• Korean Journal of Applied Biomechanics
• /
• v.21 no.5
• /
• pp.631-638
• /
• 2011

This study had two purposes. The first was to analyze the period of the final record set by the male shot-putters in the IAAF World Championships, Daegu 2011 from the point of view of kinematics. The other was to identify an efficient movement for shot putting based on the analysis. The research used the eight finalists of in the championship as subjects. We analyzed the seven most important kinematic factors in shot putting based on the type of technique: the execution time of the delivery phase, release velocity, release angle, release, center of mass (COM) velocity, and shot trajectories. The analytical results showed the following average figures for the record 12 meters: execution time of the delivery phase: (0.19 s), release height: (2.06 m), release angle: ($34.68^{\circ}$), release velocity: (13.25 m/s), angular velocity of shoulder: ($922.38^{\circ}/s$), and angular velocity of pelvis: ($479.50^{\circ}/s$). Further, the results showed that the highest COM velocity was 2.25 m/s and the shot trajectories were close to a straight line in the release phase.

• Korean Journal of Applied Biomechanics
• /
• v.21 no.5
• /
• pp.645-652
• /
• 2011

The purpose of this study was to analyze, in real time, the glide motion and release motion of domestic athletes and gold and bronze medalists employing the glide technique for the men's shot put at the Daegu World Athletic Championship in 2011. In the glide motion, the Korean athletes had a relatively high body center and shot put heights and lager stretching angles for their hips and knees. In the delivery phase, which shifts to the release phase, the Korean athletes showed slower vertical body center and shot put speeds, and they changed the phase, to the release phase by using a small body angle. In the release phase, the Korean athletes showed differences in their projection speeds and vertical body center speeds. The world-famous players showed high angle speeds, which refer to the composition of the rotation force at the moment of release (body, hip, and shoulder line). In the release phase, the Korean athletes did not have fully stretched hip and knee angles, which might have negatively influenced the vertical speed. Because the Korean athletes showed relatively low projection heights and projection angles. it was found that they need to enhance the muscular power of their, throwing arms and lower limbs.

• Physical Therapy Korea
• /
• v.19 no.2
• /
• pp.12-19
• /
• 2012

The purpose of this study was to assess the influence of scapular alignment on the electromyographic (EMG) activity of the trapezius in people with a short pectoralis minor muscle. For the study, we recruited 15 volunteers who had positive results for short on a pectoralis minor muscle length test. We measured the EMG activity of the upper, middle and lower trapezius muscles. The participants lifted their dominant arm to ear level with the thumb up toward the ceiling in the prone position on a table with the shoulder at a flexion angle of 180 degrees and a horizontal abduction angle of 120 degrees. Scapula was manually aligned by an experienced physical therapist prior to arm lift for the scapular alignment condition. A paired t-test was used to compare the effects of scapular alignment on the EMG activity of the trapezius muscles. The EMG activity of the lower trapezius muscle was significantly increased during the test with the scapular alignment compared to that without scapular alignment (p<.05), while the upper trapezius and middle trapezius exhibited no significant difference between the two conditions (p>.05). The findings of this study suggest that a scapular alignment may alter the recruitment of the lower trapezius muscle during arm lifting in the prone position in people with a short pectoralis minor muscle.

• Korean Journal of Applied Biomechanics
• /
• v.13 no.1
• /
• pp.155-171
• /
• 2003

The purpose of this study was to analyze the kinematic variables of over head kick(OHK) in soccer with three dimensional analysis technique and show the kinematic characteristics of it. The 7 subjects were university football player who have been playing football more than 7 years. The OHK was filmed on 16mm video camera(30frame/sec.) kinematic variables were temporal, postures, and COG(center of gravity). The mean values and the standard deviation for each variables were obtained and used as basic factors for examining characteristics of OHK. The results of this analysis were as follows : Temporal variables : The total time elapsed(TE) of OHK was $0.95{\sim}1.14sec$, the 1st phase was 0.35sec., 2nd phase was 0.46sec., and 3rd phase was 0.22sec.. Posture variables : When subjects performed OHK at the impact event, the ankle and knee angle of kicking foot were more extend than supporting foot. but the hip angle of supporting foot were more extend than kirking foot. Moving distance of the center of mass of the both foot. When subject performed OHK at the impact event, the range of distance on mediolateral direction aspect into right left shoulder line, anteroposterior direction aspect was $20.9{\pm}10.5cm$, vertical direction aspect was $92.3{\pm}19.9cm$. Angular velocity : the faster angular velocity of knee ankle on the kicking foot pew form jump position to landing position, the faster velocity of ball became. C. O. G. variables. When subject performed OHK at the impact event, upper part of the body was getting lower, lower part of the body was getting higher.

• Journal of Fashion Business
• /
• v.12 no.3
• /
• pp.31-53
• /
• 2008

This study is to suggest a brassiere pattern suitable to the Chinese woman by recognizing the differences among the brassiere patterns of Europe, America and Italy by comparison. Collected data was analyzed by using SPSS 12.0. 1. If seeing the length of the ordinary brassiere's wing in Korea, the mean is 31.02cm to be shorter than these 3 patterns. The length of a wing should be adjusted according to the degree of fabric's elasticity. 2. The ESMOD type shows a high angle of $60^{\circ}$ as the position of a shoulder strip is placed outward a lot compared with other patterns. 3. For the FIT and Marangoni types, the lengths of the inside and the external diameters show similarly to each other but the ESMOD type shows that its inside diameter is 7.5cm and external one is 9.6cm to have the difference of 2.1cm so that it is considered to put the bust together stronger than the others. 4. The cup circumference of the FIT pattern shows to be the biggest and that of the FIT pattern is the smallest. As the FIT pattern has the shape to wrap the side of the bust, it has large circumference but as it has a narrow angle of a dart, it seems to be fit to the woman with a small and flat bust. 5. For 1/2 of the nipple distance of the brassiere for the Korean adult women, it shows to be 6.12cm, much narrower than the patterns studied, and it is noticed that the ESMOD pattern is very similar to the brassier in the Korean market. 6. As the mean keeper height is 6.5cm, it is noticed that it is very similar to the brassier for the Korean adult women if comparing that the brassiere for the Korean adult has the keeper height of 6.5-8.6cm. The Marangoni pattern tends to have a little low and the ESMOD and FIT patterns have a ordinary measure.

• Korean Journal of Applied Biomechanics
• /
• v.14 no.1
• /
• pp.27-40
• /
• 2004

The purpose of this study was to provide basic data for improving athletic performances by analyzing the kinematic variables of the Double Backward Somersault on the Parallel Bars through the 3D motion analysis. The subjects in this study were 5 male gymnasts who were ranked as national athletes. The results are as follows. 1. A total time(Mean Time) of performance showed $2.72{\pm}0.82\;sec$. and flight time to landing after releasing was 0.87sec.(mean). In order to perform better stable flying movement, the flight time should be increased. 2. In the change of velocity of the center of mass, when the increasing ascension velocity of the upper point was high, the position in the top point was high on releasing. 3. In the position variable of the center of mass, the mean of upper-bottom position in horizontal posture was $242.1{\pm}6.5cm$, $232.8{\pm}6.4cm$ in releasing, and $265.0{\pm}5.6cm$ in the highest point. This result is explained that the position of center of mass can be raised by using elastic power when wrist raised the bar in the releasing movement. 4. The angle of shoulder joint was $271.1{\pm}14.0$. Such a big angle influences a negative effect on the releasing velocity, because trunk is not a position in the enough vertical direction. 5. The ankle of hip joint in hand-standing was $191.1{\pm}5.9$, $118.8{\pm}5.3$ in releasing, and $122.3{\pm}5.3$ in taking on. Therefore, the result suggests that trunk should be straightly raised in taking on.

• Korean Journal of Applied Biomechanics
• /
• v.23 no.3
• /
• pp.209-218
• /
• 2013

This study was to perform the kinetic analysis of forward $1\frac{1}{2}$ somersault on the platform diving. Six men's diving players of the Korea national reserve athletes participated in this study. The variables were analyzed response time, velocity, center of mass (COM), angle, center of pressure (COP) and ground reaction force (GRF) of motion. For measure and analysis of this study, used to synchronized to 4 camcorder and 1 force plate, used to the Kwon3D XP (Ver. 4.0, Visol, Korea) and Kwon GRF (Ver. 2.0, Visol, Korea) for analyzed of variables. The results were as follows; Time factor were observed in maximum knee flexion depending on the extent of use at phase 1 of take-off to execute the somersault. This enabled the subject to secure the highest possible body position in space at the moment of jumping to execute the somersault and prepare for the entry into the water with more ease. Regarding the displacement of COM, all subjects showed rightward movement in the lateral displacement during technical execution. Changes in forward and downward movements were observed in the horizontal and vertical displacements, respectively. In terms of angular shift, the shoulder joint angle tended to decrease on average, and the elbow joints showed gradually increasing angles. This finding can be explained by the shift of the coordinate points of body segments around the rotational axis in order to execute the half-bending movement that can be implemented by pulling the lower limb segments toward the trunk using the upper limb segments. The hip joint angles gradually decreased; this accelerated the rotational movement by narrowing the distance to the trunk. Movement-specific shifts in the COP occurred in the front of and vertical directions. Regarding the changes in GRF, which is influenced by the strong compressive load exerted by the supporting feet, efficient aerial movements were executed through a vertical jump, with no energy lost to the lateral GRF.

• Journal of the Ergonomics Society of Korea
• /
• v.30 no.2
• /
• pp.339-347
• /
• 2011

Objective: The purpose of this study was to evaluate of various material of pillows by using biomechanical variables such as the cervical stability, head pressure distribution, and muscle activity. Method: Eight subjects participated in the experiment. Three different materials such as polyester sponge, memory foam and the buckwheat shell used for Korean traditional pillow were tested. Electro-goniometer, six channels of electromyography(EMG), ten channels of the head pressure sensors were used to measure the biomechanical responses. Surface electrodes were attached to the right/left semispinals capitis(RSC, LSC), the right/left sternocleidomastoid(RSM, LSM), the right/left upper trapezius(RUT, LUT). The cervical stability was evaluated by the angle deviated from the standing neck position. The head pressure distribution was evaluated by the pressure per unit area recorded on the sensors and the intensity of peak pressure. Electromyography(EMG) data were analyzed by using root mean square(RMS) and mean power frequency(MPF). Results: The buckwheat shell material showed a higher stability in the cervical spine then the other pillows during spine position. In terms of head pressure distribution, the memory form indicated the lowest pressure at supine position, buckwheat shell material indicated the lowest pressure during lying down to side, and polyester cushion recorded the highest pressure at all postures. Conclusion: The buckwheat shell material has a biomechanical advantage to maintain a healthy neck angle and reduce the pressure on the head, which means the buckwheat shell is a potential material for ergonomic pillow design. The pillow with memory form showed second best biomechanical performance in this study. Application: The shape of the buckwheat shell pillow and the characteristics of materials can be used to design the pillow preventing neck pain and cervical disk problems.

• Physical Therapy Rehabilitation Science
• /
• v.6 no.2
• /
• pp.83-89
• /
• 2017

Objective: Computers and smartphones have become a necessity for modern people, and the use of these things in an inappropriate position has increased the number of people who complain about neck problems. The purpose of this study was to compare the changes of cervical angle, range of motion (ROM) and pain threshold according to the McKenzie stretching and dry cupping therapy. Design: Cross-over design. Methods: We included 12 male and 6 female college students in their twenties, and conducted a pre- and post-test to evaluate the changes of each variable after the application of the McKenzie stretching and dry cupping therapy. Results: Neither the cervical spine angle nor the turtle neck angle showed any change in both the McKenzie stretching and the dry cupping treatment. In the McKenzie stretching, the pain threshold decreased, and the ROM of the cervical spine increased in all directions but there was no significant difference. The pain threshold was increased in the dry cupping treatment, and the ROM of the cervical spine was significantly increased in all directions (p<0.05). Comparisons of the McKenzie stretching and cupping treatment showed that the cupping treatment produced significantly greater pain thresholds and improvements in ROM of the cervical spine than the McKenzie stretching technique (p<0.05). Conclusions: Cupping treatment is more effective in improving ROM of the cervical spine and pain thresholds than the McKenzie stretching technique. In the future, cupping treatment will be one of the treatment options for pain and ROM impairments of the cervical spine.

• The Journal of Korean Physical Therapy
• /
• v.29 no.4
• /
• pp.223-226
• /
• 2017

Purpose: This study examined two trunk strategies - medio-lateral ramp and anterior-posterior ram - and their effects on pelvis and trunk movements, providing basic material for safe ramp utilization. Methods: The present study included 20 asymptomatic males recruited from a local university. Participants were asked to stand with their feet shoulder-width apart. Their dorsal side faced the camera, and measurements were performed while standing in a neutral double stance, one leg stance, $15^{\circ}$ of medial and lateral ramp, and $15^{\circ}$ of anterior and posterior ramp. Participants were allowed to practice for 3 minutes, and each participant had a 30 seconds rest between the two ramp conditions. One-way repeated measures analysis of variance was used to determine the effects the ramp conditions on spinal alignment. In all analyses, p<0.05 was used to indicate statistical significance. Results: The trunk-inclination angle on the posterior ramp was significantly lower than that of the double stance position (p<0.05). The trunk imbalance angle was significantly higher on the medial ramp, than that on the double stance position (p<0.05). The pelvic position and pelvic torsion angles were significantly higher in the medial, lateral, and anterior ramp positions than that of the double stance position (p<0.05). The pelvic rotation angles on the medial, lateral, and anterior ramps were significantly lower than that of the double stance position (p<0.05). Conclusion: These findings suggest that when people are exposed to the same form of ramp for an extended period, posture modifications may be triggered.