• Journal of Energy Engineering
• /
• v.11 no.4
• /
• pp.283-290
• /
• 2002

Numerical calculations have been carried out for the mixed convection flow in a concentric curved annulus with constant heat flux boundary condition at inner wall. The flow is assumed to be fully developed so as to maintain a constant streamwise pressure and temperature gradient. Computations have been performed for flows of radius ratio 0.2 and 0.5 with the Dean number lying in the range 0$K^{1/2}$ for the wide range of the Dean number considered here.

• Ocean and Polar Research
• /
• v.39 no.4
• /
• pp.279-292
• /
• 2017

We determined the maturity and growth of the Marbled sole, Pseudopleuronectes yokohamae based on monthly sampling in the West Sea of Korea from February 2009 to December 2010. Determination of sex of P. yokohamae was by gonadal inspection, and age and growth were determined by analyzing the otolith. The biological minimum size of P. yokohamae female was 24.5 cm. The seasonal changes in the ratio of a translucent zone to an opaque zone revealed that the end of the translucent zone of the otolith were annuli formed in May once a year. We compared 8 type growth equations with several length-at-age data. By using the length-at-monthly age data of these, the calculated von Bertalanffy growth equations were $L_t=41.7(1-e^{-0.47(t+0.24)})$ for females and $L_t=32.7(1-e^{-0.75(t+0.01)})$ for males. We estimated that 24.5 cm was the total length of 2 year old P. yokohamae spawns in the cold water season from January to April, and grows to 8 years old for females and 6 years old for males in the West Sea of Korea.

• Geomechanics and Engineering
• /
• v.16 no.1
• /
• pp.59-69
• /
• 2018

This study focused on the mechanical and hydraulic characteristics of underwater tunnels based on Mohr-Coulomb (M-C), Hoek-Brown (H-B) and generalized H-B failure criteria. An improved approach for calculating stress, displacement and plastic radius of the circular tunnel considering hydraulic-mechanical coupling was developed. The innovation of this study was that the radius-incremental-approach was reconstructed (i.e., the whole plastic zone is divided into a finite number of concentric annuli by radius), stress and displacement of each annulus were determined in terms of numerical method and Terzaghi's effective stress principle. The validation of the proposed approach was conducted by comparing with the results in Brown and Bray (1982) and Park and Kim (2006). In addition, the Rp-pin curve (plastic radius-internal supporting pressure curve) was obtained using the numerical iterative method, and the plastic radius of the deep-buried tunnel could be obtained by interpolation method in terms of the known value of internal supporting pressure pin. Combining with the theories in Carranza and Fairhurst (2000), the improved technique for assessing the reliability of the tunnel support was proposed.

• Korean Journal of Optics and Photonics
• /
• v.12 no.3
• /
• pp.165-171
• /
• 2001

We discuss the influence of annular binary filters on the axial PSF of imaging systems which are apodized by a radiallysymmetric filter and have spherical aberration and coma. In this paper we consider a whole family of annular binary fIlters in two cases. First, the binary filters are composed of two transparent annuli of the same area. Second, the binary filters are composed of a central clear circle and a concentric annular aperture with area bigger than that of the inner circle. In order to investigate the influence of the proposed filters on the axial PSF, we may use the axial resolution gains, which evaluate in terms of the FWHM of the intensity in the focal region of an apodized imaging system in comparison with that corresponding to a nonapodized one. We evaluate the PSF for the conventional and confocal systems having an aberration. ation.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.37 no.1
• /
• pp.51-56
• /
• 2004

Age and growth of three-lined tonguefish (Cynoglossus abbreviatus) were studied using samples from the waters off Yosu, Korea, from June to December, 2001. Sagittal otoliths had relatively clear annuli. Each annulus was formed once a year in April. The peak of the gonadosomatic index occurred also in April. The oldest fish observed in this study was 5 years old for females and 4 years old for males. The relationship between the otolith radius (R) and total length (L) was as follows: L=14.921R-2.5318 for females and L=13.527R-0.5584 for males. The relationship between total length and body weight (W) was as follows: $W=0.0008L^{3.54}$ for females and $W=0.0029L^{3.14}$ for males. The growth in length of the fish was expressed by the von Bertalanffy's growth equation as: $$L_t=44.54(1-e^{-0.16(t+2.69)})\;for\;females\;and\;L_t=41.52(1-e^{-0.15(t+3.34)})\;for\;males$$.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.20 no.10
• /
• pp.3313-3321
• /
• 1996

A fundamental study in cooling and solidification process focused on ice storage was performed, including the interesting phenomena of density inversion, supercooling and dendritic ice. A numerical study was performed for natural convection and ice formation in the cooling and freezing processes with supercooling in a space between double cylinders. When water was cooled under the freezing point by a cooling wall in a cavity, solidification was not started at once, but a subcooled region was formed near the wall. Especially, when the cooling rate was low, subcooled region extended to a wide area. However, after a few minutes, supercooling is released by some triggers. Dendritic ice is suddenly formed within a subcooled region, and a dense ice layer begins to be developed from the cooling wall. Due to the difficulties, most previous studies on solidification process with numerical methods had not treated the supercooling phenomena, i.e. the case considering only the growth of dense ice. In this study, natural convection and ice formation considering existence of supercooling and dendritic ice were analyzed numerically with using finite difference method and boundary fixing method. The results of numerical analysis were well compared with the experimental results.

• Proceedings of the KSME Conference
• /
• 2000.04b
• /
• pp.373-378
• /
• 2000

An experimental investigation on the incipience of nucleate boiling in forced flow of water is performed as a verification and extension of previous analysis. The effects of the subcooling, Reynolds number and surface curvature on the onset of nucleate boiling(ONB) in a concentric annulus flow channel with smooth inner heating surface is investigated experimentaly. Through flow visualization, the boiling phenomenon was observed directly and the experimental results were examined to find ONB heat flux. The results show that the variation of heat flux at ONB is increased linearly as the Reynolds number and subcooling are increased. The effect of surface curvature is very great specially for a small radius when radius of the inner heating tube is increased, the heat flux at ONB is almost inversely increased for the range of this investigation. It is found that the effect of convex surface curvature on ONB heat flux is very significant for a small radius.

• Journal of Chest Surgery
• /
• v.26 no.12
• /
• pp.909-914
• /
• 1993

Complete and optimal visualization of the mitral apparatus is a prerequisite for accurate repair or replacement of the mitral valve. A vertical left atriotomy just posterior to the interatrial groove is the most commonly used approach. However,exposure can be difficult under certain circumstances,such as small left atrium or reoperation. Other approaches have been advocated to deal with this difficult situations. We used an extended transseptal approach in 10 patients and good clinical results and excellent educational effects were obtained. The extended transseptal approach combines two semicircular atrial incisions circumscribing the tricuspid and mitral annuli anteriorly and superiorly,allowing exposure of the mitral valve by deflecting the ventricular side using stay sutures. The right atrium is opened anteriorly along the atrioventricular sulcus. The atrial septum is incised vertically through the fossa ovalis. Right atrial and septal incisions are joined at the superior end of the interatrial septum and extended across the dome of the left atrium to the left atrial appendage. The mitral valve was replaced in all 10 patients. Four of 10 patients had other simultaneous valve procedure: one had aortic valve replacement: 2 underwent tricuspid annuloplasty: 1 had aortic valve replacement and tricuspid annuloplasty. There was no hospital death and complication. Among the 5 patients who had atrial fibrillation preoperatively,4 had atrial fibrillation postoperatively,1 converted to sinus rhythm. The five patients who were in normal sinus rhythm preoperatively remained in sinus rhythm after replacement. A review of our results with this approach confirms the efficacy and safty of this method. So we recommanded this approach for routine mitral valve procedure,especially difficult situations,such as a small left atrium or the redo operation.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.10 no.6
• /
• pp.866-878
• /
• 1999

In this paper, stripline circulator including a ferrite resonator which is consisted of a circular disk and two annuli disks is designed and fabricated. Using RGF(Recursive Green Function) technique, electromagnetic field of port and input impedance is presented. The circulator characteristics are compared according to the ferrite arrangement, bias field intensity and port width. The pass-band frequency of the fabricated circulator using the designed data is from 1.55 GHz to 2.95 GHz, the reflection coefficient $S_{11}$ of input port is -30 dB, and the transmission coefficient $S_{21}$ between input port and isolation port is -28 dB at resonating point 2.38 GHz.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.35 no.6
• /
• pp.557-562
• /
• 2002

This study was to estimate population growth parameters of the freshwater bivalve, Corbicula (Corbiculina) papyacca (Heude) in Korea. Samples were collected from Jojong stream in Chungpyeong from September 1999 to August 2000. Ages were determined from the ring of shell, The shell length of the samples ranged from 4,2 mm to 28.1 mm, The ring on the surface of shell was formed once a year from January to March, Marginal increment analysis of shell rings indicated that annuli were formed in June. Spawning period was estimated to be May to August with a peak between June and July through fatness analysis, and thus rings were considered to be true annual marks. Von Bertalanffy's growth parameter were estimated from a nonlinear method with the value of logical maximum shell length ($L_{propto}$) was 34,36 mm, K was 0.1531/year, logical age of shell length 0 ($t_{0}$) was -0,5246 year, and logical maximum total weight ($W_{propto}$) was 11.42 g.