• 제목/요약/키워드: anion exchanger

검색결과 53건 처리시간 0.033초

Evaluation of the Nitrate Anion in Recon Extract by Adsorbents

  • Han, Young-Rim;Sung, Yang-Joo;Park, Jin-Won;Kim, Yang-Ok;Rhee, Moan-Soo
    • 한국연초학회지
    • /
    • 제29권2호
    • /
    • pp.104-109
    • /
    • 2007
  • The amount of nitrate in the tobacco leaf has been shown to be correlated with the levels of alkaloids and nitrosamines. Also the nitrate content of the tobacco correlated closely with the smoke delivery of nitric oxide and tobacco-specific nitrosamines (TSNAs). These are related with the effect of the reconstituted tobacco leaf(Recon) using the tobacco stems. Adsorption process is gaining interest as one of the effective processes of advanced liquid treatment for liquid containing unnecessary materials. This study is focused on the evaluation of four anion exchangers, a cation exchanger and an activated carbon, as adsorbents for reduction of nitrate anion from Recon extract. In order to analyze the nitrate anion, the IC method used in this work was carried out with a Dionex ICS-2000 system. The effects of dosages of adsorbents and concentration of extract on the removal of nitrate anion were examined. Experimental results showed that for nitrate-anion exchanger, nitrate-cation exchanger and nitrate-activated carbon adsorption system, approximately 70 %, 10 %, and 4 % removal efficiencies were achieved at the Brix 10 and the 20 % addition. Although the activated carbon was little efficient for removal of nitrate ion, the removal of nicotine was very efficient at given conditions.

이온교환체에 의한 담배 주류연 중 카보닐 화합물의 선택적 흡착 특성 및 흡착 메카니즘 구명 (Investigation of Adsorption Mechanism and Selective Adsorption of Carbonyl Compounds of Mainstream Tobacco Smoke by Ion Exchangers)

  • 이존태;김효근;지상운;황건중;이문수;박진원
    • 한국연초학회지
    • /
    • 제26권2호
    • /
    • pp.159-167
    • /
    • 2004
  • This work has been conducted to select appropriate filter materials for removing carbonyl compounds in mainstream tobacco smoke. To investigate of the usability of this filter materials, two types of bead ion exchangers were synthesized and their adsorption characteristics for carbonyl compounds were investigated. Sulfonic acid group-containing cation exchanger and ammonium group-containing anion exchanger were synthesized by the suspension polymerization of glycidylmethacrylate(GMA) and divinylbenzene(DVB) followed by the subsequent functionalization, respectively. The removal efficiency of carbonyl compounds by these two ion exchangers increased in the presence of moisture. However, the amount of carbonyl compounds adsorbed on the anion exchanger was larger than that on the cation exchanger under two levels of water contents tested. This phenomenon seems to arise from the electron delocalization in carbonyl group of the anion exchangers. There was not any significant relationship between the amount of carbonyl compounds adsorbed on ion exchangers and the length of adsorption column. From the large ion exchange capacity and rapid ion exchange reaction rate of the anion exchanger, it is suggested that the anion exchanger may be a good filter material for removing carbonyl compounds in the mainstream tobacco smoke.

Purification of Filamentous Bacteriophage M13 by Expanded Bed Anion Exchange Chromatography

  • Tau Chuan;Chee Kin;Wen Siang;Beng Ti;Wan, Wan-Mohammad;Arbakariya
    • Journal of Microbiology
    • /
    • 제42권3호
    • /
    • pp.228-232
    • /
    • 2004
  • In this paper, we investigated the development of a simplified and rapid primary capture step for the recovery of M13 bacteriophage from particulate-containing feedstock. M13 bacteriophage, carrying an insert, was propagated and subsequently purified by the application of both conventional multiple steps and expanded bed anion exchange chromatography. In the conventional method, precipitation was conducted with PEG/NaCl, and centrifugation was also performed. In the single step expanded bed anion exchange adsorption, UpFront FastLine$\_$TM/20 (20mm i.d.) from UpFront Chromatography was used as the contactor, while 54$m\ell$ (H$\_$o/=15cm) of STREAMLINE DEAE (p=1.2 g/㎤) from Amersham Pharmacia Biotechnology was used as the anion exchanger. The performance of the two methods were evaluated, analysed, and compared. It was demonstrated that the purification of the M13 bacteriophage, using expanded bed anion exchange adsorption, yielded the higher recovery percentage, at 82.86%. The conventional multiple step method yielded the lower recovery percentage, 36.07%. The generic application of this integrated technique has also been assessed.

Ion Exchange Recovery of Rhenium and Its Determination in Aqueous Solutions by Diffuse Reflection Spectroscopy

  • Kalyakina, O.P.;Kononova, O.N.;Kachin, S.V.;Kholmogorov, A.G.
    • Bulletin of the Korean Chemical Society
    • /
    • 제25권1호
    • /
    • pp.79-84
    • /
    • 2004
  • The existing technological schemes for processing rhenium-containing raw materials involve the recovery of Re from solutions, which can be effectively achieved by anion exchange method. The application of anion exchange also allows to study rhenium state in aqueous solutions and to develop analytical control methods. The present work is focused on investigation of ion exchange equilibrium in the analytical system Re(VII)-HCl-$SnCl_2$-KSCN-anion exchanger by means of sorption-desorption method as well as by electron, IR- and diffuse reflection spectroscopy. It was shown that rhenium can be quantitatively recovered from this system. It is proposed to use the sorption-spectroscopic method for Re(VII) determination in aqueous solutions. The calibration curve is linear in the concentration range of 0.5-20.0 mg/L (sample volume is 25.0 mL) and the detection limit is 0.05 mg/L. The presence of Mo(VI), Cu(II), Fe(II, III), Ni(II), Zn(II) as well as $K^+,\;Na^+$ do not hinder the solid-phase determination of rhenium. Rhenium (VII) determination by diffuse reflection spectroscopy was carried out in model solutions as well as in samples of river-derived water and in solutions obtained after the dissolution of spent catalysts.

Reuses Of Wash Water Effluents Of The Ion-Exchanger Units Of Water Demineralization Plant For Economic And Environmental Benefits

  • Miah, Raisuddin
    • 분석과학
    • /
    • 제8권4호
    • /
    • pp.799-806
    • /
    • 1995
  • In industrial field, a large volume of regenerants (acid and caustic soda) and their washing effluents are regularly disposed off from the water demineralization plant during regeneration of the ion-exchanger units. Of these waste effluents, a part of the wash water discharged from the single bed Anion and Mixed Bed units can be utilized at a certain stage of their washing cycles when its conductivity is fallen down and becomes considerably less than that of the input raw water. The main aim of this specific waste effluent utilization is to dilute the TDS concentration of the input raw water (fed into the single bed ion-exchanger units) by blending. The achievement is the increase of the longevity of the production cycles of the I.E. units along with the improvement of the production quality and decrease of the regeneration frequencies. As a result, regenerant consumption would be saved because of the reduction of ionic load in feed water which will ultimately reduce the water purification cost. At the same time, the environment pollution will also be protected to a considerable extent. This operational measure is quite effective and useful specially where high TDS water is demineralized only by single bed ion-exchangers. In such case, the water treatment plant is very often found to suffer from both production quality and quantity in addition to carrying out of random and restless regenerations. Proper reuses of the aforesaid wash water effluents of the Anion and MB units excellently minimizes the difficulties experienced in practice. This paper contains the utilities and techniques of reuses of the different kinds of waste effluents of the industrial water treatment plant in addition to the specific reuses of the post-regeneration wash waters of the Anion and MB ion-exchanger units.

  • PDF

아민화된 다공성 및 비다공성 폴리스티렌 디비닐벤젠 음이온교환체의 성질 (The Properties of Porous and Non Porous Aminated Polystyrene Divinylbenzene Anion Exchanger)

  • 김동원;오제직;민태원
    • 대한화학회지
    • /
    • 제29권3호
    • /
    • pp.233-238
    • /
    • 1985
  • 비다공성 및 다공성 폴리스티렌 디비닐벤젠 공중합체를 합성하고, 이것을 클로로메틸화 한후, 메틸아민으로 아미노화하여 약염기성 음이온교환수지인, 50∼100mesh의 비다공성, N-APSTDVB와 다공성, P-APSTDVB를 만들었다. 합성한 이들 음이온교환수지를 적외선 흡수스펙트럼으로 확인하였다. 이들 음이온교환수지의 최대 이온교환용량은 4.86meq/g이었다. 다공성 폴리스티렌 디비닐벤젠 공중합체, P-APSTDVB의 세공용적은, 디비닐벤젠의 볼륨퍼센트를 30%로 하였을 때, X$_{diluent}$의 증가에 따라서 증가하였다. 또한 X$_{diluent}$의 양을 0.5로 일정하게 하였을때, P-APSTDVB공중합체의 세공용적은, 디비닐벤젠의 볼륨퍼센트가 증가함에 따라 증가하였다. 디비닐벤젠의 퍼센트를 8%로 일정하게 하고, X$_{heptane}$을 0.5로 하였을 때, 합성한 공중합체와 음이온교환수지의 세공용적은, P-PSTDVB >P-APSTDVB >N-PSTDVB순으로 감소하였다. 여러 농도하에서의, 여러종류의 알코올 수용액중에서의 N-APSTDVB음이온교환수지에 대한 붕산의 분포계수가, 또한 논의되었다.

  • PDF

강 염기성 음이온 교환수지의 셀룰로우스 섬유용 반응성 염료에 대한 흡착 특성 (Adsorption Characteristics of Strong Basic Anion Exchanger to Cellulose Reactive Dye)

  • 임경은;정팔진;권지영
    • 한국물환경학회지
    • /
    • 제23권1호
    • /
    • pp.27-32
    • /
    • 2007
  • This study focused on estimating the feasibility of a strong basic anion exchanger (PA312OH) as a sorbent for the removal of residual reactive dye and saving chemicals and water. Cellulose reactive dye C.I.RB49 was tested because reactive dye is the largest single group of dyes and that dye needs larger amount of inorganic salts as dyeing agent but nearly 50% of reactive dyes may be lost to the effluent. The adsorption characteristics of PA312OH for C.I.RB49 were as follows. Ion-selectivity among the dye and inorganic salts was Dye > ${SO_4}^{2-}$ > ${CO_3}^{2-}$ > $Cl^-$. C.I.RB49 was exchanged more than 3 times ${SO_4}^{2-}$ and ${CO_3}^{2-}$ and $Cl^-$ was not exchanged absolutely. The exchanging velocity was increased exponentially with increasing temperature. This result is positive effect on treating the high temperature dyeing process wastewater. The exchanged dye percents to initial were 96.8% and 99% at flow rate 20.5 mL/min. and 3.7 mL/min.. The exchanging capacity of PA312OH for C.I.RB49 was 215.2 mg/g at conc.=369.2 mg/L, Temp.=$25^{\circ}C$. 74% inorganic salts were recrystallized from real dark reactive color dyeing wastewater treated with PA312OH.

내열성 음이온교환수지로서 Aminated Poly(arylene ether sulfone)의 합성과 물성 (Synthesis and Characteristics of Aminated Poly(arylene ether sulfone) as Thermostable Anion Exchanger)

  • 손원근;유현지;황택성;김동철;김상헌;송해영
    • 폴리머
    • /
    • 제26권1호
    • /
    • pp.1-8
    • /
    • 2002
  • 열 안정성과 우수한 기계적 성질을 갖는 poly(arylene ether sulfone) (PAES)을 음이온교환수지의 지지체로 이용하였다. $1^{\circ}$-Aminated poly(arylene ether sulfone) ($1^{\circ}$-APAES)은 PAES을 리튬화한후 환원 반응시켜 제조하였고, $3^{\circ}$-APAES의 아민기를 알킬화 반응시켜 제조하였다. PAES와 APAES들의 구조는 FT-IR과 H$^1$-NMR으로 확인하였고, 열적 특성은 DSC와 TG 분석을 통하여 조사하였다. PAES에 아민기가 도입됨에 따라 $T_g$는 증가하였고, 초기 열분해 온도는 감소하였다. $1^{\circ}$-APAES과 $3^{\circ}$-APAES의 이온교환용량은 각각 1.19와 1.45 meq/g 이었다.

음이온 교환수지를 이용한 인제거 향상 (Enhanced removal of phosphate on modified ion exchanger with competing ion)

  • 남주희;이상협;최재우;홍석원;안병렬
    • 상하수도학회지
    • /
    • 제27권1호
    • /
    • pp.121-128
    • /
    • 2013
  • The concern for dissolved phosphate in water/wastewater has been increasing because of the risk for eutrophication. A variety of conventional and advanced technologies were applied to meet the enforced new regulation of phosphate around the world. However, there still remained a lot of challenge because most introduced/developed method, for example, biological and physic-chemical treatment is not easy to satisfy the new regulation of phosphate in water. In order to meet the new regulation, the application of ion exchanger has been tried which showed that the removal efficiency for phosphate was strongly determined by in the presence of the competing ion, especially sulfate. As results, a new class of ion exchanger governed by ligand exchange was developed and investigated to increase the selectivity for phosphate. The current study using organic/inorganic anion exchanger developed with Lewis acid-base interaction confirms the selectivity for phosphate over sulfate. According to isotherm test and column test, the value of the maximum phosphate uptake (Q) showed 64 mg/g as $po{_4}^{3-}$ and the breakthrough for phosphate occurs after 1000 min and completely finishes at 2500 min, respectively.

Sorption and Separation of Thiocyanate Gold and Silver Complexes and Determination of Gold by Diffuse Reflectance Spectroscopy

  • Danilenko, N.V.;Kononova, O.N.;Kachin, S.V.;Kholmogorov, A.G.;Dmitrieva, Zh.V.;Plotnikova, E.A.
    • Bulletin of the Korean Chemical Society
    • /
    • 제25권7호
    • /
    • pp.1019-1024
    • /
    • 2004
  • The present paper is focused on simultaneous sorption concentration of gold (III) and silver (I) from thiocyanate solutions using high-selective anion exchanger AN-25 and subsequent separation of these ions at various concentrations of thiocarbamide (eluent). As a result, silver (I) ions are completely eluted from AN-25 and gold (III) ions remain in the resin phase and can be determined directly in the solid phase by diffuse reflection spectroscopy. It is proposed to use the sorption-spectroscopic method for Au(III) determination in aqueous solutions. The calibration curve is linear in the concentration range of 1-19 mg/L (sample volume is 10.0 mL) and the detection limit is 0.05 ${\mu}g/mL$. The presence of Cu(II), Co(II), Fe(II) do not hinder this determination. Au(III) was determined in industrial solutions.