• Journal of Ecology and Environment
• /
• v.32 no.2
• /
• pp.109-113
• /
• 2009

Tree-ring width analysis has been used to assess the effects of air pollution on tree growth around industrial complexes. Our study was conducted to elucidate the effect of air pollutants on annual ring growth in black pines (Pinus thunbergii) of age 41$\sim$48 years around Ulsan Metropolitan City. The growth data were analyzed by multiple regression and the results are as follows: 1. The annual ring increment of black pines increased with tree age until age 40 years and then decreased gradually after age 40 years. 2. The increment of annual ring width of black pines was affected more by precipitation and evapotranspiration than air temperature. An annual ring decline appeared in the years 1968$\sim$1983, when annual ring indices below zero were observed. Decreased annual ring growth during this period may have been due to air pollution. 3. The heavy metal with the strongest effect on annual ring growth of black pines in the experimental stand was lead (Pb). The concentration of lead in the stand was estimated as over 6 ppm. 4. The technique of tree-ring width analysis may be useful for estimation of the extent of pollution in forest areas near industrial complexes.

• Journal of Korean Society of Forest Science
• /
• v.24 no.1
• /
• pp.25-44
• /
• 1974

In the present paper I described the results of the observations made on the visual characteristics such as the annual ring width and summerwood percentage of Pinus koraiensis Sieb. et Zucc. grown at out university forest. The results of the study are as follows: Characteristics of annual ring width and summerwood percentage 1. The range of dispersion of annual ring width and summerwood percentage are respectively 0.5-6.5mm and 5-50% on the normal wood and its arithmetic mean values are each 3.0mm and 24% on all sample trees. 2. The values of annual ring width of heart wood are larger than that of sapwood but on the contrary the values of summerwood percentage of heartwood are smaller than that of sapwood. On the other hand variations of these values are distingushed on the heartwood. 3. The values of annual ring width due to the parts of stem with crown. with clear length and at bottom showed that the largest values are given at the parts of stem with crown. But on the contrary the summerwood percentage values are largest at the parts of stem at bottom on all sample trees. 4. The values of annual ring width and summerwood percentage depending on the stand sides are not obvious. Horizontal and vertical variations of annual ring width and summerwood percentage 5. It was recognized that horizontal (radial direction) variations of annual ring width and summerwood percentage indicated two different patterns (the region of large fluctuation and that of small fluctuation) in a tree stem. These boundaries are seemed to appear at the parts of 12-15 annual rings from pith. 6. According to the increase of height in tree the values of annual ring width increase but the values of summerwood percentage gradually decrease. 7. But vertical variations of annual ring width and summerwood percentage on the sapwood are divided into two different parts (region of increased or decreased upwards and that of remained constant in successive height) in a tree stem and these limits are seemed to appear at the 7m of height in trees. Relations between annual ring width and summerwood percentage 8. The modes of summerwood percentage related with annual ring width are seemed to appear almost in the definite range (10-25%). 9. The relations between annual ring width and summerwood percentage show a highly negatine correlation on all sample trees.

• Journal of Environmental Science International
• /
• v.19 no.3
• /
• pp.305-312
• /
• 2010

The purpose of this study is to compare the relative growth of annual ring width of red pine(Pinus densiflora), black pine(Pinus thunbergii) and pitch pine(Pinus rigida) by means of multiple regression method according to Graybill hypothesis. The obtained results are as follows. 1. The changes of rainfall have affected to tree growth during the periods of 1975 through 1978. 2. Among these pine trees, red pine was mostly influenced by environmental factors. 3. The growth of annual ring width was sensitively responded to the changes of rainfall and air temperature. 4. Among the heavy metals analyzed, the concentrations(ppm) of Lead(Pb) and Copper(Cu) were negatively effected on the growth of annual ring width of pine trees. 5. The analytical technique of annual ring width may be useful for estimation of the pollution in forest areas near industrial complexes.

• Journal of the Korea Furniture Society
• /
• v.10 no.1
• /
• pp.57-63
• /
• 1999

This study was carried out to analyze the relationship between basic physical properties and acoustical characteristics of imported violin wood and to offer the information on raw material procurement and incoming-material quality control to domestic violin makers which have purchased most raw materials from European exporting countries at high expense. Equilibrium moisture content of European spruce with lower specific gravity after the prolonged storage was rather higher than that of European maple with higher specific gravity. The specific gravity of spruce increased with decreasing annual ring width, however, that of narrower annual ring. Increasement in specific gravity enhanced the dynamic Young's modulus of both wood species, but influenced the vibration energy loss by internal friction differently between two species. For dynamic MOE, qurater-sawn spruce was higher than the flat-sawn, but maple showed the reverse directional characteristics. Consequently, it would be well for violin makers to establish the standard for materials and quality control system to assure the quality of their violin products.

• Journal of the Korea Furniture Society
• /
• v.17 no.4
• /
• pp.109-114
• /
• 2006

An investigation was carried out for the annual ring width, longitudinal tracheid diameter and wall thickness in different tree heights for Pinus koraiensis Sieb. et. Zucc. The annual ring width increased along with the tree height, however the tracheid diameter and wall thickness decreased with the tree height. Tracheid wall thickness was found the thickest at 2.0m from the above ground samples and it increased gradually from pith to bark. Radial tracheid diameter was found to be larger than that of tangential tracheid diameter in earlywood. But, it was found to be the opposite in latewood. In earlywood, the average values of tracheid wall thickness was found the range of $2.1-3.0{\mu}m$, whereas, in latewood, it was $2.4-4.2{\mu}m$.

• Journal of the Korea Furniture Society
• /
• v.16 no.1
• /
• pp.17-23
• /
• 2005

European maple is famous for the optimum solid wood for making bridge which is the most important part in violin acoustics. This study was carried out to investigate the variation of main features, i. e. annual ring width and cutting direction of costly imported violin bridge blanks and to examine the effect of these features of the blanks on the vibrational characteristics of bridge blanks. Imported violin bridge blanks had somewhat large variation in major macroscopical and physical properties and there was little relationship between annual ring density and weight of maple blanks. Resonant frequency of violin bridge blanks had some positive correlation with weight, however, damping having negative relationship with frequency was seldom affected by any physical properties of the maple blanks. Deviation from the radial cutting of tail side(ray direction from top toward feet on the edge of bridge blank) lowered the resonant frequency. Consequently, weight and ray direction should be taken for the critical quality decisive factors(QDF) of incoming bridge blanks by not only inspectors also luthiers who tune the bridge by shaping and are responsible for the final timbre quality of this complicate instrument.

• Journal of the Korean Wood Science and Technology
• /
• v.23 no.3
• /
• pp.58-65
• /
• 1995

The possibilities of the estimation of the moisture content(MC) for sitka-spruce (Picea sitchensis Carr.) by measuring density have been investigated. The method is based on the relationships between the wood density and moisture content of wood expressed by Equations (8)~(9). The purpose of this study is examining the estimation of the moisture content of wood by density and the variation of moisture content with annual ring width of wood. The following conclusions were obtained; 1. This method is very convenience because of the average moisture content of wood can be obtained by a simple estimation. This estimation can be made from the easy measurement of the weight and volume of wood. 2. Coefficient of determination between the experimental MCs and theoretical MCs which is calculated by the oven-dry densities of each specimens and Equations (8), (9) is 0.98. This Correlation is very remarkable. Therefore the model Equations on the estimation of moisture content by wood density was available. 3. Relationship between experimental MCs and theoretical MCs which is estimated by average oven-dry density of total specimens showed positive correlation(Fig.2). But from the Fig.4. we can concluded that the number of specimens is two groups. This phenomenon is considered that the variation of MC by the annual ring width from the specimens' observations. Consequently, the MCs of wood by density, is likely to be successful method. can be estimate using by the average oven-dry densities divided with the annual ring widths of wood.

• Journal of Korean Society of Forest Science
• /
• v.80 no.4
• /
• pp.351-359
• /
• 1991

Annual ring characteristics of pinus thunbergii grown in several air-polluted areas were investigated by soft X-ray densitometry. Ring width, maximum density and relative difference between maximum and minimum density(abbreviated to DD) were generally decreased after the beginning of operation of the factories at the vicinity of the pollution sources. Especially at the nearest areas of the industrial complex, those were distinctly decreased, and the changes, either increases or decreases, in percentage of latewood and minimum density could not be explained by the air pollution dosages. Ring width, maximum density and DD were being more apparently decreased after 5 years than those for 5 years after the beginning of operation, and also the rate of decrease was increased from after 5 years after the beginning of operation, and the rate of decrease of ring width was the highest of all. It was inferred that ring width, maximum density and DD of Pinus thunbergii could be used as indicators to detect the growth damage by air pollution.

• Journal of the Korea Furniture Society
• /
• v.10 no.2
• /
• pp.55-61
• /
• 1999

This research was carried out to investigate the fundamental properties such as the structure of annual ring, density distribution, compressive strength with parallel to grain, relative crystallinity, and microfibril angle of Gumgangsong(Pinus densoflora for. erecta Uyeki). The wood specimens, Gumgangsong and Sonamu(Pinus densiflora S. et Z.), for this experiment were prepared at Ulijingoon Sokwangri and Kyungpook university's forest in Kyungpook province, respectively. Average annual ring width is $2.0mm{\pm}0.3$ in heartwood of Gumgangsong. The respectively of heart wood was over 60 percent in Gumgangsong and 20~50 percent in Sonamu. Heartwood density were ranged from 0.5 to $0.8{\;}g/cm^3$ in Gumgangsong and from 0.4 to $0.5{\;}g/cm^3$ in sonamu. Compressive strength in Gumgangsong and Sonamu was about $30{\pm}5MPa$ and $25{\pm}5MPa$, resepectively. But the relative crystallinity and microfibril angle of two species were not different clearly. From these results of Gumgangsong and Sonamu, therefore, it was considered the main difference factors for both species were annual ring width and heartwood percentage.

• Journal of Forest and Environmental Science
• /
• v.9 no.1
• /
• pp.10-18
• /
• 1993

The study was carried out to investigate the physical (Density, Percentage of latewood, Percentage of pore zone, Mean annual ring width) and mechanical (Compressive strength parallel to the grain, Compression perpendicular to the grain, Shearing strength) properties of some major northern softwoods and hardwoods. The physical and mechanical properties of each species are summerized as Table 2 and the relationship between physical and mechanical factors are discussed. The results of this study were as follows: Density and percentage of latewood are closely related to physical and mechanical properties, but percentage of pore zone and mean annual ring width are remotely related to physical and mechanical properties.