• The Journal of Korean Physical Therapy
• /
• v.25 no.6
• /
• pp.379-385
• /
• 2013

Purpose: The purpose of this study is to compare kinematics on lower limbs between stair walking with high heel and barefoot in healthy adult women. Methods: 18 healthy adult women were recruited in this study. The subjects performed stair ascent and descent with high heels and barefoot. The experiment was conducted in random order and repeated three times for each stair walking with high heels and barefoot. The movements of lower limb joints were measured and analyzed using a three-dimensional analysis system. Results: The ankle, knee, and hip flexion angles on the sagittal plane exhibited statistically significant differences between stair ascent and descent with high heels and barefoot. The pelvic forward tilt angles showed statistically significant differences only during stair ascent. The ankle inversion, hip abduction and pelvic lateral tilt angles on the frontal plane showed statistically significant differences between stair walking with high heels and barefoot. On the transverse plane, the hip rotation angles showed statistically significant differences between the high-heeled and barefoot gait during stair ascent and descent. However, the pelvic rotation angles showed no statistically significant differences. Conclusion: Therefore, wearing high-heeled shoes during stair walking in daily life is considered to influence lower limb kinematics due to the high heel, and thus poses the risks of pain, and low stability and joint damage caused by changes in the movement of lower limb joints.

• The Journal of Korean Physical Therapy
• /
• v.25 no.6
• /
• pp.411-416
• /
• 2013

Purpose: The purpose of the present study was to determine the effects of activation of gluteus maximus (Gmax) and abdominal muscle using EMG biofeedback on lumbosacral and tibiocalcaneal angles in standing position. Methods: Fourteen healthy subjects with normal feet participated in the present study. Electromyographic (EMG) biofeedback using visual cue was used to activate the external oblique (EO) and Gmax. The lumbosacral and tibiocalcalcaneal angles were measured by electronic goniometers. All the subjects were instructed to activate the Gmax and EO monitoring increasing amounts of the muscle activities in each muscle. The lumbosacral and tibiocalcaneal angles were collected in three trials during resting and activation of each muscle using EMG biofeedback in standing position. The mean value of three trials was used in the data analysis. A paired-t test was used to compare the lumbosacral and tibiocalcaneal angles between resting and activation of the Gmax and EO using EMG biofeedback. Results: The lumbosacral and tibiocalcaneal angles were significantly less in the resting compared to activation using EMG biofeedback (p<0.05). Conclusion: The activaition of Gmax and abdominal muscles using EMG biofeedback play role to control the pronation of subtalar joint during the weight-bearing.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.18 no.8
• /
• pp.747-753
• /
• 2005

We Investigated the current limiting characteristics of the flux-lock type superconducting fault current limiter(SFCL) by fault angles. The flux-lock type SFCL consists of the primary and the secondary copper coils wound in parallel through the iron core and YBCO thin film. In this paper, the current limiting characteristics of the flux-lock type SFCL by fault angles in case of the subtractive and the additive polarity windings were compared and analyzed. The flux-lock type SFCL limited fault current more quickly as the fault angles increased. On the other hand, the initial power burden of the superconducting element during the fault increased as the fault angles increased. In addition, we found that the resistance of the flux-lock type SFCL in case of the subtractive polarity winding was more increased than that of the additive polarity winding. The peak current of the fault current in case of the subtractive polarity winding was larger than that of the additive polarity winding.

• Journal for History of Mathematics
• /
• v.19 no.1
• /
• pp.79-90
• /
• 2006

The purpose of this paper is to derive the ratios of trigonometric special angles from Euclid's by constructing regular pentagon and decagon. The intention of this paper is started from recognizing that teaching of the special angles in secondary math classroom excessively depends on algebraic approaches rather geometric approaches which are the origin of the trigonometric ratios. In this paper the method of constructing regular pentagon and decagon is reviewed and the geometric relationship between this construction and trigonometric special angles is derived. Through such geometric approach the meaning of trigonometric special angles is analyzed from a geometric perspective and pedagogical ideas of teaching these trigonometric ratios is suggested using history of mathematics.

• Journal of Fisheries and Marine Sciences Education
• /
• v.25 no.2
• /
• pp.405-409
• /
• 2013

In this study, the researcher tried to analyse the effects of various palm angles in sculling on the variation of underwater weighting. An experiment was conducted on the study subjects of 14 males with life guard licences issued by the Korean Red Cross, living in B district with their spontaneous consent after explaining the purpose and method of this study sufficiently. The effects of various angles in sculling on underwater weighting is as follows; The underwater weighting in sculling gradually decreased with the increasing angle of the palm from $0^{\circ}$ to $45^{\circ}$ during sculling(p<.001). Overall, it is concluded that the optimal efficiency of sculling can be achieved at the angles $30^{\circ}$ and $45^{\circ}$. But, it is a little limited that we generalize the result drawn from variation of underwater weighting depending on the angles as an actual lift and drag value, which warrants further studies on the measuring of overall swimming movement of rotary kick of our lower body as well as sculling, along with various subjects.

• Journal of the Korean Society of Visualization
• /
• v.9 no.2
• /
• pp.40-47
• /
• 2011

Tilt-rotor aircraft can be used in various fields because they have the capabilities of the vertical take-off and landing and the high-speed cruise flight. In the present study, the flow analysis of a tilt-rotor aircraft is conducted at various tilt angles. The lift and drag forces of the tilt-rotor aircraft are obtained and the wakes by the rotor-blade are visualized. The result shows that the rotor-blade affects the lift force in a hovering mode and the main wing has an influence on the lift force in a cruise mode. Additional thrust is required at the tilt angle of around 40 degree due to the least lift force. The drag force is dependent on the rotor-blade at overall tilt angles. The minus drag force appears between the tilt angles of 90 degree and 55 degree. Also, the drag force is dramatically increased at the other tilt angles. The wake by rotor-blade affects the flow around the fuselage of the tilt-rotor aircraft at the tilt angles of 75 degree and 60 degree.

• Journal of the Society of Naval Architects of Korea
• /
• v.47 no.2
• /
• pp.141-149
• /
• 2010

It is essential to find oscillating angles and periods in a seaway when designing and manufacturing stabilizers. It is difficult to find oscillating angles and periods in high speed turning and they vary with ship speed and wave heading angles, therefore, proper algorithm to measure oscillating periods in a seaway. In the present study, three kinds of algorithms are developed to measure oscillating angles periods in a seaway. Dual axis tilt sensor of low price is used to measure oscillating angles, and the effect of lateral accelerations on tilt sensor have been reduced by the fusion algorithm using the gyro sensor signals. Analog and digital filters are applied to minimize the noise of the signals. Three kinds of algorithms, zero crossing, peak to peak and moving zero crossing algorithm, are developed to measure oscillating periods in a seaway. It is found that the moving zero algorithm showed the best results in the sea trials.

• Journal of the Ergonomics Society of Korea
• /
• v.21 no.1
• /
• pp.81-93
• /
• 2002

This study aims to provide joint angles of comfort for females, based on the psychophysical scaling method. Ten female subjects participated in the experiment for measuring perceived discomfort for varying joint motions. The subjects were instructed to maintain given joint motions for a minute, and to rate their perceived discomfort for the motions during a minute's rest by using the free modulus method of the magnitude estimation. Joint angles of comfort were calculated from the regression equations based on the experimental results, in which levels of joint motions were used as independent variables and perceived discomforts as dependent variables. The results showed that joint angles of comfort for the joint motions investigated were much smaller than full range of motions for corresponding joint motions. The ratios of joint angle of comfort to its range motion for the hip were found to be smallest of all joint motions dealt with in this study, and those for the neck were the largest. In addition, comfortable joint angles for females were much smaller than those for males. It is recommended that when designing or evaluating workplaces ergonomically, different comfortable joint angles should be applied according to workers' or population's gender.

• Steel and Composite Structures
• /
• v.44 no.6
• /
• pp.789-801
• /
• 2022

In order to study the influence of loading angles on seismic performance of steel reinforced concrete (SRC) special-shaped columns, cyclic loading tests and finite element analysis (FEA) were both carried out. Seven SRC special-shaped columns, including two L-shaped columns, three T-shaped columns and two cross-shaped columns, were tested, and the failure patterns of the columns with different loading angles were obtained. Based on the tests, the FEA models of SRC special-shaped columns with different loading angles were established. According to the simulation results, hysteretic curves and seismic performance indexes, including bearing capacity, ductility, stiffness and energy dissipation capacity, were analyzed in detail. The results showed that the failure patterns were different for the columns with the same section and different loading angles. With the increasing of loading angles, the hysteretic curves became fuller and the bearing capacity and initial stiffness appeared increasing tendency, but the energy dissipation capacity changed insignificantly. When the loading angle changed, the ductility got better with the larger area of steel at the failure side for the unsymmetrical section and near the neutral axis for the symmetrical section, respectively.

• The korean journal of orthodontics
• /
• v.48 no.1
• /
• pp.3-10
• /
• 2018

Objective: The purpose of this study was to predict the optimal bending angles of a running loop for bodily protraction of the mandibular first molars and to clarify the mechanics of molar tipping and rotation. Methods: A three-dimensional finite element model was developed for predicting tooth movement, and a mechanical model based on the beam theory was constructed for clarifying force systems. Results: When a running loop without bends was used, the molar tipped mesially by $9.6^{\circ}$ and rotated counterclockwise by $5.4^{\circ}$. These angles were almost similar to those predicted by the beam theory. When the amount of tip-back and toe-in angles were $11.5^{\circ}$ and $9.9^{\circ}$, respectively, bodily movement of the molar was achieved. When the bend angles were increased to $14.2^{\circ}$ and $18.7^{\circ}$, the molar tipped distally by $4.9^{\circ}$ and rotated clockwise by $1.5^{\circ}$. Conclusions: Bodily movement of a mandibular first molar was achieved during protraction by controlling the tip-back and toe-in angles with the use of a running loop. The beam theory was effective for understanding the mechanics of molar tipping and rotation, as well as for predicting the optimal bending angles.