• Journal of Korean Neurosurgical Society
• /
• 제29권2호
• /
• pp.249-254
• /
• 2000

Objective : As a minimally invasive strategy, endoscopic technique was introduced for removal of the traumatic intracerebral hematoma. Material and Method : A 54-year-old man with three-day history of seizure and progressive mental deterioration after traffic accident was presented. Computerized Tomography(CT) of the brain showed a huge intracerebral hematoma on the right frontal lobe and ventricle. The operation was performed via right frontal superolateral keyhole with 2cm eyebrow skin incision. Using 0-degree and 30-degree angled lens 4mm rigid endoscopes, nearly all of the hematoma was evacuated under the direct endoscopic visualization and a ventricular catheter was exactly placed into the frontal horn of the right lateral ventricle at the end of procedure. Results : The seizure was discontinued and neurological status had been improved during postoperative periods. Postoperative CT demonstrated that most of the hematoma was removed and the ventricular drainge tube was exactly placed in the right foramen of Monro. Conclusion : With endoscopic technique, the authors successfully evacuated traumatic intracerebral hematoma and exactly placed the ventricular drainage catheter under direct visualization. This technique may be considered as an another option for removal of traumatic intracerebral hematoma.

• Journal of Biosystems Engineering
• /
• 제33권4호
• /
• pp.217-223
• /
• 2008

In this study, a garlic clove planter which is capable of planting holes in soil and planting a clove at the same time was designed and tested for film mulched beds. Planting characteristics of the planter were measured through field experiment. Some characteristics were analyzed with multibody dynamic simulation software. Simulation was performed on opening time of the planting hopper. Measured characteristics were position, angle, and reposition amount of garlic in sowing hole. Experiment results showed that the planted position of garlic in planting was 23.0 mm from the hole wall. The reposition amount of garlic was varied with its position and angle when the planted garlic was pressed by an angled compaction wheel. In case of type II position, the position movement of garlic was larger than type I. Average position movement of type II was 11.5 mm at $20^{\circ}$ of compaction wheel angle. These data suggest that cutting diameter of film opening must be larger than 33 mm to provide enough space for garlic sprouting. Also, simulation results showed that the maximum opening time of the planting hopper was 0.26 second.

• 통상정보연구
• /
• 제6권3호
• /
• pp.63-79
• /
• 2004

Peer-to-peer(P2P) has potential strength and possible factors which enable it to develop toward a new business by supplementing the limitation of the existing central server-type network. In various business sectors, various attempts have already been made to apply P2P. The computing power which was possible to be formed through peer-to-peer networking will become a powerful tools for expanding toward new business area depending the utilization methods by sector. Although the technology-centric P2P concept is a major interest now, its development direction will head toward service-centric P2P concept for satisfying desires of end-users(individual peers) for reliable contents and improving their purchasing convenience. But the solution requisites should be solved for the efficient application of P2P to business such as the establishment of and supplement for the industrial standard and legal system for P2P, the enhancement of peers recognition of P2P. Presently e-commerce using P2P is being implemented by a few enterprises locally by means of B2C. But if many enterprises enter this type of e-commerce, and the standardization of peer programmes, goods and documents is made, it will be able to be extended to B2B. Also it seems that it can be utilized in international transactions as well as in domestic transactions. So there is much room for the application of P2P to be extended further. Also there has been presented the necessity for related industries to support their work with theories and for academic studies to be made actively to set the direction of its development. It is hoped that multi-angled and in-depth studies on the utilization of P2P and various attempts to application of it to business be made on the basis of this study. For the development of P2P, continuous study and attempts are needed. The field of P2Ps application is very large and it will become a powerful tool, depending upon its application methods.

• 한국유체기계학회 논문집
• /
• 제4권3호
• /
• pp.7-13
• /
• 2001

The present study investigates convective heat/mass transfer and flow characteristics inside a cooling passage of rotating gas-turbine blades. The rotating duct has staggered ribs with $70^{\circ}$ attack angle, which are attached on leading and trailing surfaces. Naphthalene sublimation technique is employed to determine detailed local heat transfer coefficients using the heat and mass transfer analogy. Additional numerical calculations are conducted to analyze the flow patterns in the cooling passage. The present experiments employ two-surface heating conditions in the rotating duct because the exposed surfaces to hot gas stream are pressure and suction side surfaces in the middle passages of an actual gas-turbine blade. Secondary flows are generated by Coriolis and centrifugal forces in the spanwise and streamwise directions. The ribs attached on the walls disturb the mainflow resulting in recirculation and secondary flows near the ribbed wall. The local heat transfer and flow patterns in the passage are changed significantly according to rib configurations and duct rotation speeds. Therefore, the geometry and arrangement of the ribs are important for the advantageous cooling performance. The experimental results show that the ribs enhance the heat transfer more than $70\%$ from that of the smooth duct. The duct rotation generates the heat transfer discrepancy between the leading and trailing walls due to the secondary flows induced by the Coriolis force. The overal heat transfer pattern on the leading and trailing walls for the first and second passes are depended on the rotating speed, but the local heat transfer trend is affected mainly by the rib arrangements.

• 대한치과교정학회지
• /
• 제43권5호
• /
• pp.218-224
• /
• 2013

Objective: To examine the effect of bite force on the displacement and stress distribution of orthodontic mini-implants (OMIs) in the molar region according to placement site, insertion angle, and loading direction. Methods: Five finite element models were created using micro-computed tomography (microCT) images of the maxilla and mandible. OMIs were placed at one maxillary and two mandibular positions: between the maxillary second premolar and first molar, between the mandibular second premolar and first molar, and between the mandibular first and second molars. The OMIs were inserted at angles of $45^{\circ}$ and $90^{\circ}$ to the buccal surface of the cortical bone. A bite force of 25 kg was applied to the 10 occlusal contact points of the second premolar, first molar, and second molar. The loading directions were $0^{\circ}$, $5^{\circ}$, and $10^{\circ}$ to the long axis of the tooth. Results: With regard to placement site, the displacement and stress were greatest for the OMI placed between the mandibular first molar and second molar, and smallest for the OMI placed between the maxillary second premolar and first molar. In the mandibular molar region, the angled OMI showed slightly less displacement than the OMI placed at $90^{\circ}$. The maximum Von Mises stress increased with the inclination of the loading direction. Conclusions: These results suggest that placement of OMIs between the second premolar and first molar at $45^{\circ}$ to the cortical bone reduces the effect of bite force on OMIs.

• 한국결정성장학회지
• /
• 제6권2호
• /
• pp.185-193
• /
• 1996

(100) Si wafer를 $2.5^{\circ},\;5^{\circ}$ 기울인 뒤, dry $O_{2}$ 분위기에서 산화시킴으로써, 시편들 간의 산화 거동 및 산화에 의한 적층 결함 특성의 차이를 알아보았다. 시편을 $900~1200^{\circ}C$에서 산화시키고 ellipsometer로 두께를 측정한 결과 저탈각 (100) Si이 (100) Si보다 산화 속도가 빨랐으며, $5^{\circ}$ off면이 $2.5^{\circ}$ off면보다 더 빨랐다. 결정방향에 따른 산화속도 차이는 산화 온도가 높아질수록 줄어들었다. 각 시편의 속도 상수에 대한 활성화 에너지는 포물 성장 속도 상수의 경우 (100) Si, $2.5^{\circ}$ off (100) Si, $5^{\circ}$ off Si이 각각 27.3, 25.9, 27.6 kcal/mol이였고, 선형 성장 속도 상수는 58.6, 56.6, 57.4 kcal/mol이였다. 또한, 두 시편에 대해 산화막을 선택 식각하 고 광학 현미경으로 관찰하여, (100) Si에 비해 $5^{\circ}$ off된 면의 산화에 의한 적층 결함 밀도가 훨씬 낮음을 확인하였고, 적층 결함 간의 각도가 달라짐을 확인하였다.

• 대한전자공학회논문지SD
• /
• 제46권4호
• /
• pp.45-52
• /
• 2009

본 연구를 통해서 대 면적, 고 휘도 AMOLED 응용에 적합한 화소 회로와 이에 대한 구동 방식을 제안하였다. 균일도는 다소 떨어지지만 안정성이 뛰어난 저온 다결정 실리론(LTPS) 박막 트랜지스터(TFT)를 기반으로 설계했다. 영상 화소의 균일도를 향상시키기 위해, 화소 TFT의 $V_{TH}$와 이동도 편차를 함께 보상할 수 있도록 했다. 기존의 이동도 보상 회로가 갖는 문제점을 극복하여 대 면적 패널에 적합하도록 했고, 동영상 특성을 개선하기 위해 black data insertion 방식을 도입하였다. 이동도 보상 시 휘도가 떨어지는 문제를 개선하기 위해, 패널이 두 가지 보상 모드에서 동작할 수 있도록 하였다. 화소 회로를 제어하기 위한 스캔 구동 회로를 최적화하여, 이를 통해서 보정 모드를 쉽게 제어할 수 있었다. 최종 구동 타이밍은 여유 있는 마진으로 안정적인 동작이 가능하다. 14.1" WXGA top emission AMOLED 패널에 대해 설계했으며, 이동도 보상 시간을 1us로 했을 때 패널의 불균일도는 5% 이하로 예측되었다.

• 대한전자공학회논문지
• /
• 제18권5호
• /
• pp.35-45
• /
• 1981

직각 쐐기는 유전체에 평면 전자파가 입사할때 일어나는 산란파에 대한 점근해를 구하였다. 산란파는 유전체경계면으로부터 반사된 파 및 고절된 파와 유전체 끝 모서리로부터 회석된 도간면파로 구성하였다. 모서리에서 회절된 전제는 물리광학 근사법에 의한 해에 교정항을 더하여 구하였으며, 이 교정 전계는 수치 계산에 의하여 풀 수 있는 이중 급수 방정식으로부터 구하였다. 구해진 점근해의 유효성은 유전체의 상대 유전률 ε의 값이 -에 갈때와 1에 가까운 값을 가질때의 두 극한치에서 검토 되었다. ε이 작을때는 Rawlins이 구한 ε Neumann계수해의 계산 결과와 같았으며, ε이 ∞에 접근할때 모서리의 회절 패턴은 도체 모서리의 회절패턴에 접근함을 보일 수 있다.

• 한국의류산업학회지
• /
• 제20권4호
• /
• pp.429-438
• /
• 2018

This study analyzed the fit-zone of the neck for females in their 60s. We considered the standard body types of females in their 60s and the four body types from the sixth Size Korea. The results of the study were as follows. We could not determine a pattern formula for the neck based on the changes in the body type of females in their 60s. However, the position of the lateral neck point generally showed a significant difference from that of females in their 20s. In the case of the shoulder angle, the point of the shoulder was angled slightly towards the back in all body types. It was also found that the curve of the neck circumference for both the collar and the bodice should have been smoother than what was shown on the 3D shape. The larger the height difference between the point of the back of the neck and the lateral neck point in the 3D shape, the smoother the design should be at the curve of the circumference at the front of the neck. A larger curvature in the front radius of the 3D shape increased the difference in the shape of the curve between the collar and the basic pattern of the bodice. Hence, a more careful design is required for these parts of the pattern. In addition, the more the front neck is bent, the smoother the circumference curve should be in the pattern design at the front of the neck and the collar.

• 대한기계학회논문집B
• /
• 제21권11호
• /
• pp.1485-1495
• /
• 1997

The present study investigates heat/mass transfer around film cooling jets and circular cylinders to compare the characteristics of each other. Experiments are conducted to obtain the detailed heat/mass transfer coefficients of flat plate with injections through an array of holes and for flows around an array of protruding circular cylinders using the naphthalene sublimation technique. The inclination angles of cylinders are set to the same ones of jets; a, the angle between the jet and the surface is fixed at 30 deg. through the whole experiments and .betha., the angle between the projection of the jet on the surface and the direction of main stream is adjusted to 0 deg., 45 deg. and 90 deg. to investigate the effect of variation of injection angles. The influence of blowing rates of jets and those of cylinder length to diameter ratios are also investigated. The results indicate that the increase of angle .betha. influences the spanwise uniformity of heat/mass transfer remarkably for both jets and cylinders, but that variation of cylinder length to diameter ratios has weaker effects on heat/mass transfer coefficients than that of blowing rates.