• Journal of Biosystems Engineering
• /
• 제30권6호통권113호
• /
• pp.347-353
• /
• 2005

Paper angle, environment friendly packaging material, has been mainly used as an edge protector, But, in the future, paper angle will be applied to package design of heavy product such as strength reinforcement or unit load system (ULS). Therefore. understanding of buckling behavior fur angle itself, compression strength and quality standard are required. The objectives of this study were to characterize the buckling behavior by theoretical and finite element analysis, and to develop compression strength model by compression test for symetric and asymetric paper angle. Based on the result of theoretical and finite element analysis, as applied load level was bigger and/or the length of angle was longer, incresing rate of buckling of asymmetric paper angle was higher than that of symmetric paper angle. Decreasing rate of minimum principal moment of inertia significantly increased as the extent of asymmetric angle increased, and buckling orientation of angle was open- direction near the small web. Incresing rate of maximum compression strength (MCS) for thickness of angle decreased as the web size increased in symmetric angle. MCS of asymmetric angle of 43${\times}$57 and 33${\times}$67 decreased $15{\~}18\%$ and $65{\~}78\%$, and change of buckling increased $12{\~}13\%$ and $62{\~}66\%$, respectively.

• 한국포장학회지
• /
• 제11권1호
• /
• pp.1-10
• /
• 2005

Paper angle, environment friendly packaging material, has been mainly used as an edge protector. But, we have perceived its application to package design of heavy product such as strength reinforcement or unit load system (ULS) in the future. Above all, understanding of buckling behavior for angle itself and compression strength and quality standard have to be accomplished for the paper angle to be used for this purpose. The purpose of this study was to elucidate the buckling behavior through theoretical and finite element analysis, and to develop compression strength model by compression test for symetric and asymetric paper angle. Based on the result of theoretical and finite element analysis, increasing rate of buckling of asymmetric paper angle was higher as applied load level was bigger and/or the length of angle was longer than that of symmetric paper angle. Decreasing rate of minimum principal moment of inertia was remarkably increased as the extent of asymmetric angle is bigger, and buckling orientation of angle was open direction near the small web. Increasing rate of maximum compression strength (MCS) for thickness of angle was smaller as the web size was bigger in symmetric angle. MCS of asymmetric angle of $43{\times}57$ and $33{\times}67$ was decreased $15{\sim}18%$ and $65{\sim}78%$, and change of buckling was increased $12{\sim}13%$ and $62{\sim}66%$, respectively.

• 콘크리트학회논문집
• /
• 제16권5호
• /
• pp.719-724
• /
• 2004

The ribs of deformed bars can split the cover concrete by wedging action or shear off the concrete in front of the ribs. As slip of deformed bars increases, the rib face angle is flattened by the crushed concrete wedge, which reduces the rib face angle to a smaller bearing angle. The roles of bearing angle are explored to simulate this observation. Analytical expressions to determine bond strength for splitting and pullout failure are derived, where the bearing angle is a key variable. As the bearing angle is reduced, splitting strength decreases and shearing strength increases. When splitting strength becomes larger than shearing strength, the concrete key is supposed to be sheared off and the bearing angle is reduced with decreasing the splitting strength. As bars slip, bearing angle decreases continually so that splitting bond strength is maintained to be less than shearing bond strength. The bearing angle is found to play a key role in controlling the bond failure and determination of bond strength of ribbed reinforcing steel in concrete structures.

• 한국분무공학회지
• /
• 제11권4호
• /
• pp.244-250
• /
• 2006

Of the macroscopic spray characteristics of non-reacting diesel fuel sprays, the spray angle reflects directly the atomization and air entrainment processes downstream the nozzle. In addition, spray angle is important because it will be closely related to the spray penetration. The existing definitions for the measurement of spray angle as well as the correlations for the prediction of spray angle are, therefore, summarized and reviewed. The existing definition of spray angle can be classified into four groups: distance based on orifice diameter, distance based on spray tip penetration, definition based on surface wave, and definition based on atomization. It is strongly required to specify the definition and measurement method when the data for spray angle is reported. The existing correlations for spray angle can be classified into two groups: theoretical and empirical correlations. The study on the evaluation of the existing correlations fer spray angle is required.

• Journal of the Optical Society of Korea
• /
• 제20권1호
• /
• pp.156-164
• /
• 2016

We demonstrated the pretilt angle effect on the viewing angle properties of a single-domain fringe-field switching (FFS) liquid crystal (LC) mode. By performing the Póincare sphere analysis, we investigated, in detail, the origin of the viewing angle asymmetry that exists in the single-domain FFS LC mode both in the field-on and field-off states. Using this analysis, we confirmed that the pretilt angle reduces the viewing angle symmetry in the single-domain FFS LC mode. Finally, we examined the effect of a zero pretilt angle on the viewing angle symmetry by evaluating real single-domain FFS LC cells.

• 대한정형도수물리치료학회지
• /
• 제17권2호
• /
• pp.57-63
• /
• 2011

Background: To investigate the effect of various intervention application on idiopathic scoliosis patient. Methods: One 20-years-old female subject underwent various intervention 3 times per week for 7 weeks. Modality physical therapy, muscle energy technique, combined pelvic tilt exercise and self exercise was performed for 50minutes. Degree of pain, axial trunk rotation, Cobb's angle, kyphotic angle, lumbar lordotic angle, and sacral angle were measured. Results: The subject decreased in degree of pan, axial trunk rotation, Cobb's angle, thoracic kyphotic angle, lumbar lordotic angle and sacral angle. Conclusions: The various interventions for scoliosis patients are effective in the pain and the improvement of angle on radiograph. However, any method is difficult to determine effective interventions.

• 대한치과교정학회지
• /
• 제27권5호
• /
• pp.723-732
• /
• 1997

본 연구의 목적은 악안면유형에 따라 측모 연조직 양상에 차이가 있는지를 알아보고자 17세 이상의 연령을 가진 다양한 수직적 양상을 보이는 II급 및 III급 남,녀 79명을 선택하여 각 계측치를 계측하고 통계 처리하여 다음과 같은 결과를 얻었다. 1. Nasolabial angle, interlabial angle, lower lip angle, mentolabial angle, symphyseal angle이 골격성 II급군과 III급군간에 유의한 차이를 보였고, nasofrontal angle, upper lip angle, mentolabial angle, symphyseal angle이 high angle군과 low angle군간에 유의한 차이를 보였다. 2. 악골의 시상적관계를 나타내는 ANB값이 연조직의 nasolabial angle, symphyseal angle, interlabial angle과 정상관 관계를 보였고, lower lip angle과는 역상관 관계를 보였다. 3. 악골의 수직적관계를 나타내는 SN-GoMe값은 연조직의 mentolabial angle, symphyseal angle, nasofrontal angle, upper lip angle과 정상관 관계를 보였다. 4. 골격성 III급군에 비해 II급군에서 SN-GoMe값에 따른 측모연조직 양상의 차이가 현저하였다.

• 한국전문물리치료학회지
• /
• 제6권1호
• /
• pp.1-14
• /
• 1999

The quadriceps angle (Q angle) has been used to reflect the quadriceps muscle's force on the patella in the frontal plane. Previous investigations of the Q angle and it's relationship to knee disorders have yield equivocal results. The purpose of this study was to analyze the factors related to the Q angle and it's relation to other variables such as leg length, body weight, CTA (calcaneus to tibia angle), TOA (toe out angle), and pelvic width in normal subjects. The participants were 60 students (30 men and 30 women) who had no orthopedic and neurological impairments, aged from 20 to 29 years of age, with an average age of 22.1 years. Prior to participation, each subject was informed of the procedures of the experiment from a researcher and assistant researchers. The equipment used in this study were modified standard goniometer, ruler, marking pen, and Martin apparatus for pelvic width. In order to determine the statistical significance of the experiment, regression analysis, independent t-test, and Pearson correlation were used at the 0.05 level. The results were as follows: 1) It was found that the Q angle of women is greater than that of men's from both knees. 2) There was no significant difference between right and left quadriceps angle. 3) The Q angle decreased as the body weight (leg length) shifted from low to high. 4) It seems that factors related to the Q angle were body weight, CTA, and pelvic width, but there was no significant difference at the 0.05 level.

• 대한치과교정학회지
• /
• 제15권2호
• /
• pp.175-195
• /
• 1985

Vertical and horizontal growth occur in the craniofacial complex which ensues continuous changes in facial morphology, until the end of active growth period. Longitudinal study for individual is essential, in the research on growth and development, however, the difficulties in obtaining long term subjects in Korea, the research has been limited. The author analyzed the cephalometric roentgenogrems of 43 boys and 47 girls taken from the ages 6 to 10. The subjects were divided into 3 groups according to SN-MP angle and 2 groups according to gonial angle. In this longitudinal study, 21 variables were measure 4. The obtained results were as follows: 1. SN-MP angle and genial angle had no significant changes in each group with age. 2. With age, facial convexity of hard tissue decreased in all groups, facial angle of hard tissue increased in low SN-MP angle group, but facial convexity of soft tissue had no significant changes in all groups with age. 3. In comparison of high SN-MP angle group and low SN-MP angle group, the former had greater facial convexity and smaller facial angle than the latter. 4. SN-MP angle and the ratio of posterior dental height to anterior dental height had reverse correlation in all groups. 5. High genial angle group revealed larger SN-MP angle, anterior dental height facial convexity, but smaller mandibular length, and the ratio of posterior dental height to anterior dental height compared with low genial angle group.

• 한국의류학회지
• /
• 제12권1호
• /
• pp.45-52
• /
• 1988

To classify the foot type, direct measurements, metatarso-phalanx angle and foot print angle of the right and left foot were measured and analyzed. The results are as follows. 1. The correlation coefficients between right and left foot were high degree, and except medial malleous height, the diffences between right and left foot are not significant. 2. The correlation coefficient among direct measurements of the foot are high degree, tut the correlation coefficients between direct measurements and metatarso-phalanx angle and foot print angle are no or low degree. Therefore, to recognize the foot type, the direct measurements, metatarso-phalanx angle and foot print angle need to be measured independently. 3. According to foot width/foot $length{\times}100$ which is the slender degree of foot, three groups are distinguished: one is slender type of which foot width/foot $length{\times}100$ is less than $40.14\%$, two is standard type of which foot width/foot $length{\times}100$ is $40.14\%{\~}44.30\%$, three is broad type of which foot width/foot $length{\times}100$ is more than $44.30\%$. 4. On the photographs metatarso-phalanx angle was measured, and two groups are distinguished: one is normal type of which the metatarso-phalanx angle is more than $160^{\circ}$ and the other is the deformed type of which the metatarso-Phalanx angle is less than $159^{\circ}$. 5. By foot print angle $30^{\circ}$ which need reformation of the foot, two groups are distinguished: one is normal foot print angle of which the angle is more than $30^{\circ}$ and the other is flat foot print angle of which the angle is less than $30^{\circ}$. 6. Classifications by foot width/foot $length{\times}100$, metatarso-Phalanx angle and foot Print angle are put together, and then foot types are classified into 12 groups such as Table 11.