• International Journal of Internet, Broadcasting and Communication
• /
• v.15 no.2
• /
• pp.168-174
• /
• 2023

In the current world, with the massive scale of SOC construction, it is difficult to diagnose and check all of a bridge's abnormal states with even the experts' eyes for maintenance. It is because we should spend huge costs and time on maintenance. Still, there are not many alternative ways to inspect bridges remotely regarding accuracy or reality. Therefore, we remark on the advantages and disadvantages of previous methods through practices in SOC maintenance. To inspect the abnormal state of the Bridge, we suggest inspecting bridges with an Augmented Reality (AR) mechanism to reduce cost, human resource consumption, and the risk of work. Through the proposed approach, we expect that it provides ways to solve massive construction problems with software-based technologies.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2014.04a
• /
• pp.666-671
• /
• 2014

To reduce the exterior noise level of EMU, there are several ways have been evaluated. The noise sources for the exterior noise level are the traction motor, driving gear and wheel/rail rolling noise. In this article, the ways to mitigate the noise issue for EMU have been investigated and especially the way to protect the noise radiation from the bogie area and wheel/rail rolling noise. The way to evaluate the effect of the side skirt has been reviewed. To install the side skirt, the interface between the side skirt and the carbody and bogie should be examined and the acoustic design of the side skirt will be evaluated.

• The Mathematical Education
• /
• v.57 no.2
• /
• pp.157-177
• /
• 2018

The students in secondary schools have been taught calculus as an important subject in mathematics. The order of chapters-the limit of a sequence followed by limit of a function, and differentiation and integration- is because the limit of a function and the limit of a sequence are required as prerequisites of differentiation and integration. Specifically, the limit of a sequence is used to define definite integral as the limit of the Riemann Sum. However, many researchers identified that students had difficulty in understanding the concept of definite integral defined as the limit of the Riemann Sum. Consequently, they suggested alternative ways to introduce definite integral. Based on these researches, the definition of definite integral in the 2015-Revised Curriculum is not a concept of the limit of the Riemann Sum, which was the definition of definite integral in the previous curriculum, but "F(b)-F(a)" for an indefinite integral F(x) of a function f(x) and real numbers a and b. This change gives rise to differences among ways of introducing definite integral and explaining the relationship between definite integral and area in each textbook. As a result of this study, we have identified that there are a variety of ways of introducing definite integral in each textbook and that ways of explaining the relationship between definite integral and area are affected by ways of introducing definite integral. We expect that this change can reduce the difficulties students face when learning the concept of definite integral.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2003.06a
• /
• pp.1150-1153
• /
• 2003

Recently, Many studies have been undergoing to reduce a working time in a field of machine tool. There are two ways of reducing working time; to reduce actual working time by heighten spindle speed and to reduce stand-by time by shortening tool exchange time. Automatic tool change system belongs to the latter case. Fixed address type automatic tool change system that is being developed in this study can store more number of tool in small space than magazine transfer type automatic tool changer as well as shorten tool exchange time. In this paper, a simplified equivalent model of finite element method in order to analyze frame structure of fixed address type automatic tool change system is presented.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2002.10a
• /
• pp.1015-1018
• /
• 2002

Recently, many studies have been undergoing to reduce a working time in a field of machine tool. There are two ways of reducing a working time; to reduce an actual working time by heighten a speed of spindle and to reduce a stand-by time by shortening a tool exchanging time. ATC(Automatic Tool changer) belongs to the latter case. Fixed address type ATC that is being developed ill this study can store more number of tool in small space than magazine transfer type ATC relatively as well as shorten tool exchanging time. In this study, a simplified equivalent model of finite element method in order to analyze structure of fixed address type ATC.

• Journal of Plant Biology
• /
• v.28 no.1
• /
• pp.69-77
• /
• 1985

The degree of The degree of The degree of ${Zn}^{2+}$ effect on the photosynthetic electron transport and photophosphorylation activities in barley chloroplasts has been tested.${Zn}^{2+}$treatment was done in the 2 ways. One was that it was added into the chloroplasts suspensions isolated from the plants grown under the normal ${Zn}^{2+}$level (10$^{-6}$ M). The other was that the different concentrations of ${Zn}^{2+}$was applied in each growth medium. Then, it was not added into the chloroplasts suspensions isolated from the plants. PS II activity in both way of the treatments was more severely inhibited than PS I by the increment of ${Zn}^{2+}$ concentration. The photophosphorylation activity measured by pH measurement was gradually decreased with the increase of ${Zn}^{2+}$concentration in both ways, too. However, it was shown that M $n^{2+}$ could be near fully overcome the inhibitory effect of ${Zn}^{2+}$in PS II, and $Mg^{2+}$ could also reduce the Z $n^{2+}$ inhibition in the photophosphorylation. In the low concentrations of $Mg^{2+}$ (3 to 5$\times$10$^{-3}$ M) in the suspension, ${Zn}^{2+}$(2$\times$10$^{-5}$ M) could increase the activity of photophosphorylation. As compares to other cations, Z $n^{2+}$ caused less inhibitory effect on the photophosphorylation activity than Cu, Cd, but more than Pb and Ni. It may be assumed that a complex from reaction of Z $n^{2+}$ and mercaptoethanol was produced and it could reduce the stability of CPI band during SDS-PAGE.effect on the photosynthetic electron transport and photophosphorylation activities in barley chloroplasts has been tested. Z $n^{2+}$ treatment was done in the 2 ways. One was that it was added into the chloroplasts suspensions isolated from the plants grown under the normal Z $n^{2+}$ level (10$^{-6}$ M). The other was that the different concentrations of Z $n^{2+}$ was applied in each growth medium. Then, it was not added into the chloroplasts suspensions isolated from the plants. PS II activity in both way of the treatments was more severely inhibited than PS I by the increment of Z $n^{2+}$ concentration. The photophosphorylation activity measured by pH measurement was gradually decreased with the increase of Z $n^{2+}$ concentration in both ways, too. However, it was shown that M $n^{2+}$ could be near fully overcome the inhibitory effect of Z $n^{2+}$ in PS II, and $Mg^{2+}$ could also reduce the Z $n^{2+}$ inhibition in the photophosphorylation. In the low concentrations of $Mg^{2+}$ (3 to 5$\times$10$^{-3}$ M) in the suspension, Z $n^{2+}$ (2$\times$10$^{-5}$ M) could increase the activity of photophosphorylation. As compares to other cations, Z $n^{2+}$ caused less inhibitory effect on the photophosphorylation activity than Cu, Cd, but more than Pb and Ni. It may be assumed that a complex from reaction of Z $n^{2+}$ and mercaptoethanol was produced and it could reduce the stability of CPI band during SDS-PAGE.effect on the photosynthetic electron transport and photophosphorylation activities in barley chloroplasts has been tested. Z $n^{2+}$ treatment was done in the 2 ways. One was that it was added into the chloroplasts suspensions isolated from the plants grown under the normal Z $n^{2+}$ level (10$^{-6}$ M). The other was that the different concentrations of Z $n^{2+}$ was applied in each growth medium. Then, it was not added into the chloroplasts suspensions isolated from the plants. PS II activity in both way of the treatments was more severely inhibited than PS I by the increment of Z $n^{2+}$ concentration. The photophosphorylation activity measured by pH measurement was gradually decreased with the increase of Z $n^{2+}$ concentration in both ways, too. However, it was shown that M $n^{2+}$ could be near fully overcome the inhibitory effect of Z $n^{2+}$ in PS II, and $Mg^{2+}$ could also reduce the Z $n^{2+}$ inhibition in the photophosphorylation. In the low concentrations of $Mg^{2+}$ (3 to 5$\times$10$^{-3}$ M) in the suspension, Z $n^{2+}$ (2$\times$10$^{-5}$ M) could increase the activity of photophosphorylation. As compares to other cations, Z $n^{2+}$ caused less inhibitory effect on the photophosphorylation activity than Cu, Cd, but more than Pb and Ni. It may be assumed that a complex from reaction of Z $n^{2+}$ and mercaptoethanol was produced and it could reduce the stability of CPI band during SDS-PAGE.ld reduce the stability of CPI band during SDS-PAGE.

• Journal of The Institute of Information and Telecommunication Facilities Engineering
• /
• v.10 no.2
• /
• pp.74-79
• /
• 2011

The goal of this research is to reduce dynamic and static power consumption for a low power cache system. The proposed cache can achieve a low power consumption by using a drowsy and a way prediction mechanism. For reducing the static power, the drowsy technique is used at 4-way set associative cache. And for reducing the dynamic energy, one among four ways is selectively accessed on the basis of information in the Way-Line Prediction Unit (WLPU). This prediction mechanism does not introduce any additional delay though prediction misses are occurred. The WLPU can effectively reduce the performance overhead of the conventional drowsy caching by waking only a drowsy cache line and one way in advance. Our results show that the proposed cache can reduce the power consumption by about 40% compared with the 4-way drowsy cache.

• Proceedings of the Korea Society of Costume Conference
• /
• 2001.08a
• /
• pp.50-52
• /
• 2001

The main purpose of this study is to research ways for waste reduction in manufacturing, materials regeneration and clean production in apparel manufacturing in Taiwan, in order to achieve 3E: Efficiency, Economy and Environmental Protection. Specifically, this study hopes to address the following three areas: (1) To study the processing technologies which can turn apparel wastes to resources (2) To increase the efficiency in the use of energy and resources in apparel production (3) To establish a system for improving the recovery from unwanted apparel in Taiwan, in order to improve environmental protection and to reduce pollution.

• Proceedings of the KIPE Conference
• /
• 2003.07b
• /
• pp.520-523
• /
• 2003

In this paper, heatsink design for high power converter is presented. There are many ways of designing heatsink, but air cooling is by far the most used and much more practical than any of the other methods. In this paper, the practical methods of cooling which include the method to reduce a noise and a vibration due to a fan and the method to design a gap resistance and a contact resistance due to mounting force between thyristor and heatsink is proposed. Finally, simulation and experimental results are described to verify validity of the proposed method.

• International Journal of Computer Science & Network Security
• /
• v.24 no.1
• /
• pp.151-155
• /
• 2024

This project is designed with the aim to facilitate the farmer or gardener to engage in green house systems and to improve agricultural technology. In order to reduce continuous monitoring of the soil parameters, excess time consumption for the farmers and excessive usage of water, "Smart irrigation and temperature control for a greenhouse system" has been developed. There are two different ways to irrigate the land namely traditional irrigation methods and modern irrigation methods.