatment on physical properties of Acacia mangium wood, including mass loss (ML), water absorption (WA), water-repellent effectiveness (WRE) and anti-swelling efficiency (ASE) were examined. The results showed that the dimensional stability and the water-repellent effectiveness are increased by about 15-46% and 8-18%, respectively. However, the mass and dimension of wood are decreased. The results also indicated that both treatment temperature and treatment duration significantly affect the wood properties of Acacia mangium. It is thus concluded that heat treatment demonstrates an interesting potential to improve the wood quality of Acacia mangium for solid timber products. This technology provides an environmentally safe method of protecting sustainable common woods to give a new generation of value-added biomaterials with increased stability without the use of toxic chemicals.

• Journal of the Korean Wood Science and Technology
• /
• v.48 no.6
• /
• pp.780-790
• /
• 2020

In this study, the cell-wall microstructure and anti-swelling effectiveness (ASE) of heat-treated larch wood were evaluated and the correlation between them was analyzed. For this purpose, some larch lumbers were heat-treated for 12, 18, and 24 hours at temperatures of 190℃ and 220℃. By observing the scanning electron microscopy cross-sectional image of the heat-treated larch, it was confirmed that the shape of heat-treated wood cell changed, the cut-section of the wood cell wall was rough, and the intercellular space has become wide as the intercellular bonds had broken because of heat-treatment. In addition, the evaluation of the swelling for each treatment condition revealed that, as the heat-treatment temperature and duration increased, the amount of absorbed water and swelling decreased and the ASE increased. The decrease in the amount of absorbed water is thought to be affected by the chemical change in the cell wall by heat-treatment. On the contrary, the decrease in the swelling and the increase in the ASE are thought to be due to a combination of chemical changes and physical changes such as structural changes in the cell wall.

• Korean Journal of Clinical Pharmacy
• /
• v.14 no.2
• /
• pp.71-77
• /
• 2004

The author has tested the clinical efficacy and safety of an anti-inflammatory drug in patients with inflammation of the otnrhinolaryngology. Deoxyribonuclease prepared from bovine pancreas destroyed fibers and reduced the viscosity of the exudates. Bromelain is a group of proteolytic enzymes which are known to have an effect on inflammation, swelling, and pain in inflammatory disorders. The mucolytic and anti-inflammatory properties of deoxyribonuclease associated with bromelain in inflammation of otorhinolaryngology were assessed in 67 patients. A standard dose of 3 tablets of deoxyribonuclease bromelain tablet was given for not less than 7 days. In all tile groups of patients considered, the drug showed a considerable therapeutic effectiveness. At the end of 7-28 days treatment, more than $89.6\%$ of treatment was improved. These findings suggest that it could be permitted to use deoxyribonuclease-bromelain tablet in patients with inflammation of the otorhinolaryngology.

• YAKHAK HOEJI
• /
• v.56 no.1
• /
• pp.20-25
• /
• 2012

In Northeast Asia, Paeoniae Radix has been used in treatments of inflammation-causing diseases such as arthritis for many centuries. Paeoniflorin, one of the principle bioactive monoterpene glucosides from the paeony root, is reported to be mostly responsible for the effectiveness of the treatments. However, the anti-inflammatory effect of a monoterpene, paeoniflorigenone (PFG) which partially has the moiety of paeoniflorin minus a glucose structure is unknown. Thus, the aim of this work was to investigate anti-inflammatory activity of PFG. For the investigation, PFG activity on the NO (nitric oxide) production from LPS-stimulated macrophages, and the anti-inflammatory effect was tested in the animal model of septic arthritis caused by Candida albicans, a major etiological agent for septic arthritis. For induction of the arthritis, mice were administered with an emulsion of C. albicans cell wall (CACW) mixed with Complete Freund's Adjuvant (CFA) via footpad-injection (Day 0); PFG at a dose of 0.5 or 1 mg/mouse (25 or 50 mg/kg of body-weight) was given to the animals on Day 3, 6, and 9; footpads were scored for arthritis. Moreover, the PFG effect on proliferation of T-lymphocyte that causes aggravation of arthritis was additionally tested. Data resulting from those tests showed that PFG inhibited the NO production from the stimulated macrophage in a dose dependent manner (P<0.05), indicating that PFG is an anti-inflammatory. To confirm the in-vitro results, anti-inflammatory activity of PFG was determined against C. albicans-caused septic arthritis. Data showed that PFG-treatment reduced footpad-swelling which indicates that PFG has anti-arthritic effect (P<0.05), which is therapeutic. The anti-arthritic effect appeared to be mediated by PFG suppression of T-cell proliferation. Ultimately, PFG, a monoterpene component, has anti-inflammatory activity analogous to paeoniflorin. The anti-inflammatory activity treats the septic arthritis due to a pathogenic fungus C. albicans.

• Journal of the Korean Wood Science and Technology
• /
• v.15 no.3
• /
• pp.44-55
• /
• 1987

In order to study the effect of sawdustboard combined with plastic chips, 0.5mm($T_1$), 1mm($T_2$), 1.4mm($T_3$) thick nylon fiber. polypropylene rope fiber(RP), and 0.23mm thick moth-proof polypropylene net fiber(NP) were cut into 0.5, 1, 2cm long plastic chips. Thereafter, sawdustboard combined with plastic chips prepared as the above and plastic non-combined sawdustboard(control) were manufactured into 3 types of one-, two-, and three layer with 5 or 10% combination level. By the discussions and results at this study, the significant conclusions of mechanical and physical properties were summarized as follows: 1. The MORs were shown in the order of 3 layer> 2 layer> 1 layer among plastic non-combined boards, and $T_3$ < $T_2$ < $T_1$ < RP (NP(5%) < NP(l0%) among plastic combined boards. In 2cm long plastic chip in 1 layer board, the highest strength through all the composition was recognized. 1 layer board showing the lower strength with 0.5cm plastic chip rendered to the bending strength improvement by 2 or 3 layer board composition. On the other hand, 2 or 3 layer combined with 1, 2cm long polypropylene net fiber chips incurred MOR's conspicuous decrease requiring optimum plastic chip combined level and consideration to combined type. 2. MOE in plastic non-combined 3 layer board exhibited sandwich construction effect by higher resin content application to surface layer in the order of 3layer>1layer>2layer with the highest stiffness of the board combined with polypropylene chip, while nylon chip-combined board had little difference from plastic non-combined board. In relevant to length and layer effect, 3 layer board combined with the 0.5cm long polypropylene net fiber chip in 5% and 10% combined level presented 34-43% and 44-76% stiffness increase against plastic non-combined board(control), respectively. Moreover, in 1 layer board, 30% stiffness increase with 10% against 5% combined level in the 1 and 2cm long polypropylene net fiber chip was obtained. 3. Stress at proportional limit(Spl) showing the fiber relationship (r: 0.81-0.97) between MOR presented in the order of 1 layer<2 layer<3 layer in plastic non-combined board. Correspondingly, combined effect by layer and plastic chip length was similar to MOR's. 4. Differently from previous properties(MOR, MOE, Spl). work to maximum load(Wml) of 2 layer board approached to that of 3 layer board. Conforming the above phenomenon. 2 layer combined with 0.5cm long polypropylene net fiber chip kept the greater work than 1 layer. The polypropylene combined board superior to nylon -and plastic non - combined board seemed to have greater anti - failing capacity. 5. Internal bond strength(IB), in contrast to MOR's tendency. showed in the order of T1

• The Journal of Korean Medicine Ophthalmology and Otolaryngology and Dermatology
• /
• v.18 no.2
• /
• pp.10-27
• /
• 2005

Objectives: To study the effectiveness of Sanpunggosamhwan(SGH) against Allergic Contact Dermatitis(ACD), the contact hypersensitivity assay, change of cutaneous shape, anti-allergic effect, anti-inflammatory effect, and the effect on skin barrier were observed. Methods: The 200g rats were divided into three groups of 15 rats. The first group is the Normal group which was applied Acetone olive oil only. The second group is the ACD group which has intentionally activated Allergic Contact Dermatitis by DNCB. The third group is the SGH group which was given medication of Sanpunggosamhwan extract after the induction of Allergic Contact Dermatitis by DNCB. Each group of rats was observed after 24, 48 and 72 hours. Results: I. With the result of contact hypersensitivity assay, at 24hours SGH group showed appreciably less ear swelling than ACD group. 2. Regarding general change of skin, SGH group showed less hyperplasia of epidermis, less damage of epidermis than ACD group. 3. Regarding the number of WBC, ACD group showed significantly less than normal and SGH group at 72 hours. 4. Regarding the number of RBC in blood, ACD and SGH group showed significantly more RBC than normal group at 24, 48, 72 hours. 5. Regarding the ratio of neutrophil in WBC, ACD and SGH group showed significantly high percentage than normal group at 24, 48 hours. 6. Regarding the ratio of lymphocyte in WBC, ACD and SGH group showed significantly high percentage than normal group at 48 hours. 7. Regarding the erythema, SGH group showed significantly more erythema than normal and ACD group at 48 hours. 8. Regarding the melanin, SGH group showed significantly less melanin than normal group at 24 hours.9. Regarding the skin hydration, SGH group showed significantly high value than and ACD group at 72 hours. 10. Regarding the skin pH, ACD group showed significantly high value than normal and SGH group af 24 hours. 11. Regarding the number of Total IgE, ACD and SGH group showed more Total IgE than normal. g개up at 24 hours. 12. At Electro microscope-morphologic changes of skin, the damage of epithelium was decreased and regeneration power of skin was increased in the SGH group. Conclusions: The Sanpunggosamhwan extract administration was effective on the mitigation of skin damage in rats with allergic contact dermatitis.

• Economic and Environmental Geology
• /
• v.56 no.6
• /
• pp.697-714
• /
• 2023

The Tracksite of Cretaceous Dinosaurs and Pterosaurs in Jeongchon, Jinju was discovered in late 2017 during the construction of the Ppuri industry complex. This site is a natural heritage site with a high paleontological value, as it preserves fossils of various types of dinosaurs, pterosaurs, and animal traces at a dense concentration. In this study, we surveyed that physical weathering such as joint, crack, scaling, exfoliation, and fragmentation occurred through field research in the fossil site, and conducted basic research on conservation science to reduce the damage. To this end, among the eight levels identified after excavation, the rocks of Level 3, which yielded a large number of theropod footprint fossils, and Level 4, which yielded pterosaur footprint fossils, were analyzed for material characteristics and evaluation of the effectiveness of consolidation and adhesion. This results showed that the rocks in the Level 3 stratum were dark gray siltstone and the rocks in the Level 4 stratum were dark gray shale, which contained a large amount of calcite and were composed of quartz, plagioclase, mica, alkali feldspar, and other clay minerals, which are likely to be damaged by rainfall under external conditions. As a result of conducting an artificial weathering experiment by dividing the probationary sample into four groups: untreated, consolidation treatment, anti-swelling treatment, and adhesive treatment, the consolidation and the swelling inhibitor showed an effect immediately after treatment, but did not show a blocking effect under a freezing-thawing environment. The adhesive showed that the adhesive effect was maintained even under freezing-thawing conditions. In order to preserve the fossil sites at Jeongchon in the future, in addition to temporary measures to block the inflow of moisture, practical measures such as the construction of protective facilities should be prepared.