• 대한치과교정학회지
• /
• 제23권1호
• /
• pp.57-74
• /
• 1993

Anterior crossbite is a common malocclusion in the early deciduous dentition. Even today, many these malocclusion patients are not treated until the mixed or permanent dentition. And the purpose here is to emphasize the need for early diagnosis and possible treatment for these anterior crossbite malocclusions and their associated facial patterns. Case histories of 4 patients selected from the author's practice are presented. Different methods of treatment are evaluated. Some improvement was achieved in all patients from an early interceptive regimen, although ultimately corrective orthodontic treatment may still be needed in some. It is concluded that early interception of deciduous anterior crossbite malocclusion should by attempted in patients ; there should be no delemma in reaching such a decision. And it is essential for diagnosis and treatment to determine exact variations in growth when some appliance are used, it is recommended that growth-related records be made as early as possible.

• 대한치과교정학회지
• /
• 제47권1호
• /
• pp.21-30
• /
• 2017

Objective: The aim of this study was to investigate the three-dimensional (3D) position of the center of resistance of 4 mandibular anterior teeth, 6 mandibular anterior teeth, and the complete mandibular dentition by using 3D finite-element analysis. Methods: Finite-element models included the complete mandibular dentition, periodontal ligament, and alveolar bone. The crowns of teeth in each group were fixed with buccal and lingual arch wires and lingual splint wires to minimize individual tooth movement and to evenly disperse the forces onto the teeth. Each group of teeth was subdivided into 0.5-mm intervals horizontally and vertically, and a force of 200 g was applied on each group. The center of resistance was defined as the point where the applied force induced parallel movement. Results: The center of resistance of the 4 mandibular anterior teeth group was 13.0 mm apical and 6.0 mm posterior, that of the 6 mandibular anterior teeth group was 13.5 mm apical and 8.5 mm posterior, and that of the complete mandibular dentition group was 13.5 mm apical and 25.0 mm posterior to the incisal edge of the mandibular central incisors. Conclusions: Finite-element analysis was useful in determining the 3D position of the center of resistance of the 4 mandibular anterior teeth group, 6 mandibular anterior teeth group, and complete mandibular dentition group.

• Journal of Periodontal and Implant Science
• /
• 제23권2호
• /
• pp.331-344
• /
• 1993

The purpose of this study was to investigate the change of tooth mobility and bite force according to periodontal disease severity. Tooth mobility and biting force due to change of viscoelastic property of periodontium were influenced by inflammation of periodontal tissue. 30 patients participated in this study, the periodontal disease severity is evaluated with SBI and attachment loss. SBI and attachment loss were examined by periodontal probe. Tooth mobility was tested two times to each tooth using periotest (Siemens Co, Germany) and bite force was evaluated with MPM-3000 (Nihon Kohden Co, Japan). Statistical analysis was applied to correlation ($r^2$) and regression analysis. The obtained results were as follows : 1. As the attachment loss increased, tooth mobility increased with significance, and they had highly positive correlation ($r^2=0.68$) on entire dentition. 2. As the SBI increased, tooth mobility increased with significance, and they had positive correlation ($r^2=0.37$) on entire dentition. 3. As the attachment loss increased, bite force decreased with significance, and they had highly negative correlation ($r^2=0.42$) on maxillary anterior dentition but low negative correlation ($r^2=0.20$) on the other portion of dentition. 4. As the SBI increased, bite force decreased with significance, and they had highly negative correlation ($r^2=0.31$) on maxillary anterior dentition but low negative correlation ($r^2=0.16$) on the other portion of dentition. 5. As tooth mobility increased, bite force decreased with significance, and they had highly negative correlation ($r^2=0.32$) on maxillary anterior dentition but low negative correlation ($r^2=0.16$) on the other portion of dentition.

• Imaging Science in Dentistry
• /
• 제48권4호
• /
• pp.261-268
• /
• 2018

Purpose: To determine the impact of an image processing technique on diagnostic accuracy of digital panoramic radiographs for the assessment of anatomical structures in paediatric patients with mixed dentition. Materials and Methods: The study consisted of 50 digital panoramic radiographs of children aged from 6 to 12 years, which were later on processed using a dedicated image processing method. A modified clinical image quality evaluation chart was used to evaluate the diagnostic accuracy of anatomical structures in maxillary and mandibular anterior and maxillary premolar region of processed images. Results: A statistically significant difference was observed between pre and post-processed evaluation of anatomical structures(P<0.05) in the maxillary and mandibular anterior region. The anterior region was found to be more accurate in post-processed images. No significant difference was observed in the maxillary premolar region (P>0.05). The Inter-observer and intra-observer reliability of both pre and post processed images were excellent (>0.82) for anterior region and good (>0.63) for premolar region. Conclusion: The application of image processing technique in digital panoramic radiography can be considered a reliable method for improving the quality of anatomical structures in paediatric patients with mixed dentition.

• 구강회복응용과학지
• /
• 제33권4호
• /
• pp.278-283
• /
• 2017

목적: 본 연구 목적은 이상적인 임플란트 근원심적 식립 위치 결정에 필요한 정보를 제공하기 위해서 콘빔형 전산화단층영상(cone-beam CT)을 사용하여 건강한 자연치열에서 백악-법랑 경계부와 치조골 흡수를 가정한 그 하방 2 mm에서 전치, 소구치, 대구치의 치간거리를 평가하는 것이다. 연구 재료 및 방법: 원광대학교 치과대학병원에서 cone-beam CT를 촬영한 건강한 치열의 200명 환자를 선정하였다. Cone-beam CT 이미지를 DICOM (digital imaging and communication in medicine) 파일로 전환하여, 3차원 영상으로 재구성하였고, cone-beam CT 이미지를 표준화하기 위하여 head reorientation을 시행한 후, 전용 소프트웨어를 이용해 재구성된 파노라마 이미지를 얻었다. 모든 계측은 3명의 치과의사에 의해 최적화된 파노라마 이미지 상에서 시행되었다. 결과: 백악-법랑 경계부에서 상악 평균 치간거리는 전치 1.84 mm, 소구치 2.07 mm, 대구치 2.08 mm 그리고 하악은 전치 1.55 mm, 소구치 2.20 mm, 대구치 2.36 mm였다. 백악-법랑 경계부 하방 2 mm에서 상악 평균 치간거리는 전치 2.19 mm, 소구치 2.51 mm, 대구치 2.60 mm 그리고 하악은 전치 1.86 mm, 소구치 2.53 mm, 대구치 3.01 mm였다. 결론: 자연치열에서 치간거리는 전치부보다는 구치부에서 더 컸으며, 백악-법랑 경계부보다 그 하방 2 mm에서 더 크게 나타났다. 전 치열에서 가장 좁은 곳은 하악 전치, 가장 넓은 곳은 하악 대구치였다.

• 대한치과교정학회지
• /
• 제39권2호
• /
• pp.83-94
• /
• 2009

최근 골내 고정 형태의 temporary anchorage device (TAD)를 많이 이용하게 되면서 다양한 위치로부터 그리고 강한 교정력을 이용할 수 있게 되었다. 이에 따라 치아군의 이동양상을 예측하고 치료계획을 세우기 위하여 다양한 치아군의 저항중심의 위치에 대한 이해가 필요하게 되었다. 본 연구에서는 3차원 유한요소해석을 이용하여 상악 4전치, 6전치 그리고 상악 전 치열에서 3차원적 저항중심의 위치를 조사하고자 하였다. 이를 위하여 상악 전치열 14개 치아와 치근막 및 치조골의 3차원 유한요소모델을 제작하였고, 각 치아군별로 치관부를 협측, 설측 호선, 설측 splint wire로 고정하여 개별 치아이동을 최소화하고 적용된 힘이 치아에 고루 분산되도록 하였다. 상악 중절치 절단연의 중점에서 연장된 와이어 빔에 수직, 수평으로 100 g 또는 200 g의 힘을 가하여 치아의 변위를 해석하고, 각 치아군에 속한 치아들이 최대한 평행이동 되는 힘의 적용부위를 저항중심으로 정의하였다. 연구결과 상악 4전치군의 저항중심은 상악 중절치 절단연으로부터 치근방향 13.5 mm, 후방 12.0 mm, 상악 6전치군은 상악 중절치 절단연으로부터 치근방향 13.5 mm, 후방 14.0 mm에 위치하였으며 상악 전치열군의 저항중심은 상악 중절치 절단연으로부터 치근방향 11.0 mm, 후방 26.5 mm에 위치하였다. 본 유한요소 실험모델을 이용하여 얻은 결과는 교정치료의 효율성을 높일 수 있으리라 생각된다.

• Journal of Oral Medicine and Pain
• /
• 제9권1호
• /
• pp.157-167
• /
• 1984

A human bite-mark shows special feature according to the suspect's dentition. The teeth which most frequently give useful bite-marks are six upper and lower anteriors, while the premolar teeth somtimes give marks it is often difficult to distinguish. The author tried to classify and to analize the anterior dentition which makes the bite-mark directly by means of 672 maxillary and 691 mandibular stone model taken from Korean adult aging from 17 to 40 years old. The results were as follows : 1. There was no particular correlation between the presence of six normal-shaped and correctly positioned upper and lower anteriors and the presence of rotation of teeth. 2. Inter central incisor, inter lateral incisor, inter canine width and angles of adjecent teeth were not identical eath other in studied models. 3. The results of this analysis supported the statement that any bite-mark had no same feature.

• 대한치과교정학회지
• /
• 제9권1호
• /
• pp.67-84
• /
• 1979

The author measured the right and left craniofacial skeleton using posteroanterior cephalography of 124 male and 97 female subjects of ages ranging 2-6 years, 7-13 years and adult group on Korean. Statstical parameters were calculated by computer from the data. The results of the study were as follows. 1. In the male and female group of deciduous dentition, the right side measurements were slightly greater than the left side measurements, and generally male measurements were greater than female measurements. 2. In the both sex group of mixed dentition, the right side measurements were greater than the left side measurements, and in comparision of sex, the female recognized more growth, and development than male, especially on the cranial base, lateral maxilla, lower maxilla and dental region. 3. In the permanent dentition group, regardless of sex, the right side measurements were greater than the left side measurements, and in the sex difference, male was conspicuously greater than female on both sides measurements. 4. In the permanent dentition group, the asymmetry of the face was striking than deciduous dentition and mixed dentition group.

• 대한심미치과학회지
• /
• 제8권1호
• /
• pp.18-27
• /
• 1999

A tooth solely can not be an exclusive factor to attain our goal, esthetics. Other consideration, such a proportion of individual tooth, harmonized arrangement of the dentition and surrounding tissues including gingiva, lip and face should be taken into account. Esthetic gingival pattern and incisal level in the anterior area are the very important factors for esthetic restoration of the smile. We often propose adequate periodontal and prosthodontic approaches in order to improve the esthetics of the anterior area. Here, I would like to share some cases which include soft tissue management for ovate pontic placement, osteoplasty, resin filling for severe cervical caries, and bleaching approach to discolored root caused by endodontic treatment, and so on.

• 대한치과교정학회지
• /
• 제43권3호
• /
• pp.147-158
• /
• 2013

This article describes the orthodontic treatment of a 31-year-old Korean female patient with gummy smile and crowding. The patient showed excessive gingival display in both the anterior and posterior areas and a large difference in gingival heights between the anterior and posterior teeth in the maxilla. To correct the gummy smile, we elected to intrude the entire maxillary dentition instead of focusing only on the maxillary anterior teeth. Alignment and leveling were performed, and a midpalatal absolute anchorage system as well as a modified lingual arch was designed to achieve posterosuperior movement of the entire upper dentition. The active treatment period was 18 months. The gummy smile and crowding were corrected, and the results were stable at 21 months post-treatment.