• 제목/요약/키워드: annual maximum flow

검색결과 68건 처리시간 0.025초

도암호 유역에서 비점오염물질의 유출부하 특성 (Characteristics of Runoff Load from Nonpoint Source Pollutants in the Lake Doam Watershed)

  • 곽성진;발데브;김기영;강필구;허우명
    • 생태와환경
    • /
    • 제51권1호
    • /
    • pp.135-147
    • /
    • 2018
  • In order to investigate the runoff characteristics of nonpoint source pollutants in the Lake Doam watershed, water quality and flow rate were monitored for 38-rainfall events from 2009 to 2016. The EMC values of SS, COD, TN and TP were in the range of 33~2,169, 3.5~56.9, 0.09~7.65 and $0.06{\sim}2.21mg\;L^{-1}$, respectively. As a result of analyzing the effect of rainfall factor on the nonpoint source pollutant load, EMCs of SS, COD and TP showed a statistically significant correlation with rainfall (RA) (p<0.01) and SS showed highly significant correlation with maximum rainfall intensity (MRI, R=0.48). The load ranges of SS, COD, TN and TP were 10.4~11,984.6, 1.1~724.4, 0.6~51.6 and $0.03{\sim}22.85ton\;event^{-1}$, respectively, showing large variation depending on the characteristics of rainfall events. The effect of rainfall on the load was analyzed. SS, COD and TP showed a positive correlation, but TN did not show any significant correlation. The annual load of SS was the highest with $88,645tons\;year^{-1}$ in 2011 when rainfall was the highest with 1,669 mm. The result of impact analysis of nonpoint source pollution reduction project and land-use change on runoff load showed that pollutant load significantly reduced from 2009 to 2014 but SS and TP loads were increased from 2014 to 2016 due to increase in construction area. Therefore, we suggested that nonpoint source pollution abatement plan should be continued to reduce the soil loss and pollutants during rainfall, and countermeasures to reduce nonpoint source pollution due to construction need to be established.

LH-모멘트의 적정 차수 결정에 의한 설계홍수량 추정(II) (Estimation of Design Flood by the Determination of Best Fitting Order of LH-Moments(II))

  • 맹승진;이순혁
    • 한국농공학회지
    • /
    • 제45권1호
    • /
    • pp.33-44
    • /
    • 2003
  • This study was conducted to estimate the design flood by the determination of best fitting order for LH-moments of the annual maximum series at fifteen watersheds. Using the LH-moment ratios and Kolmogorov-Smirnov test, the optimal regional probability distribution was identified to be the Generalized Extreme Value (GEV) in the first report of this project. Parameters of GEV distribution and flood flows of return period n years were derived by the methods of L, L1, L2, L3 and L4-moments. Frequency analysis of flood flow data generated by Monte Carlo simulation was performed by the methods of L, L1, L2, L3 and L4-moments using GEV distribution. Relative Root Mean Square Error. (RRMSE), Relative Bias (RBIAS) and Relative Efficiency (RE.) using methods of L, Ll , L2, L3 and L4-moments for GEV distribution were computed and compared with those resulting from Monte Carlo simulation. At almost all of the watersheds, the more the order of LH-moments and the return periods increased, the more RE became, while the less RRMSE and RBIAS became. The Absolute Relative Reduction (ARR) for the design flood was computed. The more the order of LH-moments increased, the less ARR of all applied watershed became It was confirmed that confidence efficiency of estimated design flood was increased as the order of LH-moments increased. Consequently, design floods for the appled watersheds were derived by the methods of L3 and L4-moments among LH-moments in view of high confidence efficiency.

최소절단 문제의 자유계약 알고리즘 (A Free Agent Algorithm for Min-Cut Problem)

  • 이상운
    • 한국인터넷방송통신학회논문지
    • /
    • 제19권4호
    • /
    • pp.27-33
    • /
    • 2019
  • 공급지(s)에서 수요지(t)로 흐르는 복잡한 망에서 망의 최대 흐름을 결정하는 최소절단 면을 찾는 최소절단 문제는 난제로 알려져 있다. 이에 대해 증대경로 알고리즘은 증대경로를 갖는 단일 경로로 분할하여 병목 지점(간선)을 찾는 방식을 채택하고 있으나 최소절단면을 추가적으로 결정해야만 한다. 본 논문에서는 프로스포츠계에서 적용되고 있는 자유계약제 방식을 적용하여, 정점 수 n에 대해 수행 복잡도가 O(n)인 휴리스틱 탐욕 알고리즘을 제안한다. 자유계약 방식은 $v{\in}V{\backslash}\{s,t\}$정점들 중에서 $N_G(S),N_G(T)$정점들을 자유계약 선수라고 가정하고, 이 선수들의 연봉이 보다 상승하는 팀으로 이적하는 방식을 적용하였다. 제안된 알고리즘을 다양한 망 형태에 적용한 결과, 모든 망에서 최소절단 치 뿐 아니라 망에 존재하는 모든 최소절단 들을 찾을 수 있음을 보였다.

Development of an accelerated life test procedure considering the integrated equivalent load of an implement working pump for an agricultural tractor

  • Moon, Seok-Pyo;Baek, Seung-Min;Chung, Sun-Ok;Park, Young-Jun;Han, Tae-Ho;Kim, Yong-Joo
    • 농업과학연구
    • /
    • 제47권4호
    • /
    • pp.1123-1134
    • /
    • 2020
  • The goal of this study was to develop an accelerated life test for an implement working pump for an agricultural tractor. The field experiments were conducted to measure the load of an implement working pump during major agricultural operations such as plow tillage, rotary tillage, baler operations, and wrapping operations. The measurement system for an implement working pump load was constructed using a pressure sensor, the engine rotational speed, and the hitch pump displacement. The measured implement working pump load was calculated as an equivalent load for each agricultural operation using the Palmgren-Miner rule, which is a cumulative damage method. The equivalent load was calculated using the total load data and peak load data when the total data included the operation of an implement working. The annual usage time of the agricultural tractor was applied to develop two integrated equivalent loads. The acceleration factor was calculated to develop an accelerated life test and was calculated from the two integrated equivalent loads, the maximum pressure, and the flow rate conditions of the hitch pump. In Korea, the warranty life of a tractor is 2,736 hours, and the time required for the test to guarantee the operational life of tractors was calculated as 7,561 hours. The acceleration factors were calculated as 453.6 and 38.3, respectively, from the total load data and peak load data. The fatigue test time can be shortened by 16.7 and 197.4 hours according to the result of the acceleration factors.

ODA사업을 통한 미계측 중소하천 유역 홍수예경보시스템 구축 (Establishment of flood forecasting and warning system in the un-gauged small and medium watershed through ODA)

  • 고덕구;이치헌;전제복;고석현
    • 한국수자원학회논문집
    • /
    • 제54권6호
    • /
    • pp.381-393
    • /
    • 2021
  • 국립재난안전연구원의 재난안전 신기술 공적개발원조(ODA) 사업의 일환으로 2019년 라오스 볼리캄싸이주 남싼강유역의 보리칸을 대상으로 홍수예경보시스템을 구축하였다. 미계측 중소하천유역인 대상 지역에 강우량와 유출량의 실시간 관측을 위한 관측소 및 경보국을 설치하였으며, 실시간 자료 관리와 홍수예경보 기능 등을 수행하는 소프트웨어도 개발되었다. 홍수경보 기준 설정 및 홍수예측을 위한 nomograph 개발을 위해 대상 지역의 30년 치 연도별 최대 일강우량자료와 하천측량성과를 바탕으로 수리·수문분석을 수행하였다. 본 논문은 시스템 구축 과정과 방법론을 소개하고, 시스템 설치 후 2020년 실시간 관측 수집된 자료들을 바탕으로 수행한 시스템의 적용성 검토 결과를 제시하였다.

연중 하천유량 관리를 위한 기간 구분 및 관리범위 설정 방안 (The method of period division and range setting for annual river discharge management)

  • 박태선
    • 한국수자원학회논문집
    • /
    • 제56권1호
    • /
    • pp.1-9
    • /
    • 2023
  • 현재까지는 연중 하천유량의 관리기간은 홍수기와 비홍수기로 구분하고, 관리해야 할 유량의 범위는 갈수량에서 홍수량까지로 폭넓게 규정하고 있다. 본 연구에서는 4대강 8개 지점의 장기간 일평균유량 자료를 이용하여1년을 유량의 분산과 평균이 동질한 기간들로 구분하고, 기간별 유량의 평균과 표준편차를 이용하여 유량의 관리범위를 설정하는 방안을 제시한다. 연구결과, 연중 관리기간은 지점에 따라 차이는 있으나 홍수기 이전, 홍수기, 홍수기 이후로 구분할 수 있었으며, 기간을 세분화하면 최소유량에 대한 최대유량의 비도 낮아지는 것을 알 수 있었다. 또한, 연중 일평균유량이 갈수량 이상 홍수량 이하가 되도록 기간별 일평균유량의 관리범위를 기간별 일평균유량의 평균 ±표준편차로 설정하는 방안도 제시하였다.

홍수조절댐에서의 배사관 설치에 따른 상류 하천의 하상변동에 관한 수치모의 연구 (Numerical Analysis for Bed Changes in the Upstream Channel due to the Installation of Sediment Release Openings in the Flood Control Dam)

  • 지운;손광익;김문모
    • 한국수자원학회논문집
    • /
    • 제42권4호
    • /
    • pp.319-329
    • /
    • 2009
  • 홍수피해를 경감시키고 홍수조절을 목적으로 계획되는 홍수조절용댐의 경우 홍수 발생 기간 외에는 상류와 하류 하천간의 흐름 차단을 억제하고 상류로부터 유입되는 유사가 댐 상류 부분에 퇴적되는 현상을 방지하기 위해 댐에 상시 개방되어 있는 배사관을 설치하기도 한다. 국내에서는 임진강 유역의 홍수피해 저감을 위해 건설되는 한탄강홍수조절댐에 배사관과 생태통로를 설치하도록 계획되었다. 본 연구에서는 1차원 HEC-6 모형을 이용하여 한탄강홍수조절댐 건설로 인한 댐 상류의 퇴사현상을 댐 건설 전의 현상과 비교 분석하였으며 연평균유량 조건뿐만 아니라 연간 유량변동을 고려한 대표유량수문곡선을 적용하여 퇴사현상을 모의하였다. 수치모의 결과, 댐 건설로 인한 하류단 수위 변화가 발생하더라도 하상변동의 영향은 댐에서 상류 2 km 구간을 넘지 않는 것으로 나타났다. 또한 댐 건설 후 배사관의 설치 유무에 따른 배사관 주변과 댐 상류 하상 변화를 예측하기 위해 2차원 RMA2 및 SED2D 모형을 이용하였으며 한탄강홍수조절용댐의 댐 저부에 설치된 배사관의 배사효과는 저수지 내의 퇴적고를 저감시키는 효과가 있는 것으로 나타났다.

총량관리 단위유역 평가기법을 활용한 서울특별시 주요 유입 지천의 수질개선효과에 관한 연구 (A Study on the Water Quality Improvement of Major Tributaries in Seoul, Applying Watershed Evaluation Techniques)

  • 심규현;김경훈;임태효;김용석;김성민
    • 한국물환경학회지
    • /
    • 제37권1호
    • /
    • pp.32-46
    • /
    • 2021
  • South Korea has been divided into quantities and water quality, and due to a revision of the Government Organization law in June 2018, the controversial water management system was integrated into the Ministry of Environment. The total Maximum Daily Loads System has been called the flower of water quality control, and since 2004, all three major river systems which have been introduced into the Han River system, despite its various difficult environments, and subsequently leading to all of the four major rivers undergoing obligatory implementation since 2013. Currently, the target TMDL (Han River Phase 1 and Other Water Systems Phase 3) for the 2020 stage has been implemented. The domestic TMDL established a basic plan for calculating the load which complies with the unit watershed's target water quality, as well as an implementation plan for annual load management, both which have been institutionalized in order to evaluate load compliance on a repeated annual basis. Local governments ask external organizations to conduct investigations every year in order to assess the transition, which thereby requires tens of millions of won every year. Therefore, an assessment and management model that can be easily operated at the TMDL personnel level is required. In this study, when the Han river Water System TMDL was implemented in earnest, we confirmed the the water quality improvement effect when TMDL was introduced to major inflow tributaries (TancheonA, JungnangA, AnyangA) under the Seoul City's jurisdiction through the use of the total amount control unit basin evaluation technique. By presenting customized management measures, we propose the guidelines that are necessary for determining more effective water environmental policies.

Major environmental factors and traits of invasive alien plants determining their spatial distribution

  • Oh, Minwoo;Heo, Yoonjeong;Lee, Eun Ju;Lee, Hyohyemi
    • Journal of Ecology and Environment
    • /
    • 제45권4호
    • /
    • pp.277-286
    • /
    • 2021
  • Background: As trade increases, the influx of various alien species and their spread to new regions are prevalent and no longer a special problem. Anthropogenic activities and climate changes have made the distribution of alien species out of their native range common. As a result, alien species can be easily found anywhere, and they have nothing but only a few differences in intensity. The prevalent distribution of alien species adversely affects the ecosystem, and a strategic management plan must be established to control them effectively. To this end, hot spots and cold spots were analyzed according to the degree of distribution of invasive alien plants, and major environmental factors related to hot spots were found. We analyzed the 10,287 distribution points of 126 species of alien plants collected through the national survey of alien species by the hierarchical model of species communities (HMSC) framework. Results: The explanatory and fourfold cross-validation predictive power of the model were 0.91 and 0.75 as AUC values, respectively. The hot spots of invasive plants were found in the Seoul metropolitan area, Daegu metropolitan city, Chungcheongbuk-do Province, southwest shore, and Jeju island. Generally, the hot spots were found where the higher maximum temperature of summer, precipitation of winter, and road density are observed, but temperature seasonality, annual temperature range, precipitation of the summer, and distance to river and sea were negatively related to the hot spots. According to the model, the functional traits accounted for 55% of the variance explained by the environmental factors. The species with higher specific leaf areas were more found where temperature seasonality was low. Taller species preferred the bigger annual temperature range. The heavier seed mass was only preferred when the max temperature of summer exceeded 29 ℃. Conclusions: In this study, hot spots were places where 2.1 times more alien plants were distributed on average than non-hot spots (33.5 vs 15.7 species). The hot spots of invasive plants were expected to appear in less stressful climate conditions, such as low fluctuation of temperature and precipitation. Also, the disturbance by anthropogenic factors or water flow had positive influences on the hot spots. These results were consistent with the previous reports about the ruderal or competitive strategies of invasive plants instead of the stress-tolerant strategy. The functional traits are closely related to the ecological strategies of plants by shaping the response of species to various environmental filters, and our result confirmed this. Therefore, in order to effectively control alien plants, it is judged that the occurrence of disturbed sites in which alien plants can grow in large quantities is minimized, and the river management of waterfronts is required.

건물에너지시뮬레이션을 활용한 연동형 온실 및 작물에너지모델 설계 및 이의 냉·난방부하 산정 (Design of Energy Model of Greenhouse Including Plant and Estimation of Heating and Cooling Loads for a Multi-Span Plastic-Film Greenhouse by Building Energy Simulation)

  • 이승노;박세준;이인복;하태환;권경석;김락우;여욱현;이상연
    • 생물환경조절학회지
    • /
    • 제25권2호
    • /
    • pp.123-132
    • /
    • 2016
  • The importance of energy saving technology for managing greenhouse was recently highlighted. For practical use of energy in greenhouse, it is necessary to simulate energy flow precisely and estimate heating/cooling loads of greenhouse. So the main purpose of this study was to develope and to validate greenhouse energy model and to estimate annual/maximum energy loads using Building Energy Simulation (BES). Field experiments were carried out in a multi-span plastic-film greenhouse in Jeju Island ($33.2^{\circ}N$, $126.3^{\circ}E$) for 2 months. To develop energy model of the greenhouse, a set of sensors was used to measure the greenhouse microclimate such as air temperature, humidity, leaf temperature, solar radiation, carbon dioxide concentration and so on. Moreover, characteristic length of plant leaf, leaf area index and diffuse non-interceptance were utilized to calculate sensible and latent heat exchange of plant. The internal temperature of greenhouse was compared to validate the greenhouse energy model. Developed model provided a good estimation for the internal temperature throughout the experiments period (coefficients of determination > 0.85, index of agreement > 0.92). After the model validation, we used last 10 years weather data to calculate energy loads of greenhouse according to growth stage of greenhouse crop. The tendency of heating/cooling loads change was depends on external weather condition and optimal temperature for growing crops at each stage. In addition, maximum heating/cooling loads of reference greenhouse were estimated to 644,014 and $756,456kJ{\cdot}hr^{-1}$, respectively.