• 한국산학기술학회논문지
• /
• 제16권7호
• /
• pp.4828-4834
• /
• 2015

Action Time이란 탄이 공이가 뇌관을 격발한 순간부터 총구를 이탈할 때까지의 걸리는 시간을 말한다. 40mm 고속유탄은 장전되면서 격발되는 구조이므로 Action Time이 특정 시간 이내여야 탄피 고착과 같은 악작용을 방지 할 수 있다. 기존 40mm 고속유탄의 Action Time 계측은 신뢰성 있는 측정 장비의 부재로, 그동안 Action Time이 K4기관총 품질 보증에 적용되는 것에 어려움이 있었다. 본 연구에서는 다양한 센서 간 비교와 별도의 발사 장치 고안을 통해 정확한 Action Time을 측정하고자 하였다. 이 장치에서는 공이 부분에 설치된 광센서의 신호와 총열 부분에 설치된 와전류 탐촉자 신호 간 간격이 계측되고, 실시간으로 컴퓨터로 데이터가 전송되게 된다. 계측된 Action Time 결과가 시스템 요구 성능에 충족하는지 여부를 즉시 확인함으로써 40mm 고속유탄의 품질 보증에 중요한 역할을 할 것으로 기대된다.

• 한국근적외분광분석학회:학술대회논문집
• /
• 한국근적외분광분석학회 2001년도 NIR-2001
• /
• pp.1172-1172
• /
• 2001

Compact Near Infrared Diode Array Spectrometers offer new possibilities for on line quality assurance in the agricultural sector. Due to their speed and complete robustness towards temperature fluctuations and mechanical shock Diode Array Spectrometers are suitable for the use on Agricultural Harvest Machines. The growing consumer consciousness of food quality in combination with falling manufacturing prices demands procedures for an effective quality control system. The various conventional types of NIR instruments which have so far been used in laboratories are unsuitable for mobile applications under the rough conditions of field cropping not only because of their slow speed of measurement but also because of their shock sensitive filter wheels and monochromators necessary for fractionating polychromatic light. Another advantage of the on line use is the reduction of the sampling error because of the continuously measurement of the whole product. Considering the large economic importance of the dry matter content on agricultural products it is of particular advantage that water belongs to those constituents which are most easily assessed in the near infrared. While other constituents of economic importance such as starch, oil and protein in grains and seeds have a much lesser effect on NIR signals, their contents can nonetheless be assessed with high analytical precision on freshly harvested grains and seeds. In the last years several applications for on line quality assessment on harvesting machines were developed and tested. The talk will give an overview and outlook on existing and future possibilities of this new field of NIR applications.

• Journal of Radiation Protection and Research
• /
• 제35권1호
• /
• pp.34-42
• /
• 2010

현대 의학에서 방사선 이용 영역이 확대되고 비중이 커짐에 따라 개인 피폭선량을 줄이기 위한 노력을 하고 있는 가운데 가장 중요한 문제로 대두되고 있는 것이 방사선 기기에 관한 정도관리이다. 그래서 광주광역시 1차병원을 5개의 구로 나누어 각 구에서 임의로 10개소의 병원을 선정하여 정도관리 항목들의 실제 측정 실험과 광주지역 정도관리 현황에 대해 알아보고자 한다. 실험은 관전압, 관전류, 조사시간의 재현성 시험, 조도측정, 반가층 측정, 중심선속 일치 실험을 시행하였으며, 관전압 재현성 실험 결과 전체 50군데의 병원 합격률은 95.3%로 나타났고 관전류와 조사시간은 각각 77.0%의 합격률을 보였다. 조도는 86.0%의 합격률을 보였다. 반가층은 52.0%의 합격률을 보여 네개의 실험중 가장 낮은 합격률을 보였다. 중심선속 일치실험에서는 대체로 $1.5^{\circ}$ 이내로 중심선속이 일치하였으나 전체 50군데중 30.0%가 중심선속이 $3^{\circ}$이내로 벗어났다. 설문조사 결과로는 58.0%가 정도관리 주기에 대해 알고 있다고 답했으며, 50명 모두 현재 근무하는 병원에서 정도관리에 관한 교육을 받은 적이 없다고 답했다. 비교적 정도관리는 잘 이루어지고 있었지만 가장 시급한 문제는 정도관리의 중요성에 관한 인식이다. 따라서 방사선 작업 종사자들에게 전문적으로 안전관리에 관한 교육과 정확한 방사선 정도관리를 시행한다면 방사선 작업 종사자와 환자에 대한 피폭을 줄일 수 있으며 또한 적은 선량으로 질 높은 영상을 만들 수 있을 것으로 사료된다.

• 한국의학물리학회지:의학물리
• /
• 제29권4호
• /
• pp.123-136
• /
• 2018

The complex dose distribution and dose transfer characteristics of intensity-modulated radiotherapy increase the importance of precise beam data measurement and review in the acceptance inspection and preparation stages. In this study, we propose a process map for the introduction and installation of high-precision radiotherapy devices and present items and guidelines for risk management at the acceptance test procedure (ATP) and commissioning stages. Based on the ATP of the Varian and Elekta linear accelerators, the ATP items were checked step by step and compared with the quality assurance (QA) test items of the AAPM TG-142 described for the medical accelerator QA. Based on the commissioning procedure, dose quality control protocol, and mechanical quality control protocol presented at international conferences, step-by-step check items and commissioning guidelines were derived. The risk management items at each stage were (1) 21 ionization chamber performance test items and 9 electrometer, cable, and connector inspection items related to the dosimetry system; (2) 34 mechanical and dose-checking items during ATP, 22 multileaf collimator (MLC) items, and 36 imaging system items; and (3) 28 items in the measurement preparation stage and 32 items in the measurement stage after commissioning. Because the items presented in these guidelines are limited in terms of special treatment, items and practitioners can be modified to reflect the clinical needs of the institution. During the system installation, it is recommended that at least two clinically qualified medical physicists (CQMP) perform a double check in compliance with the two-person rule. We expect that this result will be useful as a radiation safety management tool that can prevent radiation accidents at each stage during the introduction of radiotherapy and the system installation process.

• 반도체디스플레이기술학회지
• /
• 제2권3호
• /
• pp.37-43
• /
• 2003

It is necessary to design the anti-vibration system of precision machinery for a quality assurance. However, in general, the allowable vibration limit is not well known. In this paper, the vibration criteria for foundation of sensitive machinery is proposed and anti-vibration system is designed by using vibration measurement results of foundation. Also, the finite element analysis is performed to verify the effectiveness of the designed anti-vibration system and to determine the allowable dynamic loads of precision measuring system. The results of this study will be helpful for the future design of anti-vibration structures with nano scale measuring system.

• 대한방사선기술학회지:방사선기술과학
• /
• 제41권6호
• /
• pp.595-602
• /
• 2018

Quality control (QC) of Computed Tomography (CT) devices is based on image quality measurement on AAPM CT phantom which is a standard phantom. Although it is possible to control the accuracy of the CT apparatus, it is expensive and has a disadvantage of low penetration rate. Therefore, in this study, we make image quality measurement phantom at low cost using FFF (Fused Filament Fabrication) type three-dimensional printer and try to analyze the usefulness, compare it with existing standard phantom. To print a phantom, We used three-dimensional printer of the FFF system and PLA (Poly Lactic Acid, density: $1.24g/cm^3$) filament, and the CT device of 64 MDCT (Aquilion CX, Toshiba, Japan). In addition, we printed a phantom using three-dimensional printer after design using various tool based on existing standard phantom. For image quality evaluation, AAPM CT phantom and self-generated phantom were measured 10 times for each block. The measured data were analyzed for significance using the Mannwhiteney U-test of SPSS (Version 22.0, SPSS, Chicago, IL, USA). As a result of the analysis, phantom fabricated with three-dimensional printer and standard phantom showed no significant difference (p>0.05). Furthermore, we confirmed that image quality measurement performance of a phantom using three-dimensional printer is similar to the existing standard phantom. In conclusion, we confirmed the possibility of low cost phantom fabrication using three dimensional printer.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2001년도 춘계학술대회논문집
• /
• pp.863-868
• /
• 2001

It is necessary to design th anti-vibration system of precision machinery for a sound operation and a quality assurance. However, in general. the allowable vibration limit is not well known. In the paper, the vibration criteria for foundation of vibration sensitive machinery is proposed and anti-vibration system is designed by using vibration measurement results of foundation. Also, the F.E. analysis is performed to verify the effectiveness of a designed anti-vibration system and to determine allowable dynamic load of machinery

• 한국건설관리학회논문집
• /
• 제10권2호
• /
• pp.34-45
• /
• 2009

우리나라 건설공사의 품질관리체계는 관련법에 근거한 규정의 조합과 시공자가 구축한 ISO/KS A 9001에 의한 품질경영 시스템의 운용에 의한 방법의 혼합형이다. 이 두 가지의 품질확보체계는 상호 보완적이며 통합된 체계로 운영되어야 하나, 시공자의 품질경영시스템을 활용하지 못하고 법에서 정한 기준과 방법, 절차 등의 규정에 따라 모든 공사에 있어서 일상화된 품질관리업무가 수행되고 있다. 이러한 현상은 ISO규격이 도입된 이래 지난 10여 년간 계속된 문제점으로 개선이 요구되고 있다. 품질관리의 철저를 목표로 고객 만족을 위한 예방적 품질관리사고를 정착하는 일은 건설산업의 당면과제이다. 이에 본 논문에서는 건설현장 의 실무자를 대상으로 품질관리 관련 의식에 관한 설문조사를 실시하였으며 그 결과를 토대로 건설공사 품질관리 체계의 운용에 대한 만족도를 정리하고, 나아가 향후의 개선방안에 대한 논점을 제시하고자 한다.

• 한국대기환경학회지
• /
• 제33권6호
• /
• pp.616-625
• /
• 2017

Measurements using five real-time particle samplers were compared to measurements using three NRM (National Reference Method system) filter-based samplers(Gravimetric method) at Incheon, Korea, between May and August, 2014. The purpose of this study was to suggest the quality assurance/quality control (QA/QC) method of each instrument for use in a real-time continuous particle sampler to measure the mass of airborne particles with an aerodynamic diameter less than $2.5{\mu}m$ ($PM_{2.5}$). Five real-time particle samplers of BAM1020, FH62C_14, TEOM, PM-711 and SPM-613 were evaluated by comparing its measured 23 hr average $PM_{2.5}$ concentrations with those measured with NRM filter-based samplers simultaneously. The parameters(e.g. Inlet heating condition, Slope factor, Film response, Intercept, Background, Span value) of the real-time samplers were optimized respectively by conducting test performance evaluation during 7 days in field sampling. For example, inlet heating temperature of TEOM sampler controls $35{\sim}40^{\circ}C$ to minimize the fluctuation of the real-time measurement data and background value of BAM1020 is the key factor affecting the accuracy of $PM_{2.5}$ mass concentration. We classified the $PM_{2.5}$ concentration according to relative humidity (80%) to identify water absorbed in aerosols by measuring the ${\beta}$-ray samplers(BAM1020, FH62C_14) and TEOM. ${\beta}$-ray samplers were not strongly affected by relative humidity that the difference of the average $PM_{2.5}$ concentration was about 5%. On the other hand, The TEOM sampler overestimated $PM_{2.5}$ mass concentration about 15% at low relative humidity (<80%).

• 산업경영시스템학회지
• /
• 제42권3호
• /
• pp.176-183
• /
• 2019

The environmental changes in the Korean cosmetic medical service industry in the $21^{st}$ century are forming intense competition among medical institutions due to the quantitative expansion of its market. For stable growth of the cosmetic medical service industry, continuous quality improvement is necessary based on empirical research on the quality of cosmetic medical services rather than external expansion. The purpose of this study is to classify the quality attributes of cosmetic medical service using Kano model and to derive the degree of satisfaction and dissatisfaction of each quality attributes through Customer Satisfaction Coefficient (CSC). Through this, the study identified strategic priorities and suggested specific step-by-step approaches and quality improvement priorities that can increase customer satisfaction using the Potential Customer Satisfaction Improvement Index (PCSI Index). Based on SERVPERF, this study used measurement tools consisting of five dimensions : tangibles, reliability, responsiveness, assurance, and empathy. In addition, it was used of measurement items reconstructed into positive, negative, and satisfaction questions for Kano model analysis, CSC analysis, and PCSI Index analysis. A total of 300 medical consumers who experienced cosmetic medical services for the past one year in medical institutions such as plastic surgery and dermatology were collected with convenient sampling. As a result, urgent items for improving the quality of service using the PCSI Index, 'Consideration for customer benefits' in empathy category was followed by 'Immediate help' and 'Sincere response' in responsiveness category, and 'Understanding customer needs' in empathy category, respectively. That is, it is required to improve human service quality attributes such as empathy and responsiveness rather than physical service quality attributes. This study contributes practically in that it provides specific and discriminatory approaches to improve customer satisfaction on cosmetic medical service quality and suggests improvement priorities.